Show commands
show vvb version
This command displays the Cisco VVB versions on the active partition and the inactive partition. The inactive version is displayed only if the inactive partition is available.
Command syntax
show vvb version
Requirements
Level privilege: 0
Command privilege level: 0
Allowed during upgrade: Yes
Example
admin:show vvb version Active VVB Version: 11.0.0.95000-245 Inactive VVB Version: NA Command successful.
show vvb components
This command displays the various components in Cisco VVB for which tracing can be turned on or off from CLI commands. This command is useful when you need the list of components to modify the trace settings of Cisco VVB.
Command syntax
show vvb components
Requirements
Level privilege: 0
Command privilege level: 0
Allowed during upgrade: Yes
Example
admin:show vvb components Various components are as follows - AppAdmin Engine
show vvb subcomponents
This command displays the various subcomponents in specific Cisco VVB component. This command is useful when you need the list of subcomponents to modify the trace settings of Cisco VVB.
Command syntax
show vvb subcomponents component [options]
Options
-
component—(Mandatory) Component such as Engine. For example, some of the VVB subcomponents for 'Engine' component are: -
APP_MGR
-
ARCHIVE_MGR
-
BOOTSTRAP_MGR
-
CFG_MGR
-
CHANNEL_MGR and so on
-
-
page—Displays the output one page at a time
Requirements
Level privilege: 0
Command privilege level: 0
Allowed during upgrade: Yes
Example
admin:show vvb subcomponents Engine
show vvb trace levels
This command displays the names and trace levels of the various Cisco VVB components and subcomponents. If the optional component is specified, then the trace settings of all the subcomponents of the specified component are displayed. If both the optional component and subcomponent are specified, then the trace settings of the specified subcomponent of the specified component are displayed.
Command syntax
show vvb trace levels [options]
Options
-
Component—Displays the trace levels of all the subcomponents of this component
-
Sub-component—Displays the trace levels of this subcomponent for the specified component. The trace levels can be displayed only if the component was specified
-
page—Displays the output one page at a time
-
file—Stores the output to a file instead of showing it on the console. The name of the file is displayed after the completion of the command
Requirements
Level privilege: 0
Command privilege level: 0
Allowed during upgrade: Yes
Example
admin:show vvb trace levels Engine SS_VB Trace settings for component "Engine" and module 'SS_VB' are ALARM = true DEBUGGING = false XDEBUGGING1 = false XDEBUGGING2 = false XDEBUGGING3 = false XDEBUGGING4 = false XDEBUGGING5 = false Command successful.
show vvb trace file size
This command shows the trace file size for the specified component.
Command syntax
show vvb trace file size [component]
Options
component—(Mandatory) Component such as Engine
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: Yes
Example
admin: show vvb trace file size Engine Trace file size for Engine is 3000000 bytes. Command Successful.
show vvb trace file count
This commands shows the trace file count for the specified component, which is the maximum number of trace files. The new file overwrites the older files.
Command syntax
show vvb trace file count [component]
Options
component—(Mandatory) Component such as Engine
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: Yes
Example
admin: show vvb trace file count Engine Trace file count for Engine is 300. Command Successful.
show vvb cache browser_cache_size
This command shows the currently allocated browser cache size in KB.
Command syntax
show vvb cache browser_cache_size
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: No
Example
admin:show vvb cache browser_cache_size 1000 KB Command successful.
show vvb cache dom_cache_capacity
This command shows the DOM cache capacity.
Command syntax
show vvb cache dom_cache_capacity
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: No
Example
admin:show vvb cache dom_cache_capacity 64 entries Command successful.
show vvb cache enable_browser_cache
This command shows if the browser cache is enabled where True is enabled and False is disabled.
Command syntax
show vvb cache enable_browser_cache
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: No
Example
admin:show vvb cache enable_browser_cache true Command successful.
show vvb cache enable_browser_cache_trace
This command shows if the browser cache trace is enabled.
Command syntax
show vvb cache enable_browser_cache_trace
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: No
Example
admin:show vvb cache enable_browser_cache_trace false Command successful.
show vvb cache extensions
This command shows the extensions used for Cisco VVB.
Command syntax
show vvb cache extensions
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: No
Example
admin:show vvb cache extensions jsp ircgi nohead testingExt Command successful.
show vvb cache max_file_size
This command shows the maximum cache size of a resource. If the size of the resource is more than this limit, resource will not be added to the cache.
Command syntax
show vvb cache max_file_size
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: No
Example
admin:show vvb cache max_file_size 1000 KB Command successful.
show vvb cache cache_entries
This command shows all or selected entries that are cached.
Command syntax
show vvb cache cache_entries <start_index> <end_index>
Options
<start_index>- (Optional) Provide start index entry number.
<end_index>- (Optional) Provide end index entry number.
Note |
The pound "#" sign, that is prefixed for size, indicates the entry is staled. |
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: No
Example 1
admin:show vvb cache cache_entries Total Cache size: 10000 KB Total Cache size used: 66 KB MaxFileSize: 9000 KB Total number of Cache Entries: 1 Number of Entries retrieved: 1 EntryType Size(Bytes) Cache Entry ---------------------------------------------------------------------- File 68192 http://10.78.0.112:7000/CVP/audio/3min.wav Command successful.
Example 2
admin:show vvb cache cache_entries 1 2 Total Cache size: 10000 KB Total Cache size used: 66 KB MaxFileSize: 9000 KB Total number of Cache Entries: 1 Number of Entries retrieved: 1 EntryType Size(Bytes) Cache Entry ---------------------------------------------------------------------- File 68192 http://10.78.0.112:7000/CVP/audio/3min.wav Command successful.
show vvb cache cache_entry <URL>
This command shows details, such as size and age, of a cache entry.
Command syntax
show vvb cache cache_entry <URL>
Options
URL- (Mandatory) Provide cache entry URL.
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: No
Example
admin:show vvb cache cache_entry http://10.11.12.13:7000/CVP/audio/ helloworld_audio.wav EntryType : File Cache Entry : http://10.11.12.13:7000/CVP/audio/helloworld_ audio.wav Size : 68192 Bytes Age : 09 minutes:19 seconds FreshTime : 0 CreationTime : 23/06/2015 15:40:59 Stale flag : true Command successful.
show vvb call active voice summary
This command shows active voice call summary.
Command syntax
show vvb call active voice summary
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: No
Example
admin:show vvb call active voice summary Total Concurrent Calls = 1 Total CPS = 0.1 Ringtone CPS = 0.0 Whisper CPS = 0.0 Agent Greeting CPS = 0.0 Others CPS = 0.1 Command successful.
show vvb call ccb disconnect-timeout
This command displays timer value used by CCB to wait for disconnect command response from Ingress Gateway.
Command syntax
show vvb call ccb disconnect-timeout
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: No
Example
admin:show vvb call ccb disconnect-timeout disconnect-timeout: 7 seconds Command successful.
show vvb call ccb intercept-timeout
This command displays timer value used by CCB to wait for intercept command response from Ingress Gateway.
Command syntax
show vvb call ccb intercept-timeout
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: No
Example
admin:show vvb call ccb intercept-timeout intercept-timeout: 4 seconds Command successful.
show vvb call ccb reconnect-timeout
This command displays timer value used by CCB to wait for reconnect command response from Ingress Gateway.
Command syntax
show vvb call ccb reconnect-timeout
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: No
Example
admin:show vvb call ccb reconnect-timeout reconnect-timeout: 70 seconds Command successful.
show vvb call app ringtone-timeout
This command shows the maximum duration that is set to play tone for the caller.
Command syntax
show vvb call app ringtone-timeout
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: No
Example
admin:show vvb call app ringtone-timeout ringtone-timeout:100 seconds Command successful.
show vvb call app whisper-timeout
This command shows the maximum duration that is set to play tone for the agent.
Command syntax
show vvb call app whisper-timeout [Value]
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: No
Example
admin:show vvb call app whisper-timeout whisper-timeout:12 seconds Command successful.
show vvb mrcp asr all
This command shows the number of sessions that are currently running on all ASR hosts.
Command syntax
show vvb mrcp asr all
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: No
Example
admin:show vvb mrcp asr all 10.11.12.13 : Concurrent = 0 , Aggregate [Success = 0 , Failure = 0 ] 11.12.13.14 : Concurrent = 0 , Aggregate [Success = 0 , Failure = 0 ] Total : Concurrent = 0 , Aggregate [Success = 0 Failure = 0 ] Command successful.
show vvb mrcp tts all
This command shows the number of sessions that are currently running on all TTS hosts.
Command syntax
show vvb mrcp tts all
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: No
Example
admin:show vvb mrcp tts all 10.11.12.13 : Concurrent = 0 , Aggregate [Success = 0 , Failure = 0 ] 11.12.13.14 : Concurrent = 0 , Aggregate [Success = 0 , Failure = 0 ] Total : Concurrent = 0 , Aggregate [Success = 0 , Failure = 0 ] Command successful.
show vvb mrcp asr host
This command shows the number of sessions that are currently running on a particular ASR host.
Command syntax
show vvb mrcp asr host <hostname>
Parameters
<hostname>—Provide ASR server IP address or hostname.
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: No
Example
admin:show vvb mrcp asr host 10.11.12.13 ASR Statistics : 10.11.12.13 Concurrent Sessions = 2 Aggregate Statistics : Successful Setups = 6 Unsuccessful Setups = 0 Command successful.
show vvb mrcp tts host
This command shows the number of sessions that are currently running on a particular TTS host.
Command syntax
show vvb mrcp tts host <hostname>
Parameters
<hostname>—Provide TTS server IP address or hostname.
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: No
Example
admin:show vvb mrcp tts host 11.12.13.14 11.12.13.14 : Concurrent = 0 , Aggregate [Success = 0 , Failure = 0 ] Command successful.
show vvb host-to-ip
Shows the user entries from /etc/hosts file.
Command syntax
show vvb host-to-ip
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: No
Example
admin:show vvb host-to-ip IPAddress HostName 10.11.12.13 vb250.cisco.com vb250 # 2016-06-14 12:57:02.99 10.11.12.14 vb100 mediaserver1 10.11.12.14 vb100 # 2016-06-14 12:57:09.899 10.11.12.15 vb100 mediaserver2 10.11.12.15 vb100 # 2016-06-14 12:58:18.197 10.11.12.17 vb100 "This is testing" 10.11.12.17 vb100 Command successful.
show vvb http client response timeout
Shows the http client response timeout details.
Command syntax
show vvb http client response timeout
Requirements
Level privilege: 1
Command privilege level: 1
Allowed during upgrade: No
admin:show vvb http client response timeout http fetch timeout:15 seconds Command successful.