The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter provides information about the codec types and codes that are used in the Call Detail Record fields.
The following table contains the compression and payload types that may appear in the codec fields.
1 |
NonStandard |
2 |
G711Alaw 64k |
3 |
G711Alaw 56k |
4 |
G711mu-law 64k |
5 |
G711mu-law 56k |
6 |
G722 64k |
7 |
G722 56k |
8 |
G722 48k |
9 |
G7231 |
10 |
G728 |
11 |
G729 |
12 |
G729AnnexA |
13 |
Is11172AudioCap |
14 |
Is13818AudioCap |
15 |
G.729AnnexB |
16 |
G.729 Annex AwAnnexB |
18 |
GSM Full Rate |
19 |
GSM Half Rate |
20 |
GSM Enhanced Full Rate |
25 |
Wideband 256K |
32 |
Data 64k |
33 |
Data 56k |
40 |
G7221 32K |
41 |
G7221 24K |
42 |
AAC |
43 |
MP4ALATM_NA |
44 |
MP4ALATM_64 |
45 |
MP4ALATM_56 |
46 |
MP4ALATM_128 |
47 |
MP4ALATM_48 |
48 |
MP4ALATM_32 |
49 |
MP4ALATM_24 |
80- |
GSM |
81 |
ActiveVoice |
82 |
G726 32K |
83 |
G726 24K |
84 |
G726 16K |
86 |
iLBC |
89 |
iSAC |
100 |
H261 |
101 |
H263 |
102 |
Vieo |
103 |
H264 |
104 |
H264_SVC |
105 |
T120 |
106 |
H224 |
107 |
T38Fax |
108 |
TOTE |
109 |
H265 |
110 |
H264_UC |
111 |
XV150_MR_711U |
112 |
NSE_VBD_711U |
113 |
XV150_MR_729A |
114 |
NSE_VBD_729A |
115 |
H264_FEC |
120 |
Clear_Chan |
222 |
Universal_Xcoder |
257 |
RFC2833_DynPayload |
258 |
PassThrough |
259 |
Dynamic_Payload_PassThru |
260 |
DTMF_OOB |
261 |
Inband_DTMF_RFC2833 |
299 |
NoAudio |
300 |
v150_LC_ModemRelay |
301 |
v150_LC_SPRT |
302 |
v150_LC_SSE |
The following tables contain call termination cause codes that may appear in the Cause fields in CDRs.
Note | Cause Code is defined in call control as Natural number. It is a 32 bit unsigned (long) positive integer with values ranging from 0 to +4,294,967,295. |
The following table contains the available Redirect Reason Codes that may appear in a record.
The following table contains the available OnBehalfof Codes that may appear in a CDR record.
34 |
NativeCallQueuing |
35 |
MobileCallType |