Command Line Interface Reference Guide for Cisco Unified Communications Solutions, Release 11.5(1)
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- June 21, 2017
Chapter: Unset Commands
Unset Commands
unset ipsec*
unset ipsec policy_group
This command disables the ipsec policy on the specified group.
unset ipsec policy_group policy_group
Syntax Description
| Parameters | Description |
|---|---|
| policy_group | Specifies the group name. |
Command Modes
Administrator (admin:)
Requirements
Command privilege level: 1
Allowed during upgrade: No
Applies to: Cisco Unified Communications Manager, IM and Presence service on Cisco Unified Communications Manager, Cisco Unity Connection
unset ipsec policy_name
This command disables the ipsec policy with the specified name.
unset ipsec policy_name policy_name
Syntax Description
| Parameters | Description |
|---|---|
| policy_name | Specifies the policy name to disable. |
Command Modes
Administrator (admin:)
Usage Guidelines
Enter ALL for policy_name to disable all policy names.
Requirements
Command privilege level: 1
Allowed during upgrade: No
Applies to: Cisco Unified Communications Manager, IM and Presence service on Cisco Unified Communications Manager, Cisco Unity Connection
unset network*
unset network cluster subscriber details
This command shows the message that you need to delete a subscriber node from the GUI instead of the command prompt.
unset network cluster subscriber details
Command Modes
Administrator (admin:)
Requirements
Command privilege level: 1
Allowed during upgrade: No
Applies to Cisco Unified Communications Manager, IM and Presence Service on Communications Manager, and Cisco Unity Connection
Message to delete the subscriber from GUI
admin: unset network cluster subscriber details Please use the Cisco Unified Communications Manager on the first node. Navigate to System > Server and click “Find”. Unable to del: NULL Executed command unsuccessfully.
unset network cluster subscriber dynamic-cluster-configuration
This command disables Dynamic Cluster Configuration on the publisher. The value of Dynamic Cluster Configuration option is set to zero on publisher.
unset network cluster subscriber dynamic-cluster-configuration
Command Modes
Administrator (admin:)
Requirements
Command privilege level: 1
Allowed during upgrade: No
Applies to Cisco Unified Communications Manager, IM and Presence Service on Cisco Unified Communications Manager, and Cisco Unity Connection
unset network dns options
This command unsets DNS options.
unset network dns options [ timeout ] [ attempts ] [ rotate ]
Syntax Description
| Parameters | Description |
|---|---|
| timeout | Sets the wait time before the system considers a DNS query as failed to the default. |
| attempts | Sets the number of DNS attempts to make before the system fails to the default. |
| rotate | Sets the method for selecting a nameserver to the default. This affects how loads are distributed across nameservers. |
Command Modes
Administrator (admin:)
Usage Guidelines
You are asked to confirm that you want to execute this command.
 Caution | If you continue, the system loses network connectivity temporarily. |
Requirements
Applies to: Cisco Unified Communications Manager, IM and Presence service on Cisco Unified Communications Manager, Cisco Unity Connection
unset network domain
This command unsets the domain name and restarts the server.
unset network domain
Command Modes
Administrator (admin:)
Usage Guidelines
You are asked to confirm that you want to execute this command.
Requirements
Applies to: Cisco Unified Communications Manager, IM and Presence service on Cisco Unified Communications Manager, Cisco Unity Connection
Example
admin: unset network domain
cmdSetIp.domain.name.change.warning
Continue (y/n)?
trying to restart system...
Warning: Restart could take up to 5 minutes...
Shutting down Service Manager. Please wait...
unset network ntp options
This command unsets the domain name and restarts the server.
unset network ntp options
Command Modes
Administrator (admin:)
Requirements
Command privilege level: 1
Allowed during upgrade: Yes
Applies to: Cisco Unified Communications Manager, IM and Presence service on Cisco Unified Communications Manager, Cisco Unity Connection
unset network ipv6 gateway
This command unsets the IPv6 gateway on the server.
unset network ipv6 gateway [ reboot ]
Syntax Description
| Parameters | Description | ||
|---|---|---|---|
| reboot |
Reboots the server after applying the change.
|
Command Modes
Administrator (admin:)
Requirements
Command privilege level: 1
Allowed during upgrade: Yes
Applies to: Cisco Unified Communications Manager, IM and Presence service on Cisco Unified Communications Manager, Cisco Unity Connection
unset network ipv6 static_address
This command unsets the IPV6 static address.
unset network ipv6 static_address [ reboot ]
Syntax Description
| Parameters | Description |
|---|---|
| reboot | Reboots the server after applying the change. |
Command Modes
Administrator (admin:)
Requirements
Command privilege level: 1
Allowed during upgrade: No
Applies to: Cisco Unified Communications Manager, Cisco Unity Connection
Example
admin: admin:unset network ipv6 static_address
W A R N I N G
The Server must be rebooted for these changes to take effect.
Please make sure that you reboot this server.
IPv6 static address was removed.
Feedback