PDF(555.7 KB) View with Adobe Reader on a variety of devices
ePub(75.9 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(81.4 KB) View on Kindle device or Kindle app on multiple devices
Updated:May 6, 2016
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Release Notes for Cisco Small Business SPA30X, SPA50X, and SPA51X IP Phone Firmware Version 7.6.2
First Published: May 6, 2016
These Release Notes describe the updates and fixes in version 7.6.2 of the Cisco Small Business SPA30X, SPA50X, and SPA51X IP Phone firmware.
As with any firmware release, read these release notes before you upgrade the firmware. Cisco also recommends that you back up the configuration before you perform any firmware upgrade.
Before You Upgrade
When you upgrade a Cisco SPA50X or Cisco SPA30X IP Phone, if you have installed a firmware version prior to 7.5.2b, you must first upgrade to 7.5.2b before you upgrade to release 7.5.3 or to a later release. See the following table for more information.
Firmware Release Installed on Your Phone
Special Instructions for Upgrading to Release 7.5.3 or Later
Upgrade to 7.5.2b first, then upgrade to 7.5.3 or later.
Firmware release 7.6.2 includes all customer-found defects that have been fixed after firmware release 7.6.1. For SPA5x5, the openssl upgrades to openssl-0.9.8zh.
New and Changed Features
The Mute Enable parameter allows you to enable or disable the Mute button. The default value is Yes.
New Parameters Added to TR69
The following table provides the details of all new parameters that have been added to TR69.
Note These parameters apply only to the Cisco Small Business SPA51X IP Phone.
The Disable Local Name To Header parameter fixes the SPA5x5 hunt group issue.
The options are No and Yes:
If No is selected, no changes are made. The default is No.
If Yes is selected, the following happens:
– Disables the display name in “Directory” and “Call History” in the “To” header during an outgoing call.
– Ignores the CLID in the “UPDATE” message.
– Redial list is populated based on 18x or 200 OK PAID header with or without Display Name.
User Web Password
The new User Web Password parameter eliminates the user requirement for daily password entry on the LCD GUI to use the basic functions. The basic functions include CFwd, Directory, Redial, and Corporate Directory.
The options are No and Yes:
If the User Password field is not empty, using this field restricts user access through the web interface and LCD GUI.
If the User Password field is empty, no password is needed to access the LCD GUI. However, the user must enter a password to access the web interface. This is the User Web Password parameter that was set earlier.
The SPA 30x/50x phone do not support font size 12, for Hebrew language.
The SPA phones do not support Xuser and Xpassword.
The SPA5x5 phone, displays the CFWD softkey for other call states (dialing), even if the CFWD service is disabled.
For SPA5x5/51x phone, the string, “Blind transfer number” is missing in XML Dictionary.
SPA525/5x5: change SIP Accept Encoding do not work for in-dialog subscribe.
The following caveats are resolved after release 7.6.1.
SPA5x5- hunt group issue(Gamma issue)
SPA5xxG: general issues due to codec mismatch
SPA5x5: Secure Calling S-RTP not display PAID as Caller ID
SPA5x5 Feature Request: No user password for CFwd, Dir, Redial, Corp Dir
SPA5x5: sidecar reordering during speed dial
SPA50x: Stops accepting RTP over TLS if unexpected sequence number
SPA5x5 Dual Registration causing invalid Cseq for Register message
SPA5x5 Leading digit from no. stripped during 18x resp if PAID name > 29
SPA504G: DNS query sending out more than 10 after DNS server unreachable
Vodafone SPA514G TR69 over https fail(SPA51x only)
TR69 server stuck in waiting for 'transfer complete' message from the phone.(SPA51x only)
SPA50x/SPA51x phone CDP transmits random during multicast storm
Behavior During Times of Network Congestion
Anything that degrades network performance can affect voice and video quality, and in some cases, can cause a call to drop. Sources of network degradation can include, but are not limited to, the following activities:
Administrative tasks, such as an internal port scan or security scan
Attacks that occur on your network, such as a Denial of Service attack
To reduce or eliminate any adverse effects to the devices, schedule administrative network tasks during a time when the devices are not being used or exclude the devices from testing.
Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation as an RSS feed and delivers content directly to your desktop using a reader application. The RSS feeds are a free service.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.