- Integration Description
- Planning the Usage of Voice Messaging Ports in Cisco Unity Connection
- Setting Up an Avaya Definity G3 In-Band TIMG Integration with Cisco Unity Connection
- Setting Up an Avaya S8500/S8700 In-Band TIMG Integration with Cisco Unity Connection
- Setting Up a Serial (SMDI, MCI, or MD-110) TIMG Integration with Cisco Unity Connection
- Testing the Integration
- Adding New User Templates for Multiple Integrations
- Application Note for the Intecom Pointspan 6880 TIMG Integration
- Application Note for the NEC NEAX 2400 IMX TIMG Integration
- Application Note for the Nortel SL-100 TIMG Integration
- Settings for TIMG Firmware Version 5.x
- Index
Contents
Index
A
Allow TRAP Connections (port setting) 1Answer Calls (port setting) 1application noteIntecom Pointspan 6880 1NEC NEAX 2400 IMX 1Nortel SL-100 1E
Enabled (port setting) 1Extension (port setting) 1I
Intecom Pointspan 6880application note 1configuring serial cable 1integrationIntecom Pointspan 6880, application note 1NEC NEAX 2400 IMX, application note 1Nortel SL-100, application note 1N
NEC NEAX 2400 IMX, application note 1Nortel SL-100application note 1configuring serial cable 1O
Outgoing Hunt Order (port setting) 1P
Perform Message Notification (port setting) 1portsconsiderations for Cisco Unity Connection cluster 1planning how many will answer calls 1planning how many will dial out 1planning setup 1settings 1S
Send MWI Requests (port setting) 1V
voice messaging ports, settings 1
Feedback