Preface
Introduction
This document describes the ISDN provisioning and troubleshooting for the Cisco BTS 10200 Softswitch. This document is intended for use by service provider management, system administration, and engineering personnel who are responsible for designing, installing, provisioning, and maintaining networks that use the Cisco BTS 10200 Softswitch system.
Organization
This document is divided into the following chapters:
•
Chapter 1 "ISDN Provisioning"—Describes ISDN provisioning for the Cisco BTS 10200 Softswitch. It provides the procedures to operate, manage, and troubleshoot ISDN signaling on the Cisco BTS 10200 Softswitch and voice gateways.
•Chapter 2 "Multiple Trunk Groups on a Single ISDN D Channel"—Describes provisioning multiple trunk groups on a single ISDN D channel.
•Chapter 3 "ISDN Backhaul Support using IUA/SCTP"—Describes the support of ISDN backhaul using ISDN Q.921-User Adaptation (IUA) and the Stream Control Transmission Protocol (SCTP).
•Chapter 4 "Maintaining and Troubleshooting the ISDN System"—Describes ISDN maintenance and troubleshooting commands and procedures for the Cisco BTS 10200 Softswitch.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.
Document Change History
The following table provides the revision history for the Cisco BTS 10200 Softswitch ISDN Guide, Release 6.0.4.
|
|
|
|
|
|---|---|---|---|
OL-25001-02 |
May 14, 2012 |
Initial |
Initial document for Release 6.0.4 |
Feedback