The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This document is the Provisioning Guide for the Cisco BTS 10200 Softswitch, Release 6.0.3.
This guide has the following chapters:
•Chapter 1 "Overview and Scripts"—Provides an overview of BTS provisioning and tools
•Chapter 2 "Call Agents and Feature Servers"—Describes how to provision BTS Call Agents (CAs) and Feature Servers (FSs)
•Chapter 3 "Subscribers"—Explains how to provision the BTS to communicate with different subscriber types
•Chapter 4 "CALEA"—Explains how to provision BTS interfaces to support the Communications Assistance for Law Enforcement Act (CALEA)
•Chapter 5 "Features"—Shows you how to add features to BTS subscribers using CLI commands
•Chapter 6 "Announcements, Centrex, MLHG, Voice Mail, and ENUM"—Discusses the announcement Centrex, MLHG, Voice Mail, and ENUM features supported by the BTS 10200
•Chapter 7 "Routes"— Describes how to provision the BTS 10200 to communicate with another BTS, PSTN gateway, or another call agent.
•Chapter 8 "Release Cause Codes and Announcement IDs"—Discusses the release cause codes and announcement IDs supported by the BTS 10200.
•Chapter 9 "Signaling"— Explains how to set up BTS signaling.
This table provides the revision history for the Cisco BTS 10200 Softswitch Provisioning Guide, Release 6.0.3.
|
|
|
|
---|---|---|---|
OL-25003-01 |
August 10, 2011 |
Initial |
Initial document for Release 6.0.3. |
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.