New and Changed Information
This section provides information on new features and changed behavior in Cisco UCS Manager, Release 3.1 (x).
New Features and Changed Behavior in Cisco UCS Manager, Release 3.1 (3)
|
Feature |
Description |
Where Documented |
|---|---|---|
|
Custom User Label – Asset Tag |
Service profiles now have a customer label field that is visible to the operating system or hypervisor running on the server through the SMBIOS asset tag field. |
|
|
Diagnostics |
The Cisco UCS Manager diagnostics tool enables you to verify the health of the hardware components on your servers. |
|
|
Hardware Change Discovery Policy |
When UCSM detects any change in the server hardware component, a critical “hardware inventory mismatch” fault is raised. You must acknowledge the server to clear the fault and complete the hardware inventory. |
|
|
Power Transition Log |
The Power Transition Log was added which logs the last five server power transitions, the power transition source timestamp of the latest power transition, and the count of the last consecutive server power transitions from the same source. |
|
|
Graphics Card Policies |
This release extends graphics card support to include the ability to change the graphics card mode from a graphics card policy. |
|
|
Smart SSD |
Cisco UCS Manager supports monitoring SSD health. This feature is called Smart SSD. |
New Features and Changed Behavior in Cisco UCS Manager, Release 3.1 (2)
|
Feature |
Description |
Where Documented |
|---|---|---|
|
Updated Power Sync Policy |
Cisco UCS Manager does not power on the blade server after shallow discovery when the power state for a service profile is set to ON. |
Feedback