The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter contains the following sections:
The following are the supported upgrade paths for Cisco UCS Director Express for Big Data, Release 3.0.
Follow this procedure to upgrade from Cisco UCS Director, Release 5.5 . If you need to upgrade from a release prior to version 5.4, you must first migrate to release 5.4, followed by an upgrade to Release 5.5. For more information on migrating to Release 5.4, see the Cisco UCS Director Upgrade Guide, Release 5.4 available at: http://www.cisco.com/c/en/us/support/servers-unified-computing/ucs-director/products-installation-guides-list.html.
Download the Cisco UCS Director Express for Big Data, Release 3.0patch from http://www.cisco.com.
Place the software in the FTP or HTTP server that you plan to use to install the upgrade.
Note | We recommend that you take a snapshot of the VM before you begin the upgrade. If you do this, you do not need to back up the existing configuration database through an FTP server. |