The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter contains the following sections:
From the Download Software site,
Step 1 | Log in to the current version of Cisco UCS Director Express for Big Data VM console after installing Cisco UCS Director Express for Big Data, Release 1.0 on Cisco UCS Director, Release 5.0 platform with the support for personality. | ||
Step 2 | In the
shelladmin, choose
Stop
Services to stop all services.
To verify that all services are stopped, choose Display Services Status. | ||
Step 3 | Choose Apply Patch to apply the patch application on Cisco UCS Director Express for Big Data. | ||
Step 4 | When prompted, enter the location of the Cisco UCS Director 5.2.0.1 patch (cucsd_patch_5_2_0_1.zip) . (For example, ftp://username:password@hostname|IP_address/software_location_and_name). | ||
Step 5 | Wait for the download and installation to complete for Cisco UCS Director, Release 5.2.0.1 patch that ensures Cisco UCS Director Express for Big Data, Release 1.0 to be available on Cisco UCS Director, Release 5.2.0.1 platform. | ||
Step 6 | Choose Apply Patch to apply the upgrade package on Cisco UCS Director Express for Big Data (UCSDExpress_Big_Data_1.1_Upgrade_Package.zip). | ||
Step 7 | When prompted,
choose
Start
Services to start services and complete the upgrade process.
| ||
Step 8 | When the patch application is complete, choose Show Version in shelladmin to verify the current version of Cisco UCS Director Express for Big Data. | ||
Step 9 | Log in to the Cisco UCS Director Express for Big Data GUI and start the BMA services after upgrading the Cisco UCS Director Express for Big Data Baremetal Agent . |