Statistics Subtab
You can launch the Cisco UCS Manager Server Statistics tab fromCisco UCS Central and view the statistical counters available for the selected component.
Name |
Description |
Toggle History Table button
|
Splits the right-hand pane vertically and displays the History table in the bottom portion of the pane. When you select a counter in the top portion of the pane, the History table displays the information recorded each time the data from that counter was collected.
|
Modify Collection Policy button
|
Open the General tab for the selected counter, which enables you to specify the collection and reporting intervals for the counter.
Note
|
This option is only available if a counter is selected.
|
|
Name column
|
A tree view showing the system components for which statistical counters are available. To view the counters associated with
a component, expand that part of the navigation tree. To view all counters, click + (plus sign) at the top of the chart.
System statistics for fabric interconnects and FEX are available. These include:
|
Value column
|
For the top-level component, this column shows the date and time the counter was last updated. For the actual counters, this
column shows the current value of the counter.
The unit the value is in can be determined by the code appended to the name of the counter:
-
(A)—Amperes
-
(babbles)
-
(bytes)—Number of bytes
-
(©)—Celsius
-
(collisions)—Number of times a network collision was encountered
-
(drops)—Number of times packets were dropped during the transfer
-
(errors)—Number of errors encountered
-
(lostCarrier)—Number of times the carrier was lost during transmission
-
(MB)—Megabytes
-
(noCarrier)—Number of times no carrier could be found
-
(packets)—Number of packets transferred
-
(pause)—Number of pauses encountered during data transmission
-
(resets)—Number or resets encountered during data transmission
-
(V)—Volts
-
(W)—Watts
-
(blank)
|
Avg column
|
The average value for the counter.
Note
|
For aggregated counters, this is the average delta within the reporting interval.
|
|
Max column
|
The maximum recorded value for the counter.
Note
|
For aggregated counters, this is the maximum delta within the reporting interval.
|
|
Min column
|
The minimum recorded value for the counter.
Note
|
For aggregated counters, this is the minimum delta within the reporting interval.
|
|
Delta column
|
The largest change recorded for the counter.
|
Chart Subtab
If you already created a chart during this session, the Chart tab displays that chart. Otherwise, when you navigate to the Chart tab, Cisco UCS Manager GUI displays the Select Statistics dialog box. This dialog box enables you to select one or two statistics to view as a line graph.
If you right-click the chart, you can access a pop-up menu with additional options. This menu enables you to:
-
Change the appearance of the chart by selecting Properties
-
Change the statistics displayed on the chart by selecting Configure Chart
-
Print the chart by selecting Print