- Preface
- Overview
- Installing the Server OS
- Managing the Server
- Viewing Server Properties
- Viewing Sensors
- Managing Remote Presence
- Managing User Accounts
- Configuring Network-Related Settings
- Managing Network Adapters
- Managing Storage Adapters
- Configuring Communication Services
- Managing Certificates
- Configuring Platform Event Filters
- Cisco IMC Firmware Management
- Viewing Faults and Logs
- Server Utilities
- BIOS Parameters by Server Model
- BIOS Token Name Comparison for Multiple Interfaces
- Index
Viewing Server Properties
This chapter includes the following sections:
- Viewing Server Properties
- Viewing a Server Utilization
- Viewing Cisco IMC Properties
- Viewing CPU Properties
- Viewing Memory Properties
- Viewing Power Supply Properties
- Viewing Storage Properties
- Viewing PCI Adapter Properties
- Viewing Network Related Properties
- Viewing TPM Properties
Viewing Server Properties
| Command or Action | Purpose |
|---|
This example displays server properties:
Server# show chassis detail
Chassis:
Power: on
Serial Number: QCI140205ZG
Product Name: UCS C210 M2
PID : R210-2121605W
UUID: FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF
Locator LED: off
Description: This shows the chassis details.
Server#
This example displays server properties for C3160 servers:
Server# show chassis detail
Chassis:
Power: on
Serial Number: FCH1821JAVL
Product Name: UCS C3160
PID : UCSC-C3X60-SVRNB
UUID: 84312F76-75F0-4BD1-9167-28B74EBB444C
Locator LED: off
Front Panel Locator LED: off
Description: This shows the chassis details
Server#
Viewing a Server Utilization
You can view a server utilization only on some UCS C-Series servers.
This example shows how to view the server utilization value:
Server# scope chassis Server /chassis # show cups-utilization CPU Utilization (%) Memory Utilization (%) I/O Utilization (%) Overall Utilization (%) -------------------- ----------------------- -------------------- ------------------------ 100 69 0 86 Server /chassis #
Viewing Cisco IMC Properties
 Note | Cisco IMC gets the current date and time from the server BIOS. To change this information, reboot the server and press F2 when prompted to access the BIOS configuration menu. Then change the date or time using the options on the main BIOS configuration tab. |
| Command or Action | Purpose |
|---|
This example displays Cisco IMC properties:
Server# show cimc detail
Cisco IMC:
Firmware Version: 2.0(8.122)
Current Time: Wed Dec 9 23:14:28 2015
Boot-loader Version: 2.0(8.122).36
Local Time: Wed Dec 9 23:14:28 2015 UTC +0000
Timezone: UTC
Reset Reason: graceful-reboot (This provides the last Cisco IMC reboot reason.)
Server#
Viewing CPU Properties
The server must be powered on, or the properties will not display.
| Command or Action | Purpose |
|---|
This example displays CPU properties:
Server# scope chassis Server /chassis # show cpu Name Cores Version ------------ -------- -------------------------------------------------- CPU1 4 Intel(R) Xeon(R) CPU E5520 @ 2.27GHz CPU2 4 Intel(R) Xeon(R) CPU E5520 @ 2.27GHz Server /chassis #
Viewing Memory Properties
The server must be powered on, or the properties will not display.
| Command or Action | Purpose |
|---|
This example displays memory properties:
Server# scope chassis Server /chassis # show dimm Name Capacity Channel Speed (MHz) Channel Type -------------------- --------------- ------------------- --------------- DIMM_A1 2048 MB 1067 Other DIMM_A2 2048 MB 1067 Other DIMM_B1 2048 MB 1067 Other DIMM_B2 2048 MB 1067 Other DIMM_C1 Not Installed Unknown Other DIMM_C2 Not Installed Unknown Other DIMM_D1 2048 MB 1067 Other DIMM_D2 2048 MB 1067 Other DIMM_E1 2048 MB 1067 Other DIMM_E2 2048 MB 1067 Other DIMM_F1 Not Installed Unknown Other DIMM_F2 Not Installed Unknown Other Server /chassis #
This example displays detailed information about memory properties:
Server# scope chassis
Server /chassis # show dimm detail
Name DIMM_A1:
Capacity: 2048 MB
Channel Speed (MHz): 1067
Channel Type: Other
Memory Type Detail: Synchronous
Bank Locator: NODE 0 CHANNEL 0 DIMM 0
Visibility: Yes
Operability: Operable
Manufacturer: 0x802C
Part Number: 18JSF25672PY-1G1D1
Serial Number: 0xDA415F3F
Asset Tag: Unknown
Data Width: 64 bits
Name DIMM_A2:
Capacity: 2048 MB
--More--
Server /chassis #
This example displays DIMM summary information:
Server# scope chassis
Server /chassis # show dimm-summary
DIMM Summary:
Memory Speed: 1067 MHz
Total Memory: 16384 MB
Effective Memory: 16384 MB
Redundant Memory: 0 MB
Failed Memory: 0 MB
Ignored Memory: 0 MB
Number of Ignored Dimms: 0
Number of Failed Dimms: 0
Memory RAS possible: Memory configuration can support mirroring
Memory Configuration: Maximum Performance
Server /chassis #
Viewing Power Supply Properties
The server must be powered on, or the properties will not display.
| Command or Action | Purpose |
|---|
This example displays power supply properties:
Server# scope chassis Server /chassis # show psu Name In. Power (Watts) Out. Power (Watts) Firmware Status ---------- -------------------- -------------------- -------- ---------- PSU1 74 650 R0E Present PSU2 83 650 R0E Present Server /chassis #
Note | Input Power and Maximum Output Power options are available only for some C-Series servers. |
Viewing Storage Properties
Viewing Storage Adapter Properties
The server must be powered on, or the properties will not display.
| Command or Action | Purpose | |||
|---|---|---|---|---|
| Step 1 | Server# scope chassis |
Enters the chassis command mode. | ||
| Step 2 | Server /chassis # show storageadapter [slot] [detail] |
Displays installed storage cards.
| ||
| Step 3 | Server /chassis # scope storageadapter slot |
Enters command mode for an installed storage card. | ||
| Step 4 | Server /chassis/storageadapter # show bbu [detail] |
Displays battery backup unit information for the storage card. | ||
| Step 5 | Server /chassis/storageadapter # show capabilites [detail] |
Displays RAID levels supported by the storage card. | ||
| Step 6 | Server /chassis/storageadapter # show error-counters [detail] |
Displays number of errors seen by the storage card. | ||
| Step 7 | Server /chassis/storageadapter # show firmware-versions [detail] |
Displays firmware version information for the storage card. | ||
| Step 8 | Server /chassis/storageadapter # show hw-config [detail] |
Displays hardware information for the storage card. | ||
| Step 9 | Server /chassis/storageadapter # show mfg-data [detail] |
Displays manufacturer data for the storage card. | ||
| Step 10 | Server /chassis/storageadapter # show pci-info [detail] |
Displays adapter PCI information for the storage card. | ||
| Step 11 | Server /chassis/storageadapter # show running-firmware-images [detail] |
Displays running firmware information for the storage card. | ||
| Step 12 | Server /chassis/storageadapter # show settings [detail] |
Displays adapter firmware settings for the storage card. | ||
| Step 13 | Server /chassis/storageadapter # show startup-firmware-images [detail] |
Displays firmware images to be activated on startup for the storage card. |
This example displays storage properties:
Server# scope chassis
Server /chassis # show storageadapter
PCI Slot Product Name Serial Number Firmware Package Build
-------- ---------------------------------- -------------- -------------------------
SAS LSI MegaRAID SAS 9260-8i SV93404392 12.12.0-0038
Product ID Battery Status Cache Memory Size
---- -------------- -------------- --------------
LSI Logic fully charged 0 MB
Server /chassis #
This example displays battery backup unit information for the storage card named SAS:
Server# scope chassis Server /chassis # scope storageadapter SAS Server /chassis/storageadapter # show bbu Controller Battery Type Battery Present Voltage Current Charge Charging State ---------- ------------ --------------- ---------- ---------- ------ -------------- SAS iBBU true 4.051 V 0.000 A 100% fully charged Server /chassis/storageadapter #
Viewing the Flexible Flash Controller Properties
| Command or Action | Purpose | |
|---|---|---|
| Step 1 | Server# scope chassis |
Enters the chassis command mode. |
| Step 2 | Server /chassis # show flexflash [detail] |
(Optional) Displays the available Cisco Flexible Flash controllers. |
| Step 3 | Server /chassis # scope flexflash index |
Enters the Cisco Flexible Flash controller command mode for the specified controller. At this time, the only permissible index value is FlexFlash-0. |
| Step 4 | Server /chassis/flexflash # show operational-profile [detail] | Displays the operational profile properties. |
This example displays the properties of the flash controller:
Server# scope chassis Server /chassis # show flexflash Controller Product Name Has Error Firmware Version Vendor Internal State ------------ ---------------- ---------- ----------------- -------- --------------- FlexFlash-0 Cisco FlexFlash No 1.2 build 247 Cypress Connected Server /chassis # scope flexflash FlexFlash-0 Server /chassis # show operational-profile Primary Member Slot I/O Error Threshold Host Accessible VDs -------------------- -------------------- -------------------- slot1 100 SCU Drivers Server /chassis/flexflash #
Viewing Physical Drive Properties
| Command or Action | Purpose | |
|---|---|---|
| Step 1 | Server# scope chassis |
Enters the chassis command mode. |
| Step 2 | Server /chassis # scope storageadapter slot |
Enters command mode for an installed storage card. |
| Step 3 | Server /chassis/storageadapter # show physical-drive [drive-number] [detail] |
Displays physical drive information for the storage card. |
| Step 4 | Server /chassis/storageadapter # show physical-drive-count [detail] |
Displays the number of physical drives on the storage card. |
| Step 5 | Server /chassis/storageadapter # scope physical-drive drive-number |
Enters command mode for the specified physical drive. |
| Step 6 | Server /chassis/storageadapter/physical-drive # show general [detail] |
Displays general information about the specified physical drive. |
| Step 7 | Server /chassis/storageadapter/physical-drive # show inquiry-data [detail] |
Displays inquiry data about the specified physical drive. |
| Step 8 | Server /chassis/storageadapter/physical-drive # show status [detail] |
Displays status information about the specified physical drive. |
This example displays general information about physical drive number 1 on the storage card named SAS:
Server# scope chassis
Server /chassis # scope storageadapter SAS
Server /chassis/storageadapter # scope physical-drive 1
Server /chassis/storageadapter/physical-drive # show general
Slot Number 1:
Controller: SAS
Enclosure Device ID: 27
Device ID: 34
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Link Speed: 6.0 Gb/s
Interface Type: SAS
Media Type: HDD
Block Size: 512
Block Count: 585937500
Raw Size: 286102 MB
Non Coerced Size: 285590 MB
Coerced Size: 285568 MB
SAS Address 0: 500000e112693fa2
SAS Address 1:
Connected Port 0:
Connected Port 1:
Connected Port 2:
Connected Port 3:
Connected Port 4:
Connected Port 5:
Connected Port 6:
Connected Port 7:
Power State: powersave
Server /chassis/storageadapter/physical-drive #
This example displays inquiry data about physical drive number 1 on the storage card named SAS:
Server# scope chassis
Server /chassis # scope storageadapter SAS
Server /chassis/storageadapter # scope physical-drive 1
Server /chassis/storageadapter/physical-drive # show inquiry-data
Slot Number 1:
Controller: SAS
Product ID: MBD2300RC
Drive Firmware: 5701
Drive Serial Number: D010P9A0016D
Server /chassis/storageadapter/physical-drive #
This example displays status information about physical drive number 1 on the storage card named SAS:
Server# scope chassis
Server /chassis # scope storageadapter SAS
Server /chassis/storageadapter # scope physical-drive 1
Server /chassis/storageadapter/physical-drive # show inquiry-data
Slot Number 1:
Controller: SAS
State: online
Online: true
Fault: false
Server /chassis/storageadapter/physical-drive #
Viewing Virtual Drive Properties
| Command or Action | Purpose | |
|---|---|---|
| Step 1 | Server# scope chassis |
Enters the chassis command mode. |
| Step 2 | Server /chassis # scope storageadapter slot |
Enters command mode for an installed storage card. |
| Step 3 | Server /chassis/storageadapter # show virtual-drive [drive-number] [detail] |
Displays virtual drive information for the storage card. |
| Step 4 | Server /chassis/storageadapter # show virtual-drive-count [detail] |
Displays the number of virtual drives configured on the storage card. |
| Step 5 | Server /chassis/storageadapter # scope virtual-drive drive-number |
Enters command mode for the specified virtual drive. |
| Step 6 | Server /chassis/storageadapter/virtual-drive # show physical-drive [detail] |
Displays physical drive information about the specified virtual drive. |
This example displays information about virtual drives on the storage card named SAS:
Server# scope chassis Server /chassis # scope storageadapter SAS Server /chassis/storageadapter # show virtual-drive Virtual Drive Status Name Size RAID Level -------------- --------------- ------------------------ ---------- ---------- 0 Optimal SLES1SP1beta5 30720 MB RAID 0 1 Optimal RHEL5.5 30720 MB RAID 0 2 Optimal W2K8R2_DC 30720 MB RAID 0 3 Optimal VD_3 30720 MB RAID 0 4 Optimal ESX4.0u2 30720 MB RAID 0 5 Optimal VMs 285568 MB RAID 0 6 Optimal RHEL6-35GB 35840 MB RAID 0 7 Optimal OS_Ins_Test_DR 158720 MB RAID 0 8 Optimal 285568 MB RAID 1 Server /chassis/storageadapter #
This example displays physical drive information about virtual drive number 1 on the storage card named SAS:
Server# scope chassis Server /chassis # scope storageadapter SAS Server /chassis/storageadapter # scope virtual-drive 1 Server /chassis/storageadapter/virtual-drive # show physical-drive Span Physical Drive Status Starting Block Number Of Blocks ----- -------------- ---------- -------------- ---------------- 0 12 online 62914560 62914560 Server /chassis/storageadapter/virtual-drive #
Viewing Nvidia GPU Card Information
These commands are not available on all UCS C-series servers.
The server must be powered on to view information on the Nvidia GPU cards.
| Command or Action | Purpose | |
|---|---|---|
| Step 1 | Server# scope chassis |
Enters the chassis command mode. |
| Step 2 | Server /chassis # show gpu | Displays the available Nvidia GPU cards on the system. |
| Step 3 | Server /chassis # scope gpu slot-number | Enters the GPU card command mode. Specify the slot number of the GPU card. |
| Step 4 | Server /chassis/gpu # show gpu-list | Displays temperature information on the GPU cards. |
This example shows how to view the temperature information of the available GPU cards on the system:
Server # scope chassis Server /chassis # show gpu Slot Product Name Num of GPUs ---- ------------ ----------- 5 Nvidia GRID K2 @ BD 2 Server /chassis # scope gpu 5 Server /chassis/gpu # show gpu-list GPU ID Temperature ------ ----------- 0 32 1 33 Server /chassis/gpu #
Viewing PCI Adapter Properties
The server must be powered on, or the properties will not display.
| Command or Action | Purpose |
|---|
This example displays PCI adapter properties:
Server# scope chassis Server /chassis # show pci-adapter Slot Vendor ID Device ID SubVendor ID SubDevice ID Firmware Version Product Name ---- --------- ---------- ------------ ------------- ---------------- ------------------- L 0x8086 0x1521 0x1137 0x008b 0x80000AA5... Intel(R) I350 1 Gbps N... 1 0x19a2 0x0710 0x10df 0xe702 4.6.142.10 Emulex OCe11102-FX 2 p... 3 0x10de 0x118f 0x10de 0x097f N/A Nvidia TESLA K10 P2055... 4 0x14e4 0x1639 0x14e4 0x1639 N/A Broadcom 5709 1 Gbps 2... 5 0x10de 0x0ff2 0x10de 0x1012 N/A Nvidia GRID K1 P2401-502 M 0x1000 0x0073 0x1137 0x00b1 N/A Cisco UCSC RAID SAS 20… Server /chassis #
Viewing Network Related Properties
Viewing LOM Properties
You can view the MAC addresses of the LAN On Motherboard (LOM) Ethernet ports.
| Command or Action | Purpose |
|---|
This example shows how to display the MAC addresses of the LOM ports:
Server# scope chassis Server /chassis # scope network-adapter L Server /chassis/network-adapter # show mac-list Interface ID MAC Address ------------- -------------------- eth0 010000002000 eth1 010000002000 Server /chassis/network-adapter #
Viewing TPM Properties
The server must be powered on, or the properties will not display.
| Command or Action | Purpose |
|---|
This example displays the TPM properties:
Server# scope chassis Server /chassis # show tpm-inventory Version Presence Enabled-Status Active-Status Ownership Revision Model Vendor Serial ------- -------- -------------- -------------- ---------- --------- ------------- -------- ----------- A equipped disabled deactivated unowned 1 UCSX-TPMX-00X ABC Inc FCHXXXXXXXX Server /chassis #
Feedback