To verify the
port-level policy that is installed, use the following commands. The interface
in the example below is the interface connected to the access point.
Device# show platform qos policies PORT
Loc Interface IIF-ID Dir Policy State
--- ------------------ ------------------ --- ------------------ ---------------
.
.
.
L:1 interface iif-id OUT port_child_policy INSTALLED IN HW
Device# show policy-map interface interface
interface
.
.
.
Class-map: non-client-nrt-class (match-any)
Match: non-client-nrt
0 packets, 0 bytes
5 minute rate 0 bps
Queueing
(total drops) 0
(bytes output) 68206789
bandwidth remaining ratio 7
Class-map: RT1-Class (match-any)
Match: dscp ef (46)
0 packets, 0 bytes
5 minute rate 0 bps
Match: dscp cs6 (48)
0 packets, 0 bytes
5 minute rate 0 bps
Priority: 10% (60000 kbps), burst bytes 1500000,
Priority Level: 1
Class-map: RT2-Class (match-any)
Match: dscp cs4 (32)
0 packets, 0 bytes
5 minute rate 0 bps
Match: dscp cs3 (24)
0 packets, 0 bytes
5 minute rate 0 bps
Priority: 20% (120000 kbps), burst bytes 3000000,
Priority Level: 2
Class-map: class-default (match-any)
Match: any
0 packets, 0 bytes
5 minute rate 0 bps
Queueing
(total drops) 0
(bytes output) 0
bandwidth remaining ratio 63
To verify an
SSID-level policy that is installed, use the following commands:
Device# show platform qos policies SSID
Loc Interface IIF-ID Dir Policy State
--- ------------- -------- --- ----------------------------- ---------------
.
.
.
L:1 interfaceID iif-id OUT SSID_output_policy INSTALLED IN HW
L:1 interfaceID iif-id OUT SSID_child_policy INSTALLED IN HW
Device# show policy-map interface wireless SSID name profileName
SSID profileName iifid: 0x0108B80000000025.0x00E447800000010B.0x00EF19000000012E
Service-policy output: SSID_output_policy
Class-map: class-default (match-any)
Match: any
0 packets, 0 bytes
30 second rate 0 bps
shape (average) cir 200000000, bc 800000, be 800000
target shape rate 200000000
queue-buffers ratio 0
bandwidth remaining ratio 70
Service-policy : SSID_child_policy
Class-map: RT1-Class (match-any)
Match: dscp ef (46)
0 packets, 0 bytes
30 second rate 0 bps
Match: dscp cs6 (48)
0 packets, 0 bytes
30 second rate 0 bps
Priority: Strict,
Priority Level: 1
police:
cir 15000000 bps, bc 468750 bytes
conformed 0 bytes; actions:
transmit
exceeded 0 bytes; actions:
drop
conformed 0000 bps, exceed 0000 bps
Class-map: RT2-Class (match-any)
Match: dscp cs4 (32)
0 packets, 0 bytes
30 second rate 0 bps
Match: dscp cs3 (24)
0 packets, 0 bytes
30 second rate 0 bps
Priority: Strict,
Priority Level: 2
police:
cir 30000000 bps, bc 937500 bytes
conformed 0 bytes; actions:
transmit
exceeded 0 bytes; actions:
drop
conformed 0000 bps, exceed 0000 bps
Class-map: class-default (match-any)
Match: any
0 packets, 0 bytes
30 second rate 0 bps
.
.
.
To verify a client-level policy that is installed, use the following
commands:
Device# show platform qos policies CLIENT
Loc Interface IIF-ID Dir Policy State
--- ---------------- ------ --- ----------------------------- ---------------
L:1 ClientMACAddress iif-id IN client_input_policy INSTALLED IN HW
.
.
.
Device# show policy-map interface wireless client mac ClientMACAddress
Client ClientMACAddress ..
.
.
.
Service-policy input: client-input-policy
Class-map: Voip-Data-Class (match-any)
Match: dscp ef (46)
0 packets, 0 bytes
30 second rate 0 bps
QoS Set
dscp ef
Class-map: Voip-Signal-Class (match-any)
Match: dscp cs3 (24)
0 packets, 0 bytes
30 second rate 0 bps
QoS Set
dscp cs3
Class-map: Multimedia-Conf-Class (match-any)
Match: access-group name MultiEnhanced-Conf
0 packets, 0 bytes
30 second rate 0 bps
QoS Set
dscp af41
Class-map: Transaction-Class (match-any)
Match: access-group name Transactional-Data
0 packets, 0 bytes
30 second rate 0 bps
QoS Set
dscp af21
Class-map: Bulk-Data-Class (match-any)
Match: access-group name Bulk-Data
0 packets, 0 bytes
30 second rate 0 bps
QoS Set
dscp cs1
Class-map: class-default (match-any)
Match: any
0 packets, 0 bytes
30 second rate 0 bps
QoS Set
dscp default
Device# show policy-map client mac-address ClientMACAddress service-policy input
Wireless Client QoS Service Policy
Policy Name : client_input_policy
Policy State : Installed
To verify a
radio-level policy, which is on by default, use the following command:
Device# show platform qos policies RADIO
Loc Interface IIF-ID Dir Policy State
--- ------------------ ------------------ --- ------------------ ---------------
L:1 R71187880340357388 0x00fce9000000010c OUT def-11an INSTALLED IN HW
.
.
.
To verify a QoS
policy based on the WLAN, use the following commands:
Device# show wlan name profileName | include Policy
AAA Policy Override : Disabled
QoS Service Policy - Input
Policy Name : unknown
Policy State : None
QoS Service Policy - Output
Policy Name : SSID-output-policy
Policy State : Validated
QoS Client Service Policy
Input Policy Name : client_input_policy
Output Policy Name : unknown
Radio Policy : All