Catalyst 2960 and 2960-S Software Configuration Guide, 12.2(55)SE
- Updated:
- October 17, 2016
Book Table of Contents
- Index
- Preface
- Overview
- Using the Command-Line Interface
- Assigning the Switch IP Address and Default Gateway
- Configuring Cisco IOS Configuration Engine
- Administering the Switch
- Configuring Web-Based Authentication
- Clustering Switches
- Managing Switch Stacks
- Configuring SDM Templates
- Configuring Switch-Based Authentication
- Configuring IEEE 802.1x Port-Based Authentication
- Configuring Interface Characteristics
- Configuring VLANs
- Configuring VTP
- Configuring Voice VLAN
- Configuring STP
- Configuring MSTP
- Configuring Optional Spanning-Tree Features
- Configuring Flex Links and the MAC Address-Table Move Update Feature
- Configuring DHCP Features and IP Source Guard
- Configuring Dynamic ARP Inspection
- Configuring IGMP Snooping and MVR
- Configuring Port-Based Traffic Control
- Configuring UDLD
- Configuring CDP
- Configuring LLDP, LLDP-MED, and Wired Location Service
- Configuring SPAN and RSPAN
- Configuring RMON
- Configuring System Message Logging
- Configuring SNMP
- Configuring Cisco IOS IP SLAs Operations
- Configuring Network Security with ACLs
- Configuring QoS
- Configuring Static IP Unicast Routing
- Configuring IPv6 Host
- Configuring IPv6 MLD Snooping
- Configuring EtherChannels and Link-State Tracking
- Troubleshooting
- Configuring Online Diagnostics
- Working with the Cisco IOS File System, Configuration Files, and Software Images
- Supported MIBs
- Unsupported Commands in Cisco IOS Release 12.2(55)SE
- Recommendations for Upgrading a Catalyst 2950 Switch to a Catalyst 2960 Switch
Notes
I
Feedback