Cisco Nexus 9000 Series NX-OS System Routing Messages Reference, Release 9.3(3)

AM

This section contains the AM messages.

AM-2

Error Message AM-2-API_INIT: Failed to initialize %s API

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-API_INITIALIZE: Failed to initialize %s API with rc=0x%x, %s

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-BAD_TIMER: %s

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-CLI_INIT: Failed to initialize CLI

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-INIT_FAIL: Initialization failure

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-MQ_OPEN: Failed to open message queue %s: %s

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-MTS_BIND: Failed to do mts_bind for %s: %s

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-MTS_OPC_SET: Failed to register with opcode %d: %s

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-MTS_RECV: MTS queue receive failed on %s queue: %s

Explanation An unexpected fatal error has occurred.

Recommended Action Reload the stack.

Error Message AM-2-MTS_SADDR_GET: Failed to get source of mts queue %s: %s

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-NO_WORKBIT: Failed to register %s too many notify clients

Explanation An unexpected fatal error has occurred.

Recommended Action Report the issue to Customer Support.

Error Message AM-2-REQD_COMP_DOWN: Required component \%s\ has gone down.

Explanation An unexpected fatal error has occurred.

Recommended Action Reload the stack.

Error Message AM-2-REQD_COMP_FAIL: Required component \%s\ has failed to initialize.

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-SDB_CREAT: Failed to create shared database

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-SDB_DESTROY: Failed to destroy shared database

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-SDB_OPEN: Failed to open shared database

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-SET_SCHED: Failed to set policy or priority

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-SHM_CREAT: Failed to create shared memory: %s

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-SHM_LOCK_CREAT: Failed to create shared memory lock: %s

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-SVR_REG: Failed to register as a client of %s for VRF %s

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-SYSMGR_NAME: Failed to get name from sysmgr during %s

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-SYSMGR_NOTIFY: Bad notification from sysmgr for %s

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-SYSMGR_QUERY: Failed to query sysmgr for %s

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-SYSMGR_UUID: Failed to get uuid from sysmgr during %s

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-THR_CREAT: Failed to create thread %s: error %d

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-THREAD_FAIL: Failed to start %s thread

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

Error Message AM-2-URIB_PIB: Unable to get pib for %s VRF from URIB

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

AM-3

Error Message AM-3-ADJ_LIMIT_REACHED: Adacency limit reached %d percent of capacity for %s address family: %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action Requires operator to intervene.

Error Message AM-3-BAD_PARAMS: Called %s with address family %d, iod %d, l3address %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message AM-3-CV_INIT: Couldn't init cond var %s

Explanation AM process failed to initialize conditional-variable resource.

Recommended Action Dump core, then restart component.

Error Message AM-3-DEL_PROT_ADJ: Unable to delete protocol adjacency for %s, uuid %d

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message AM-3-IF_INDEX: Invalid interface index received from %d

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message AM-3-IP_GLEAN_EXCESS_TRAFFIC: Excess traffic (%llu packets / %llu octets) were dropped in %s seconds for ungleaned prefix %s/32 on interface %s in vrf %s

Explanation Informational log about a system event.

Recommended Action Keep running, do nothing special.

Error Message AM-3-IPV6_GLEAN_EXCESS_TRAFFIC: Excess traffic (%llu packets / %llu octets) were dropped in %s seconds for ungleaned prefix %s/128 on interface %s in vrf %s

Explanation Informational log about a system event.

Recommended Action Keep running, do nothing special.

Error Message AM-3-MAC_REG_FAILED: Mac registration with L2FM failed for mac %s, iod %s, phy iod: %s

Explanation Mac registration with L2FM failed.

Recommended Action Keep running, do nothing special.

Error Message AM-3-MAX_RETRIES: Notification retry limit exceeded for %s

Explanation Client is not replying to our notifications.

Recommended Action Report the issue to Customer Support.

Error Message AM-3-MQ_RECV: Message queue receive failed on %s queue: %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message AM-3-MQ_SEND: Failed to send %s to %s queue: %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message AM-3-MSG_TO_TLV: Notification message to TLV failed

Explanation An unexpected but recoverable error has occurred.

Recommended Action No special action is required.

Error Message AM-3-MTS_DROP: MTS drop failed on %s queue: %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message AM-3-MTS_SEND: Failed to send %s to %s queue: %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message AM-3-MUTEX_INIT: Couldn't init mutex %s

Explanation AM process failed to initialize mutex system resource.

Recommended Action Dump core, then restart component.

Error Message AM-3-NO_AF: %s: Unable to get address family block for index %d

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message AM-3-NO_MEM: Malloc failed for %s %s

Explanation System may be low on memory.

Recommended Action Out of memory. Add more memory to the router.

Error Message AM-3-NO_PIB: Unable to get pib for client pid %d while processing %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message AM-3-NO_SMEM: Smalloc failed for %s %s

Explanation AM's shared memory quota may be used up, due to large number of adjacencies or a memory leak.

Recommended Action Out of memory. Add more memory to the router.

Error Message AM-3-PROT_ADJ_COUNT: Proto adj count is already 0 for iod %d

Explanation Received invalid Adj Delete.

Recommended Action Keep running, do nothing special.

Error Message AM-3-PT_ADD: Pt_add failed for %s %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message AM-3-PTHREAD_FAILED: pthread_create() failed for UFDM txlist thread()

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message AM-3-QUEUE: %s failed for %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message AM-3-READ_LOCK_HOLD: %s:%s():%d: Assert, read-lock not acquired

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message AM-3-RIB_RTE_CHG: Failed to send AM route changes to %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message AM-3-SHM_OPEN: Shared memory does not exist: %s

Explanation Informational log about a system event.

Recommended Action No special action is required.

Error Message AM-3-THR_MUTEX_LOCK: Failed to thread mutex lock

Explanation Failed function pthread_mutex_lock.

Recommended Action Reload the stack.

Error Message AM-3-THR_MUTEX_UNLOCK: Failed to thread mutex lock

Explanation Failed function pthread_mutex_unlock.

Recommended Action Reload the stack.

Error Message AM-3-TLV_TO_STRUCT: Notification TLV to struct failed

Explanation An unexpected but recoverable error has occurred.

Recommended Action No special action is required.

Error Message AM-3-TXLIST_CREATE: Couldn't create txlist for %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

AM-5

Error Message AM-5-INVALID_NOTIFY: Received invalid notification message

Explanation An unexpected but recoverable error has occurred.

Recommended Action No special action is required.

Error Message AM-5-MQ_MAJOR: Received unknown major message type (%d) from %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message AM-5-MQ_MINOR: Received unknown minor message type (%d) from %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message AM-5-MQ_UNEXP: Received unexpected message (%d/%d) on %s queue

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message AM-5-MSG_UNK: Received unknown % type: %u

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message AM-5-MTS_OPC_UNK: Received unknown MTS opcode %u

Explanation An unexpected but recoverable error has occurred.

Recommended Action No special action is required.

Error Message AM-5-REG_DELAY: AM register %s delay: %d seconds

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

AM-6

Error Message AM-6-FAILED_STATS: Failed to retrieve stats from FTM

Explanation Informational log about a system event.

Recommended Action No special action is required.

Error Message AM-6-SYSMAN_CLEANUP: Terminated by SYSMAN cleanup signal

Explanation Informational log about a system event.

Recommended Action No special action is required.

AM-7

Error Message AM-7-URIB_CNTXT: Failed to get Table_ID for %s on %s from %s (%d)

Explanation An unrecoverable software error has occurred during AM initialization.

Recommended Action Reload the stack.

AMT

This section contains the AMT messages.

AMT-2

Error Message AMT-2-SHM_LOCK_CREAT: Failed to create shared memory lock: %s

Explanation INITIALIZATION_FAILURE_EXPLANATION.

Recommended Action Reload the stack.

AMT-3

Error Message AMT-3-AMT_INIT: AMT init failed: %s

Explanation AMT process initialization failed.

Recommended Action Dump core, then restart component.

Error Message AMT-3-API_INIT: Couldn't initialize %s API

Explanation AMT failed to open API to interact with the component.

Recommended Action No special action is required.

Error Message AMT-3-BIND: bind() on %s failed: %s

Explanation AMT failed to bind UDP socket.

Recommended Action Dump core, then restart component.

Error Message AMT-3-COMP_DEREG: Unable to de-register with %s

Explanation AMT failed to de-register with a server component.

Recommended Action No special action is required.

Error Message AMT-3-COMP_REG: Unable to register with %s

Explanation AMT failed to register with a server component.

Recommended Action Dump core, then restart component.

Error Message AMT-3-DISC_NOT_ANYCAST: Relay Discovery packet from %s is addressed to %s, not an anycast address

Explanation An AMT Gateway sent Relay Discovery not using the Relay Anycast address.

Recommended Action Configure the network or router to decrease the number of routes.

Error Message AMT-3-IP_TUNNEL_LIMIT: Reach IP tunnel limit of %d

Explanation AMT process failed to create tunnel because the policy limit has been reached.

Recommended Action Configure the network or router to decrease the number of routes.

Error Message AMT-3-IPV6_TUNNEL_LIMIT: Reach IPv6 tunnel limit of %d

Explanation AMT process failed to create tunnel because the policy limit has been reached.

Recommended Action Configure the network or router to decrease the number of routes.

Error Message AMT-3-LIB_API_INIT: Couldn't initialize %s API

Explanation Failed to open AMT API to interact with the component.

Recommended Action No special action is required.

Error Message AMT-3-LIB_SM_CLOSE: Couldn't close shm segment %s

Explanation Process failed to remove shared memory resource.

Recommended Action No special action is required.

Error Message AMT-3-LIB_SM_OPEN: Couldn't open shm segment %s

Explanation Process failed to access AMT's shared memory.

Recommended Action Dump core, then restart component.

Error Message AMT-3-MALLOC: Private mem malloc (%u) failed in %s

Explanation AMT process is out of free private memory.

Recommended Action Configure the network or router to decrease the number of routes.

Error Message AMT-3-MRIB_ADD_ROUTE: MRIB add route failed in %s

Explanation AMT failed to add route in MRIB.

Recommended Action No special action is required.

Error Message AMT-3-MRIB_DEL_ROUTE: MRIB delete route failed in %s

Explanation AMT failed to delete route in MRIB.

Recommended Action No special action is required.

Error Message AMT-3-MRIB_UPDATE_ROUTE: MRIB update route failed in %s

Explanation AMT failed to update route in MRIB.

Recommended Action No special action is required.

Error Message AMT-3-MTS_DROP: Error returned from mts_drop(), errno: %s

Explanation AMT called a MTS API which returned an error.

Recommended Action Dump core, then restart component.

Error Message AMT-3-MTS_RECV: Error returned from mts_recv(), errno: %s

Explanation AMT called a MTS API which returned an error.

Recommended Action Dump core, then restart component.

Error Message AMT-3-NO_AMT_PAYLOAD: No AMT payload after stripping IP/IPv6 and UDP headers from %s, length: %d

Explanation AMT process received packet which is too short. The other side of the AMT tunnel has a protocol error.

Recommended Action Configure the network or router to decrease the number of routes.

Error Message AMT-3-NO_M_COPYBACK: m_copyack() failed in amt_receive_multicast_data()

Explanation AMT process failed to copy AMT multicast data into an mbuf for IP to replicate the packet.

Recommended Action No special action is required.

Error Message AMT-3-NO_M_GET: amt_receive_multicast_data() could allocate mbuf data structure

Explanation AMT process failed to allocate an mbuf data structure to forward AMT encapsulated data in an AMT Gateway.

Recommended Action No special action is required.

Error Message AMT-3-NO_SET_PRIORITY: Failed to set policy or priority

Explanation AMT process could not set itself process priority, exiting.

Recommended Action No special action is required.

Error Message AMT-3-PKT_BAD_NONCE: Nonce from Relay Advertisement packet from %s does not match Relay Discovery packet nonce, received 0x%08x, expected 0x%08x

Explanation There is a possible AMT spoof attack since the Advertise and Disocvery nonces do not match.

Recommended Action Configure the network or router to decrease the number of routes.

Error Message AMT-3-PKT_TOO_SHORT: Packet too short from %s

Explanation AMT process received packet which is too short. The other side of the AMT tunnel has a protocol error.

Recommended Action Configure the network or router to decrease the number of routes.

Error Message AMT-3-PT_ADD: Couldn't add %s to Patricia Trie

Explanation AMT failed to update the tunnel Patricia Trie.

Recommended Action No special action is required.

Error Message AMT-3-PT_DEL: Couldn't delete %s from local PT

Explanation AMT failed to delete the local route-table entry.

Recommended Action No special action is required.

Error Message AMT-3-PTHREAD_CREATE: Couldn't create thread %s

Explanation AMT process failed to create a task thread.

Recommended Action Dump core, then restart component.

Error Message AMT-3-RESTART_REASON: AMT process has restarted, restart reason: %s\n

Explanation AMT is restoring the routes it had added in previous instance.

Recommended Action No special action is required.

Error Message AMT-3-RLIMIT: Couldn't set AMT data segment size to %u

Explanation AMT process could not set itself memory resource limit, exiting.

Recommended Action No special action is required.

Error Message AMT-3-SETSOCKOPT: setsockopt() on %s failed: %s

Explanation AMT failed in UDP socket operation.

Recommended Action Dump core, then restart component.

Error Message AMT-3-SLAB_CREATE: Slab alloc of type %s failed

Explanation AMT process failed to allocate Slab memory.

Recommended Action Configure the network or router to decrease the number of routes.

Error Message AMT-3-SM_CREATE: Couldn't create shm segment %s

Explanation AMT process failed to initialize shared memory resource.

Recommended Action Dump core, then restart component.

Error Message AMT-3-SMALLOC: Shared mem malloc (%u) failed in %s

Explanation AMT process is out of free shared memory.

Recommended Action Configure the network or router to decrease the number of routes.

Error Message AMT-3-SOCKET: socket() for %s failed: %s

Explanation AMT failed to obtain UDP socket.

Recommended Action Dump core, then restart component.

Error Message AMT-3-TIMER_SET_INIT: Couldn't init %s active timer set

Explanation AMT failed to initialize timer resource.

Recommended Action Dump core, then restart component.

Error Message AMT-3-TUNNEL_FAILED: Could not allocate shared-memory for amt_tunneltype data structure

Explanation AMT process failed to create data structure to establish tunnel.

Recommended Action Configure the network or router to decrease the number of routes.

Error Message AMT-3-UDP_SENDTO: udp_sendto() failed to %s in %s, error: %s

Explanation AMT failed to send over UDP socket.

Recommended Action No special action is required.

Error Message AMT-3-UNKNOWN_MTYPE: Unknown mtype: %d/%d in %s

Explanation AMT process received unknown Interprocess message, dropped.

Recommended Action No special action is required.

AMT-6

Error Message AMT-6-RESTART_SHUTDOWN: AMT shutting self down via restart command

Explanation AMT process is shutting itself down due to the restart command.

Recommended Action No special action is required.

Error Message AMT-6-SHUTDOWN_SELF: AMT shutting self down

Explanation AMT process is shutting itself down.

Recommended Action No special action is required.

Error Message AMT-6-SHUTDOWN: Shutting down AMT process

Explanation PIM received a shutdown request.

Recommended Action No special action is required.

Error Message AMT-6-UNKNOWN_OPC: Received unknown mts opcode %d

Explanation AMT process received unknown Interprocess message, dropped.

Recommended Action No special action is required.

ARP

This section contains the ARP messages.

ARP-2

Error Message ARP-2-AM_PIB: Failed to acquire AM handle %s

Explanation An unrecoverable software error has occurred during arp initialization.

Recommended Action Reload the stack.

Error Message ARP-2-AM_REG: Failed to register as a client of AM %s

Explanation An unrecoverable software error has occurred during arp initialization.

Recommended Action Reload the stack.

Error Message ARP-2-API_INIT: Failed to initialize %s API

Explanation An unrecoverable software error has occurred during arp initialization.

Recommended Action Reload the stack.

Error Message ARP-2-API_INITIALIZE: Failed to initialize %s API with rc=0x%x, %s

Explanation An unrecoverable software error has occurred during arp initialization.

Recommended Action Reload the stack.

Error Message ARP-2-CLI_INIT: Failed to initialize CLI

Explanation An unrecoverable software error has occurred during arp initialization.

Recommended Action Reload the stack.

Error Message ARP-2-DUP_SRC_IP: Source address of packet received from %s on %s(%s) is duplicate of local, %s

Explanation There may be another router on this network that is configured with the same IP address.

Recommended Action Check all routers on the interface for misconfiguration.

Error Message ARP-2-DUP_SRCIP: Source address of packet received from %s on %s is duplicate of local, %s

Explanation There may be another router on this network that is configured with the same IP address.

Recommended Action Check all routers on the interface for misconfiguration.

Error Message ARP-2-INIT_FAIL: Initialization failure

Explanation An unrecoverable software error has occurred during arp initialization.

Recommended Action Reload the stack.

Error Message ARP-2-MQ_OPEN: Failed to open message queue %s: %s

Explanation An unrecoverable software error has occurred during arp initialization.

Recommended Action Reload the stack.

Error Message ARP-2-MQ_RECV: Message queue receive failed on %s queue: %s

Explanation An unexpected fatal error has occurred.

Recommended Action Reload the stack.

Error Message ARP-2-MTS_BIND: Failed to do mts_bind for %s: %s

Explanation An unrecoverable software error has occurred during arp initialization.

Recommended Action Reload the stack.

Error Message ARP-2-MTS_OPC_SET: Failed to register with opcode %d: %s

Explanation An unrecoverable software error has occurred during arp initialization.

Recommended Action Reload the stack.

Error Message ARP-2-MTS_RECV_FAIL: %s as MTS queue receive failed: %s

Explanation An unexpected fatal error has occurred.

Recommended Action Reload the stack.

Error Message ARP-2-MTS_RECV: MTS queue receive failed on %s queue: %s

Explanation An unexpected fatal error has occurred.

Recommended Action Reload the stack.

Error Message ARP-2-SET_SCHED: Failed to set policy or priority

Explanation An unrecoverable software error has occurred during arp initialization.

Recommended Action Reload the stack.

Error Message ARP-2-SHM_CREAT: Failed to create %s shared memory

Explanation An unrecoverable software error has occurred during arp initialization.

Recommended Action Reload the stack.

Error Message ARP-2-SVR_REG: Failed to register as a client of %s

Explanation An unrecoverable software error has occurred during arp initialization.

Recommended Action Reload the stack.

Error Message ARP-2-SYSMGR_NOTIFY: Bad notification from sysmgr for %s

Explanation An unrecoverable software error has occurred during arp initialization.

Recommended Action Reload the stack.

Error Message ARP-2-SYSMGR_QUERY: Failed to query sysmgr for %s

Explanation An unrecoverable software error has occurred during arp initialization.

Recommended Action Reload the stack.

Error Message ARP-2-SYSMGR_UUID: Failed to get uuid from sysmgr during %s

Explanation An unrecoverable software error has occurred during arp initialization.

Recommended Action Reload the stack.

Error Message ARP-2-THR_CREAT: Failed to create thread %s: error %d

Explanation An unrecoverable software error has occurred during arp initialization.

Recommended Action Reload the stack.

Error Message ARP-2-THREAD_FAIL: Failed to start %s thread

Explanation An unrecoverable software error has occurred during arp initialization.

Recommended Action Reload the stack.

Error Message ARP-2-TIMER_SET: Failed to initialize new timer set

Explanation An unrecoverable software error has occurred during arp initialization.

Recommended Action Reload the stack.

Error Message ARP-2-TIMERS_INIT: Failed to initialize timers

Explanation An unrecoverable software error has occurred during arp initialization.

Recommended Action Reload the stack.

ARP-3

Error Message ARP-3-ADJ_ADD_CONTROL: Failed to add adjacency by contol plane. Host ip address : %s

Explanation Due to this failure, Traffic forwarding to the host may be affected.

Recommended Action No special action is required.

Error Message ARP-3-ADJ_ADD_PEER_SYNC: Failed to add PS adjacency from L2RIB. Host ip address : %s

Explanation Due to this failure, Traffic forwarding to the host may be affected.

Recommended Action No special action is required.

Error Message ARP-3-ADJ_ADD: Failed to add adjacency for received packet from %s on %s

Explanation Due to this failure, packet forwarding to this address will be affected until the next successful retrial.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-ADJ_DEL_CONTROL: Failed to delete adjacency by contol plane. Host ip address : %s

Explanation Due to this failure, Traffic forwarding to the host continue to happen.

Recommended Action No special action is required.

Error Message ARP-3-ADJ_DEL_PEER_SYNC: Failed to delete PS adjacency from L2RIB. Host ip address : %s

Explanation Due to this failure, Traffic forwarding to the host continue to happen.

Recommended Action No special action is required.

Error Message ARP-3-ADJ_UPD: Failed to update adjacency for received packet from %s on %s

Explanation Due to this failure, packet forwarding will continue to use the existing ARP adjacency entry values.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-API_MQ_INVAL: ARP API Error: Invalid ARP message queue in %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action No special action is required.

Error Message ARP-3-API_MQ_SEND: ARP API Error: Failed to send %s to %s queue: %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action No special action is required.

Error Message ARP-3-API_MTS_INVAL: ARP API Error: Invalid ARP MTS queue in %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action No special action is required.

Error Message ARP-3-API_MTS_SEND: ARP API Error: Failed to send %s to %s queue: %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action No special action is required.

Error Message ARP-3-COUNT_MISMATCH: Mismatch between calculated and received adjacencies: Calculated:%d and Received:%d

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-DAI_FETCH_ERR: DAI lookup failed, callback function returned 0x%x (%s) for %s %s

Explanation DAI lookup failed.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-DUP_VADDR_SRC_IP: Source address of packet received from %s on %s(%s) is duplicate of local virtual ip, %s

Explanation There may be another router on this network that is configured with the same IP address.

Recommended Action Check all routers on the interface for misconfiguration.

Error Message ARP-3-DUP_VADDR_SRCIP: Source address of packet received from %s on %s is duplicate of local virtual ip, %s

Explanation There may be another router on this network that is configured with the same IP address.

Recommended Action Check all routers on the interface for misconfiguration.

Error Message ARP-3-DUP_VIRT_SRC_IP: Source address of packet received from %s on %s(%s) is duplicate of local virtual ip, %s

Explanation There may be another router on this network that is configured with the same IP address.

Recommended Action Check all routers on the interface for misconfiguration.

Error Message ARP-3-DUP_VIRT_SRCIP: Source address of packet received from %s on %s is duplicate of local virtual ip, %s

Explanation There may be another router on this network that is configured with the same IP address.

Recommended Action Check all routers on the interface for misconfiguration.

Error Message ARP-3-GRAT_ETH: Sending gratuitous arp for %s on invalid interface %s, not ethernet

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-GRAT_IOD: Sending gratuitous ARP for %s on an invalid interface %u

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-GRAT_IP: Sending gratuitous ARP request for %s IP address %s on %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-GRAT_NON_AM: Sending gratuitous arp for %s on invalid interface %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-GRAT_P2P: Sending gratuitous arp for %s on invalid interface %s, point-to-point

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-HDR_ERR: Failed to get ARP header, expected %d, got %d bytes

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-HDR_L2LEN_ERR: Received packet with incorrect layer 2 address length (%d bytes), %s with S/D MAC: %s %s eff_ifc %s(%ld), log_ifc %s(%ld), phy_ifc %s(%ld)

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-HDR_L3LEN_ERR: Received packet with incorrect layer 3 address length (%d bytes)

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-IF_INDEX: Invalid interface index received from %d

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-IM_EXT: Couldn't set IM-extension for interface %s

Explanation ARP process failed to set IM extension.

Recommended Action No special action is required.

Error Message ARP-3-INVAL_HDR_HRD_TYPE: Found incorrect hardware type in ARP header: %hu, source-mac : %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-INVAL_HDR_PROT_TYPE: Found incorrect protocol type in ARP header: 0x%x

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-INVAL_STATE: Unrecognized ARP entry state in timer callback: %u

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-MAC_ERR: Failed to get MAC address on %s for %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action No special action is required.

Error Message ARP-3-MBUF_ERR: Failed to get the remainder of packet, expected %d, got %d bytes

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-MTS_DROP: MTS drop failed on %s queue: %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-NO_MBUF: Failed to allocate buffer for %s

Explanation The system may have run out of packet memory buffers.

Recommended Action Report the issue to Customer Support.

Error Message ARP-3-NO_MEM: Malloc failed for %s %s

Explanation The system may be low on memory.

Recommended Action Out of memory. Add more memory to the router.

Error Message ARP-3-NO_SMEM: Shared memory allocation failed for %s %s

Explanation ARP Shared memory might be used up.

Recommended Action Out of memory. Add more memory to the router.

Error Message ARP-3-PKT_ENCAP: Failed to encapsulate packet

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-PKT_OUT: Failed to send packet to PM

Explanation PM's message queue may be temporarily full.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-REQ_ADD: Failed to add adjacency while sending request for %s on %s, request from pid: %d

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-REQ_ETH: Sending ARP request for %s on invalid interface %s, not ethernet, request from pid: %d

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-REQ_IOD: Sending ARP request for %s on an invalid interface %u, request from pid: %d

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-REQ_IP: Dropping ARP request for %s IP address %s on %s, request from pid: %d

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-TIMER_RSTART: Failed to restart timer 0x%p for %s on %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action No special action is required.

Error Message ARP-3-VRRP_ETH: Adding vrrp arp for %s: invalid interface %s, not ethernet

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-VRRP_IOD: Adding vrrp arp for %s: invalid interface %u

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-VRRP_NON_AM: Sending vrrp arp for %s on invalid interface %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-VRRP_P2P: Sending vrrp arp for %s on invalid interface %s, point-to-point

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-VRRPQ_ADD: Failed to add VRRP queue entry for %s, %s on %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-3-VRRPQ_IP: Trying to add invalid IP address %s on %s to vrrp queue

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

ARP-4

Error Message ARP-4-DIR_BCAST: %s address of packet received from %s on %s matches directed broadcast address, %s

Explanation There may be a configured subnet mask-length mismatch among router interfaces connected on this LAN.

Recommended Action Check all routers on the interface for misconfiguration.

Error Message ARP-4-DUP_IP: ARP entry found with duplicate IP address %s on %s

Explanation There may be another router on this network that is configured with the same IP address.

Recommended Action Check all routers on the interface for misconfiguration.

Error Message ARP-4-INVAL_IP: Received packet with invalid %s IP address (%s) from %s on %s

Explanation There may be a connected router sending packets with a bogus IP address.

Recommended Action Check all routers on the interface for misconfiguration.

Error Message ARP-4-INVAL_MAC: Received packet with invalid %s MAC address (%s) from %s on %s

Explanation There may be a connected router sending packets with a bogus MAC address.

Recommended Action Check all routers on the interface for misconfiguration.

Error Message ARP-4-OWN_SRCMAC: Received packet with a local source MAC address (%s) from %s on %s

Explanation There may be a connected router sending packets with local MAC address.

Recommended Action Check all routers on the interface for misconfiguration.

ARP-5

Error Message ARP-5-MQ_MINOR: Received unknown minor message type (%d) from %s

Explanation An unexpected but recoverable error has occurred.

Recommended Action No special action is required.

Error Message ARP-5-MQ_UNEXP: Received unexpected message (%d/%d) on %s queue

Explanation An unexpected but recoverable error has occurred.

Recommended Action No special action is required.

Error Message ARP-5-MSG_UNK: Received unknown % type: %u

Explanation An unexpected but recoverable error has occurred.

Recommended Action No special action is required.

Error Message ARP-5-MTS_OPC_UNK: Received unknown MTS opcode %u

Explanation An unexpected but recoverable error has occurred.

Recommended Action No special action is required.

Error Message ARP-5-UNK_IP_NOTIF: Unrecognized IP address change notification type %u

Explanation An unexpected but recoverable error has occurred.

Recommended Action No special action is required.

Error Message ARP-5-UNK_MSG_MINOR: Unrecognized %s message minor type %d

Explanation An unexpected but recoverable error has occurred.

Recommended Action No special action is required.

Error Message ARP-5-UNK_SIG: Received unknown signal %d

Explanation An unexpected but recoverable error has occurred.

Recommended Action No special action is required.

ARP-6

Error Message ARP-6-REQ_NON_AM: Sending ARP request for %s on invalid interface %s request from pid: %d

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-6-REQ_P2P: Sending ARP request for %s on invalid interface %s, point-to-point, request from pid: %d

Explanation An unexpected but recoverable error has occurred.

Recommended Action Keep running, do nothing special.

Error Message ARP-6-SYSMAN_CLEANUP: Terminated by SYSMAN cleanup signal

Explanation Informational log about a system event.

Recommended Action No special action is required.

ATIMERS

This section contains the ATIMERS messages.

ATIMERS-3

Error Message ATIMERS-3-ERROR: %s

Explanation An active timer API returned error. Parameters are: Error

Recommended Action No special action is required.

Error Message ATIMERS-3-OPER: timer failed to %s, error %s

Explanation An active timer API returned error. Parameters are: timer operation, reason

Recommended Action No special action is required.

Error Message ATIMERS-3-START: starting timer 0x%p: heap not allocated for set id %u

Explanation An active timer API returned error. Parameters are: timer, Set ID

Recommended Action No special action is required.

Error Message ATIMERS-3-STOP: stopping timer 0x%p: heap not allocated for set id %u\n

Explanation An active timer API returned error. Parameters are: timer, Set ID

Recommended Action No special action is required.

BGP

This section contains the BGP messages.

BGP-2

Error Message BGP-2-AFINIT: Error initializing address family, (%d)

Explanation An unrecoverable error has occured during BGP initialization.

Recommended Action Restart component.

Error Message BGP-2-AFINITFUNCS: Error initializing address family function vectors, (%d)

Explanation An unrecoverable error has occured during BGP initialization.

Recommended Action Restart component.

Error Message BGP-2-APIINIT: Unable to initialize %s API

Explanation An unrecoverable error has occured during BGP initialization. Parameters are: Server Name

Recommended Action Restart component.

Error Message BGP-2-APIMTSBIND: Unable to bind to MTS SAP for %s, sap %d: %s

Explanation BGP client was not able to create a message queue for communication. Parameters are: Queue name, MTS SAP, Error

Recommended Action Restart component.

Error Message BGP-2-ATTACH: Unable to attach to %s

Explanation An unrecoverable error has occured during BGP initialization. Parameters are: Server Name

Recommended Action Restart component.

Error Message BGP-2-EVPN_STATIC_MAC: Static/learnt MAC address conflict for %s in VNI %lu

Explanation Conflict with either local or remote static MAC configuration.

Recommended Action Keep running, do nothing special.

Error Message BGP-2-FATAL: Fatal error: %s: %s

Explanation An unexpected fatal error has occured. Parameters are: Error Type, Error

Recommended Action Restart component.

Error Message BGP-2-IPV6REG: Unable to register with IPv6

Explanation An unrecoverable error has occured during BGP initialization.

Recommended Action Restart component.

Error Message BGP-2-MQLOOP_INIT: Message queue loop %s, %s, Error - %s

Explanation An unrecoverable error has occured during BGP initialization. Parameters are: MQLoop Type, Failure Type, Error

Recommended Action Restart component.

Error Message BGP-2-MTSBIND: Unable to bind to MTS SAP for %s, sap %d: %s

Explanation BGP was not able to create a message queue for communication. Parameters are: Queue name, MTS SAP, Error

Recommended Action Restart component.

Error Message BGP-2-PEERSHALTED: BGP %s shutdown due to no memory condition (%s)

Explanation The system may be low on memory. Parameters are: Peer(s), Error

Recommended Action Out of memory. Add more memory to the router.

Error Message BGP-2-PTHREAD: procket_pthread_create failed for %s: error %d

Explanation An unexpected fatal error has occured. Parameters are: Thread Name, Error

Recommended Action Restart component.

Error Message BGP-2-SRVREG: Unable to register with %s

Explanation An unrecoverable error has occured during BGP initialization. Parameters are: Server Name

Recommended Action Restart component.

Error Message BGP-2-SYSMGR_CONDVERIF: Sysmgr conditional verify failed

Explanation An internal software error occured.

Recommended Action Restart component.

Error Message BGP-2-SYSMGR_QUERY: Failed to query sysmgr for %s

Explanation An internal software error occured.

Recommended Action Restart component.

Error Message BGP-2-TSP_INIT: Unable to initialize with TSP

Explanation An unrecoverable error has occured during BGP initialization.

Recommended Action Restart component.

Error Message BGP-2-U6RIBREG: Unable to register with U6RIB for [afi/safi:%d/%d]

Explanation An unrecoverable error has occured during BGP initialization.

Recommended Action Restart component.

Error Message BGP-2-UNKNOWNFATAL: Unknown fatal error %d: %s

Explanation An unexpected fatal error has occured. Parameters are: Error Type, Error

Recommended Action Restart component.

Error Message BGP-2-URIBREG: Unable to register with URIB for [afi/safi:%d/%d]

Explanation An unrecoverable error has occured during BGP initialization.

Recommended Action Restart component.

BGP-3

Error Message BGP-3-ACLTESTADD: Failed to add %s peer policy test

Explanation An internal software error occured. Parameters are: ACL type

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-AGGADD: [%s] Couldn't add aggregate for %s/%d

Explanation BGP was unable to store an aggregate in an internal datastructure. The BGP process may have run out of memory.

Recommended Action If BGP ran out of memory, add memory to the router or change the network configuration to decrease memory requirements. Clear any BGP peers that may have been shut down automatically. If BGP has memory available, there was an internal error, restart BGP.

Error Message BGP-3-AGGDEL: [%s] Couldn't delete aggregate for %s/%d

Explanation An unexpected but handleable event has occured. Parameters are: Address-family, Prefix/masklength

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-ALLOCFAIL: %s malloc (%ld) failed for: %s

Explanation The system may be low on memory. Parameters are: Alloc Type, Size, Error

Recommended Action Out of memory. Add more memory to the router.

Error Message BGP-3-API_UNEXP_RESP: Received unexpected message from SAP %d, opcode %d, address %s, ignore it

Explanation An unexpected but handleable event has occured. Parameters are: MTS SAP, MTS Opcode, IP Address

Recommended Action Keep running, do nothing special.

Error Message BGP-3-APIASSERT: %s:%d: Assertion `%s' failed.

Explanation An internal software error occured. Parameters are: File Name, Line Number, Assert Type

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-APIMTSDROP: MTS drop failed on %s queue: %s

Explanation An unexpected but handleable event has occured. Parameters are: Queue name, Error

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-APIMTSRECV: MTS receive failed on %s queue: %s

Explanation An unexpected but handleable event has occured. Parameters are: Queue name, Error

Recommended Action Keep running, do nothing special.

Error Message BGP-3-APIMTSSEND: MTS send() error to SAP %d, opcode %d: %s

Explanation An unexpected but handleable event has occured. Parameters are: MTS SAP, MTS Opcode, Error

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-APPLY_BESTPATH_CFG: Failed to apply bestpath configuration: %s

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-ASLEN: AS-PATH prepend length exceeds internal limit

Explanation An internal limit was hit in prepending and AS path.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-ASPREPEND: Expected AS sequence or entry sequence, got %d/%d

Explanation An error was encountered in prepending to an AS path. Parameters are: Segment Type, Segment Length

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-ASSERT: %s:%d: Assertion `%s' failed.

Explanation An internal software error occured. Parameters are: File Name, Line Number, Assert Type

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-ATTRAVL_OP: Failed attribute external database operation: %s, id %lu

Explanation BGP was unable to perform an attribute external database operation. Parameters are: Operation, Attr ID

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-ATTRID_OP: Failed to %s attribute ID

Explanation BGP was unable to allocate or free an index for a BGP PATH attribute block. Parameters are: Allocate or free

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-BADLOCALAS: VRF %s, Peer %s - bad AS sent in Open message %u.

Explanation The peer received an incorrect AS Number.

Recommended Action Check that the peering router is configured correctly. Clear the peer if necessary after any change.

Error Message BGP-3-BADNEXTHOP: [%s] Peer %s advertised non-mapped nexthop %s in MP reach attr [afi/safi:%d/%d], dropping NLRI

Explanation The router received a next-hop that was inconsistent with the address-family in the update message. Parameters are: Address-family, Peer, Nexthop address, AFI, SAFI

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-BADOPENCAP: VRF %s, Peer %s - bad capability code received %u.

Explanation The peer sent a bad/unknown capability.

Recommended Action Check that the peering router is configured correctly. Clear the peer if necessary after any change.

Error Message BGP-3-BADOPENPARAM: VRF %s, Peer %s - unknown optional parameter received %u.

Explanation The peer sent an unknown optional parameter.

Recommended Action Check that the peering router is configured correctly. Clear the peer if necessary after any change.

Error Message BGP-3-BADPEERAS: VRF %s, Peer %s - bad remote-as, expecting %s%s%s received %s.

Explanation The peer sent an incorrect AS Number.

Recommended Action Check that the peering router is configured correctly. Clear the peer if necessary after any change.

Error Message BGP-3-BADPEERDYNAS: VRF %s, Peer %s - bad remote-as, failed route-map %s received %s.

Explanation The peer sent an AS Number that did not match route-map.

Recommended Action Check that the peering router is configured correctly. Clear the peer if necessary after any change.

Error Message BGP-3-BADPEERHOLDTIME: VRF %s, Peer %s - bad hold time %s %d.

Explanation The peer sent and/or received an incompatible hold time.

Recommended Action Check that the peering router is configured correctly. Clear the peer if necessary after any change.

Error Message BGP-3-BADPEERRID: VRF %s, Peer %s - bad router-id %s %s.

Explanation The peer sent and/or received a bad router-id.

Recommended Action Check that the peering router is configured correctly. Clear the peer if necessary after any change.

Error Message BGP-3-BFD_SEND_AUTO_EXPIRY: Unable to start BFD staling, error %s(0x%08x)

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-BFD_SEND_EXPIRE_NOW: Unable to expire staled BFD sessions, error %s(0x%08x)

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-BFD_SES_ADD: Unable to add BFD session for peer %s, error %s

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-BFD_SES_CREATE: Unable to create BFD session Id for peer %s, error %s

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-BFD_SES_REMOVE_ALL: Unable to cleanup the BFD sessions during deconfiguration, error %s(0x%08x)

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-BFD_SES_REMOVE: Unable to remove BFD session for peer %s, error %s

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-BFD_SES_STALE: Unable to stale BFD session for peer %s, error %s

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-BRIB_ADD_INT: Internal error in adding to BRIB: %s

Explanation An internal error was encountered in adding a path to the BRIB. The BGP process may have run out of memory. Parameters are: Error

Recommended Action If BGP ran out of memory, add memory to the router or change the network configuration to decrease memory requirements. Clear any BGP peers that may have been shut down automatically. If BGP has memory available, there was an internal error, restart BGP.

Error Message BGP-3-BRIB_ESADD: [%s] Couldn't add ES %s to BRIB

Explanation BGP was unable to create an EVPN instance.The BGP process may have run out of memory. Parameters are: Address-family, EVI

Recommended Action If BGP ran out of memory, add memory to the router or change the network configuration to decrease memory requirements. Clear any BGP peers that may have been shut down automatically. If BGP has memory available, there was an internal error, restart BGP.

Error Message BGP-3-BRIB_EVIADD: [%s] Couldn't add EVI %d to BRIB

Explanation 

Recommended Action 

Error Message BGP-3-BRIB_RDADD: [%s] Couldn't add rdinfo %s to BRIB

Explanation BGP was unable to add a prefix to the BGP RIB. The BGP process may have run out of memory. Parameters are: Address-family, RDinfo

Recommended Action If BGP ran out of memory, add memory to the router or change the network configuration to decrease memory requirements. Clear any BGP peers that may have been shut down automatically. If BGP has memory available, there was an internal error, restart BGP.

Error Message BGP-3-BRIB_RDCLASH: VRF %s, %s: RD clash found during %s

Explanation BGP was unable to allocate RD for the BGP RIB. The BGP process may have run out of memory. Parameters are: VRF Name, Address-family, Event

Recommended Action If BGP ran out of memory, add memory to the router or change the network configuration to decrease memory requirements. Clear any BGP peers that may have been shut down automatically. If BGP has memory available, there was an internal error, restart BGP.

Error Message BGP-3-BRIB_RDDEL: [%s] Couldn't delete rdinfo %s from BRIB

Explanation BGP was unable to remove from BGP RIB. The BGP process may have run out of memory. Parameters are: Address-family, RDinfo

Recommended Action If BGP ran out of memory, add memory to the router or change the network configuration to decrease memory requirements. Clear any BGP peers that may have been shut down automatically. If BGP has memory available, there was an internal error, restart BGP.

Error Message BGP-3-BRIBADD: [%s] Couldn't add %s to BRIB (key length %d, error %d)

Explanation BGP was unable to add a prefix to the BGP RIB. The BGP process may have run out of memory. Parameters are: Address-family, Prefix, Key length, Error code

Recommended Action If BGP ran out of memory, add memory to the router or change the network configuration to decrease memory requirements. Clear any BGP peers that may have been shut down automatically. If BGP has memory available, there was an internal error, restart BGP.

Error Message BGP-3-BRIBDEL: [%s] Error %u deleting %s from BRIB

Explanation An unexpected but handleable event has occured. Parameters are: Address-family, Error, Prefix/masklength

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-CLISET: Unable to set %s inheritance for %s

Explanation An internal software error occured. Parameters are: Template type, Peer address

Recommended Action Restart component.

Error Message BGP-3-COMADD: Error occurred in community addition, no action taken

Explanation An internal error was encountered in adding a community.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-COMLEN: Community sets exceeded maximum allowed limit

Explanation An internal limit was hit in adding a community.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-CONDSRV_CLEANUP: Conditional Service cleanup request failed, %s

Explanation Sysmgr rejected BGP's request to shut down.

Recommended Action No special action is required.

Error Message BGP-3-CONFCHECK: confcheck API %s() failed with error: %s(0x%08x).\n

Explanation confcheck API has failed.

Recommended Action Keep running, do nothing special.

Error Message BGP-3-DAMPCFG: Both policy and global dampconf exist

Explanation An internal software error occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-DEBUG_FD_ERROR: Unable to open debug file %s, errno: %d

Explanation Debug messages may not be collected due to system error.

Recommended Action Keep running, do nothing special.

Error Message BGP-3-DEBUG_FD_WRITE_ERROR: Unable to write to debug file, fd: %d, errno: %d, nread: %d, nwritten: %d

Explanation Debug messages may not be collected due to system error.

Recommended Action Keep running, do nothing special.

Error Message BGP-3-DEBUG_PIPE_ERROR: Unable to open debug pipes, errno: %d

Explanation Debug messages may not be collected due to system error.

Recommended Action Keep running, do nothing special.

Error Message BGP-3-DEBUG_PIPE_READ_ERROR: Unable to read from debug pipe, fd: %d, errno: %d

Explanation Debug messages may not be collected due to system error.

Recommended Action Keep running, do nothing special.

Error Message BGP-3-DEBUG_PIPE_WRITE_ERROR: Unable to write to debug pipe, fd: %d(%d), errno: %d, nwritten: %d

Explanation Debug messages may not be collected due to system error.

Recommended Action Keep running, do nothing special.

Error Message BGP-3-DUPLICATE_INTERFACE_PEER: The interface peer %s that was learned over %s is also seen on %s

Explanation Session could not be brought up because duplicate peer address is not supported.

Recommended Action Configure unique link local addresses on remote side.

Error Message BGP-3-EAD_ES_CFG_CREATE: [%s] Couldn't create EAD_ES_Node for ESI %s to

Explanation BGP was unable to create an EVPN instance.The BGP process may have run out of memory. Parameters are: Address-family, EAD ES

Recommended Action If BGP ran out of memory, add memory to the router or change the network configuration to decrease memory requirements. Clear any BGP peers that may have been shut down automatically. If BGP has memory available, there was an internal error, restart BGP.

Error Message BGP-3-EAD_ES_SEG_CREATE: [%s] Couldn't create EAD_ES_Seg for ESI %s to

Explanation BGP was unable to create an EVPN instance.The BGP process may have run out of memory. Parameters are: Address-family, EAD ES

Recommended Action If BGP ran out of memory, add memory to the router or change the network configuration to decrease memory requirements. Clear any BGP peers that may have been shut down automatically. If BGP has memory available, there was an internal error, restart BGP.

Error Message BGP-3-EBGPTTL: Unable to set EBGP TTL for peer %s, fd %d

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-EPE_MAX_ACTIVE_PEER_SET: Peer-set %s exceeds maximum of %d established peers

Explanation EPE peer-set has more active peers than can be used for MPLS forwarding.

Recommended Action Keep running, do nothing special.

Error Message BGP-3-EVENT_WAIT: Error while waiting for %s event, error - %s\n

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-EXTCOMADD: Error occurred in extended community addition, no action taken

Explanation An internal error was encountered in adding an extended community.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-FEATURE_STATUS: FM status for feature %s failed with error: %s(0x%08x).\n

Explanation FM get feature status failed.

Recommended Action Keep running, do nothing special.

Error Message BGP-3-FINDAGGR: [%s] Did not find aggregate path for entry %s/%d

Explanation BGP was unable to find an internal datastructure for originating a configured aggregate.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-ILLARGS: %s called with illegal arguments

Explanation An internal software error occured. Parameters are: Function

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-IMPORT_VRF_EXCEED: Maximum limit on number of import VRFs exceeded

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-INTERNAL_INFO: %s %u

Explanation Printing Internal Information.

Recommended Action No special action is required.

Error Message BGP-3-INTERNAL: Internal error %d: %s

Explanation An internal software error occured. Parameters are: Error Type, Error

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-INVHDR: Peer %s sent unexpected header pattern

Explanation The marker pattern in message header was invalid.

Recommended Action Check that the peering router is configured correctly. Clear the peer if necessary after any change.

Error Message BGP-3-IPTABLES_CHAIN_REMOVE: Unable to remove iptables chain for vrf %s

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-IPTABLES_CHAIN: Unable to create iptables chain for vrf %s

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-IPTABLES: Unable to configure iptables rule for neighbor %s

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-IPTOS: Unable to set IP TOS bits for %s, fd %d

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-LIST: %s

Explanation An internal software error occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-LISTEN_SOCK: Failed to listen on %s BGP TCP port

Explanation BGP_EXPL_SOCK_ERROR. Parameters are: Address-family

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-LOWMEM: Low on heap memory

Explanation The system may be low on memory.

Recommended Action Out of memory. Add more memory to the router.

Error Message BGP-3-MD5PASS: Cannot set MD5 password for peer %s

Explanation An internal software error occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-MISSING_ROUTERID: Router ID is removed. RD is deleted since RD is generated by router ID automatically

Explanation Router id is removed while auto rd is still configured.

Recommended Action ACTION_BGP_KEEP_RUNNING.

Error Message BGP-3-MQLOOP_SHUTDOWN: Couldn't shut down %s message queue loop

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-MTSDROP: MTS drop failed on %s queue: %s

Explanation An unexpected but handleable event has occured. Parameters are: Queue name, Error

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-MTSRECV: MTS receive failed on %s queue: %s

Explanation An unexpected but handleable event has occured. Parameters are: Queue name, Error

Recommended Action Keep running, do nothing special.

Error Message BGP-3-MTSSEND: MTS send() error to SAP %d, opcode %d: %s

Explanation An unexpected but handleable event has occured. Parameters are: MTS SAP, MTS Opcode, Error

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-NBRERR: %s Peer error: %s

Explanation An internal software error occured. Parameters are: Peer address, Error

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-NEGWRITE: Negative nr of %d bytes left to write to peer %s

Explanation An internal software error occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-NETWKRNHSETUP: Couldn't setup rnh notifications for network %s, error: %s

Explanation Could not setup RNH for network prefix. Parameters are: Network prefix, Error

Recommended Action If BGP ran out of memory, add memory to the router or change the network configuration to decrease memory requirements. Clear any BGP peers that may have been shut down automatically. If BGP has memory available, there was an internal error, restart BGP.

Error Message BGP-3-NEXTHOPADD: [%s] Couldn't add next-hop to RNHDB for %s/%d, error %d

Explanation The router was unable to store a BGP next hop in an internal database, perhaps because it ran out of memory. Parameters are: Address-family, Prefix/masklength, Error

Recommended Action If BGP ran out of memory, add memory to the router or change the network configuration to decrease memory requirements. Clear any BGP peers that may have been shut down automatically. If BGP has memory available, there was an internal error, restart BGP.

Error Message BGP-3-NEXTHOPDEL: [%s] Couldn't delete next-hop from RNHDB for %s/%d, error %d

Explanation An unexpected but handleable event has occured. Parameters are: Address-family, Prefix/masklength, Error

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-NOBUF: [%s] Unable to get buffer for %s msg to peer %s

Explanation An internal software error occured. Parameters are: Address-family, Msg Type, Peer address

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-NOMEMORY: Could not allocate %s

Explanation The system may be low on memory. Parameters are: Data Type

Recommended Action Out of memory. Add more memory to the router.

Error Message BGP-3-PATH_DEL: Failed to destroy path (%s), error %d

Explanation The BGP process may have run out of memory. Parameters are: Path Type, Error

Recommended Action If BGP ran out of memory, add memory to the router or change the network configuration to decrease memory requirements. Clear any BGP peers that may have been shut down automatically. If BGP has memory available, there was an internal error, restart BGP.

Error Message BGP-3-PATH_STALE: [%s] %s path being %s, for %s from peer %s, should not be stale

Explanation An internal software error occured. Parameters are: Address-family, Path State, Operation, Prefix/masklength, Peer address

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-PEER: Peer %s, failed %s

Explanation An internal software error occured. Parameters are: Peer address, Operation

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-PFX_NOMEM: Could not allocate %s for %s/%d

Explanation The system may be low on memory. Parameters are: Data Type, Prefix/masklength

Recommended Action Out of memory. Add more memory to the router.

Error Message BGP-3-PLCYOUT: Cannot add reference to policy out info for route-map %s

Explanation Restart component.

Recommended Action 

Error Message BGP-3-PLCYRNHATTACH: Couldn't attach to policy RNH info for policy %s, error: %s

Explanation An internal error occurred in using a policy.

Recommended Action If BGP ran out of memory, add memory to the router or change the network configuration to decrease memory requirements. Clear any BGP peers that may have been shut down automatically. If BGP has memory available, there was an internal error, restart BGP.

Error Message BGP-3-PLCYRNHDETACH: Couldn't detach from policy RNH info for policy %s, error: %s

Explanation An internal software error occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-PLCYRNHSETUP: Couldn't setup rnh notifications for policy %s, error: %s

Explanation An internal error occurred in using a policy.

Recommended Action If BGP ran out of memory, add memory to the router or change the network configuration to decrease memory requirements. Clear any BGP peers that may have been shut down automatically. If BGP has memory available, there was an internal error, restart BGP.

Error Message BGP-3-RDINFO: VRF %s, %s, table %s: rdinfo %s failed

Explanation BGP was unable to initialize an internal datastructure. The BGP process may have run out of memory. Parameters are: VRF name, Address-family, Table name, Operation

Recommended Action If BGP ran out of memory, add memory to the router or change the network configuration to decrease memory requirements. Clear any BGP peers that may have been shut down automatically. If BGP has memory available, there was an internal error, restart BGP.

Error Message BGP-3-RESTARTINIT: Unable to determine restart status and initialize

Explanation An unrecoverable error has occured during BGP initialization.

Recommended Action Restart component.

Error Message BGP-3-RESTARTTYPE: Error in learning restart type

Explanation An internal software error occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-RNHCB: RNH %s error: %s

Explanation An internal software error occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-RPC_SET_ID_OP: Failed to %s RPC SET ID

Explanation BGP was unable to allocate or free an index for a BGP NEXTHOP RPC SET ID block. Parameters are: Allocate or free

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-RPM_L3VPN_EXTCOMM: L3vpn extcommunity failure during %s

Explanation An unexpected but handleable event has occured. Parameters are: Type of operation

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-RPMBIND: RPM policy bind failed for %s %s

Explanation An unexpected but handleable event has occured. Parameters are: Policy type, Policy name

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-RPMHANDLE: RPM notification handle does not match existing handle for policy %s

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-RT_DB_ADD: Couldn't add route target %s into the database

Explanation The router could not add route-target in its internal database. Parameters are: Route-target

Recommended Action ACTION_BGP_REPORT_CS.

Error Message BGP-3-SENDBUF: Error manipulating sendbuf: %s

Explanation An internal software error occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-SIDMGRINITAPI: Unable to INITIALIZE with SID Manager, error: %d

Explanation Error calling SID Init API.

Recommended Action Keep running, do nothing special.

Error Message BGP-3-SIDMGRREG: Unable to register with SID Manager, error: %d

Explanation Error calling SID Manager register API.

Recommended Action Keep running, do nothing special.

Error Message BGP-3-SNMP_API_DATA: Message data is NULL

Explanation SNMP message does not have memory to store data.

Recommended Action Keep running, do nothing special.

Error Message BGP-3-SOCK_ACCEPT: Socket (%d/%d) accept: %s\n

Explanation BGP_EXPL_SOCK_ERROR. Parameters are: Socket fds, Error

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-SOCK_ERR: Socket (%d/%d): %s\n

Explanation BGP_EXPL_SOCK_ERROR. Parameters are: Socket fds, Error

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-SOCK_FDPOP: Unexpected error during socket fd population %s(%d)

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-SOCK_RECV: Unexpected error during socket data recv %s(%d)

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-SOCKBIND: Cannot bind local socket for peer %s: %s

Explanation An error occured during a socket operation. Parameters are: Peer address, Error

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-SOCKCREATE: Cannot create socket for peer %s: %s, stats: %lu/%lu/%lu/%lu/%lu

Explanation An error occured during a socket operation. Parameters are: Peer address, Error, Socket stats

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-SOCKMAXSEG: Could not set maxseg %d on listen fd %d

Explanation An error occured during a socket operation.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-SOCKNONBLOCK: Couldn't make fd %d non-blocking: %s

Explanation An error occured during a socket operation. Parameters are: Socket fd, Error

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-SOCKOPEN: TCP connection for peer %s already open, fd %d, state %s

Explanation An internal software error occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-SOFTINCAP: Peer %s not capable of soft refresh in, operator intervention needed: %s

Explanation The router is unable to do soft refresh for the indicated peer.

Recommended Action If necessary, reset the connection with the peer.

Error Message BGP-3-SRAND: Failed to set random seed

Explanation An unrecoverable error has occured during BGP initialization.

Recommended Action Restart component.

Error Message BGP-3-SUPSTATE: Error in learning SUP state

Explanation An internal software error occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-TBLATTRAVL_OP: Failed table attribute database operation: %s, id %lu

Explanation BGP was unable to perform a table attribute database operation. Parameters are: Operation, Attr ID

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-TBLAVL_OP: Failed table database operation: %s, table %s id %#lx

Explanation BGP was unable to perform a table database operation.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-TBLCTX_INIT: VRF %s, %s, table %s: Table initialization failed

Explanation BGP was unable to initialize an internal datastructure. The BGP process may have run out of memory. Parameters are: VRF name, Address-family, Table name

Recommended Action If BGP ran out of memory, add memory to the router or change the network configuration to decrease memory requirements. Clear any BGP peers that may have been shut down automatically. If BGP has memory available, there was an internal error, restart BGP.

Error Message BGP-3-THREAD_SHUTDOWN: Problem shutting down thread %s: Operation - %s, Error - %s\n

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-TIMER_START: Couldn't start %s timer %s

Explanation An internal software error occured. Parameters are: Timer Type, Data

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-U6RIBRNH: U6RIB RNH error: %s

Explanation An internal software error occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-ULIBREG: Unable to register with ULIB

Explanation An unrecoverable error has occured during BGP initialization.

Recommended Action Restart component.

Error Message BGP-3-ULIBRNH: ULIB RNH error: %s

Explanation An internal software error occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-UNEXPECT: %s L%d: %s

Explanation An internal software error occured. Parameters are: File Name, Line Number, Unexpected condition

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-UNEXPPATHATTR: [%s] Unexpected attr (%p) path chain for %s

Explanation An unexpected but handleable event has occured. Parameters are: Address-family, Prefix/masklength

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-URIB_API: URIB API %s() failed\n

Explanation URIB API had failed.

Recommended Action Keep running, do nothing special.

Error Message BGP-3-URIB_RT_MODIFY_WITH_RC: URIB route modify operation failed during %s %d

Explanation An internal software error occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-URIB_RT_MODIFY: URIB route modify operation failed during %s

Explanation An internal software error occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-URIBRNH: URIB RNH error: %s

Explanation An internal software error occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-URIBRT: URIB RT error: %s

Explanation An internal software error occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-VRF_CTX: VRF %s, failed %s

Explanation An internal software error occured. Parameters are: VRF Name, Operation

Recommended Action Report the issue to Customer Support.

Error Message BGP-3-VRFAVL_OP: Failed vrf database operation: %s, vrf %s id %lu

Explanation BGP was unable to perform a vrf database operation.

Recommended Action Report the issue to Customer Support.

BGP-4

Error Message BGP-4-AFIMPORT: %s prefixes imported from %s to %s has reached the limit %d

Explanation . Parameters are: Address family, Vrf, Max-prefix-limit check result

Recommended Action No special action is required.

Error Message BGP-4-APIMTSNOMSG: No MTS payload found on %s queue, opc %d

Explanation An unexpected but handleable event has occured. Parameters are: Queue name, MTS Opcode

Recommended Action Report the issue to Customer Support.

Error Message BGP-4-CFG_ADVERTISEPIP_ADD: Command 'advertise-pip' has been configured: please, ensure that 'advertise virtual-rmac' under interface NVE is also configured for proper VxLAN over IPv4 underlay operation.

Explanation Advertise-pip and advertise virtual-rmac must be in sync. Parameters are: Configuration state

Recommended Action No special action is required.

Error Message BGP-4-CFG_ADVERTISEPIP_DEL: Command 'advertise-pip' has been removed: please, ensure that 'advertise virtual-rmac' under interface NVE is also removed for proper VxLAN over IPv4 underlay operation.

Explanation Advertise-pip and advertise virtual-rmac must be in sync. Parameters are: Configuration state

Recommended Action No special action is required.

Error Message BGP-4-CFG_ADVERTISEPIP_ORDER: Command 'advertise-pip' has been configured: please remove advertise-pip and configure 'advertise virtual-rmac' under interface NVE first.

Explanation Advertise-pip and advertise virtual-rmac must be in special order. Parameters are: Configuration state

Recommended Action No special action is required.

Error Message BGP-4-CFG_REWRITE_RT_ASN: When soft-reconfig is enabled, enabling/disabling 'rewrite-rt-asn' may not take effect until after 'restart bgp' is issued

Explanation rewrite-rt-asn requires a restart BGP when soft-reconfig is configured. Parameters are: Configuration state

Recommended Action No special action is required.

Error Message BGP-4-EPE_NONDEFAULT_VRF: Command egress-engineering cannot be configured for peer %s in a non-default VRF

Explanation Template egress-engineering not applied to peer in non-default VRF.

Recommended Action Keep running, do nothing special.

Error Message BGP-4-ERR_HANDLING_REASON: Enhanced Error processing: %s [%d] Action: %s from peer %s

Explanation which attribute trigger the enhanced error processing. Parameters are: Reason,length, Action: discard or treat-as-withdraw, peer address

Recommended Action Keep running, do nothing special.

Error Message BGP-4-ERR_TREAT_AS_WITHDRAW: Treating advertised routes as withdraw from peer %s af [%s] %s/%ld %s

Explanation Advertised routes are taken as withdraw because of a route filter match or an attribute is malformed. Parameters are: Peer address, Address Family, prefix, mask, path-id

Recommended Action Keep running, do nothing special.

Error Message BGP-4-EVPN_MANUAL_CONFIG_DELETE: EVPN mode has been removed. All L2 VNIs will have their manual overriding configurations deleted and their RD and RTs defaulted to the auto values

Explanation EVPN defaults to auto when vni is UP in NVE.

Recommended Action No special action is required.

Error Message BGP-4-EXIT_DECONFIG: BGP process exiting due to deconfiguration

Explanation The indicated BGP process has been deconfigured.

Recommended Action No special action is required.

Error Message BGP-4-EXIT_RESTART: BGP process exiting due to manual restart

Explanation The indicated BGP process is being restarted.

Recommended Action No special action is required.

Error Message BGP-4-EXIT_UNKNOWN: BGP process exiting due to unknown reason

Explanation .

Recommended Action No special action is required.

Error Message BGP-4-EXTCOMLEN: Extended communities exceeded the max limit of %u

Explanation An internal limit was hit in adding an extended community.

Recommended Action Report the issue to Customer Support.

Error Message BGP-4-INVALIDIOD: Received interface(%s) %s notification from IM with zero iod

Explanation BGP received an IF notification from IM with zero or invalid iod. Parameters are: Interface name, Type of notification

Recommended Action No special action is required.

Error Message BGP-4-ISSU_CHECK: Not ready for ISSU: Graceful Restart or hold time check failed

Explanation Keep running, do nothing special.

Recommended Action 

Error Message BGP-4-ISSU_HOLDTIME: ISSU will be affected if hold time is less than or equal to system switchover time (%d seconds)\n

Explanation Keep running, do nothing special.

Recommended Action 

Error Message BGP-4-LDP_CONV_TIMER_EXP: [%s] Bestpath timer expired before LDP got converged vrf: %s

Explanation Bestpath timer expired before LDP got converged after SSO. Parameters are: Address-family,vrf

Recommended Action No special action is required.

Error Message BGP-4-MAXPEERS: Trying to configure more than %d neighbors

Explanation Keep running, do nothing special.

Recommended Action 

Error Message BGP-4-MQUNEXPECT: Recieved unexpected message (%d/%d) on %s queue

Explanation An unexpected but handleable event has occured.

Recommended Action Report the issue to Customer Support.

Error Message BGP-4-MTSNOMSG: No MTS payload found on %s queue, opc %d

Explanation An unexpected but handleable event has occured. Parameters are: Queue name, MTS Opcode

Recommended Action Report the issue to Customer Support.

Error Message BGP-4-MTSUNKOPC: Recieved unknown MTS message on %s queue, opc %d

Explanation An unexpected but handleable event has occured. Parameters are: Queue name, MTS Opcode

Recommended Action Report the issue to Customer Support.

Error Message BGP-4-NGMVPN_UNKNOWN_ROUTE_TYPE: Unknown %s route type %d received from peer %s %s, ignoring it

Explanation Unsupported route type received.

Recommended Action Keep running, do nothing special.

Error Message BGP-4-NODAMPMEM: [%s] Unable to dampen prefix %s from peer %s due to no memory

Explanation BGP_EXPL_NO_MEMORY. Parameters are: Address-family, Prefix/masklength, Peer address

Recommended Action Keep running, do nothing special.

Error Message BGP-4-NORID: Peer %s sent us 0.0.0.0 as its router-id

Explanation A BGP peer sent us an invalid router id.

Recommended Action Check that the peering router is configured correctly. Clear the peer if necessary after any change.

Error Message BGP-4-PATH_ATTR_FILTER_MATCH: discarding attribute %d length %d for peer %s due to matching filter

Explanation peer is impacted because of the match in path-attribute filter. Parameters are: attrid, attrlen, Peer address

Recommended Action Keep running, do nothing special.

Error Message BGP-4-PATH_ATTR_FILTER: path attribute filter has changed for peer %s. %s

Explanation peer is impacted because of the update in path-attribute filter. Parameters are: Peer address, Warning

Recommended Action Keep running, do nothing special.

Error Message BGP-4-PFXEXCEED: [%s] No. of prefix received from %s exceeded configured limit %d

Explanation A peer sent us more routes than BGP was configured to accept. Parameters are: Address-family, Peer, Prefix limit

Recommended Action Check that the peering router is configured correctly. Clear the peer if necessary after any change.

Error Message BGP-4-PFXWARN: [%s] Number of prefixes received from %s reached %d, maximum %d

Explanation The number of routes sent to us by a peer exceeded the threshold at which BGP should generate a warning. Parameters are: Address-family, Peer, Warning limit, Max limit

Recommended Action Check that the peering router is configured correctly. Clear the peer if necessary after any change.

Error Message BGP-4-PREFIX_MAX_PATHS_EXCEEDED: [%s] Prefix %s with %d paths has exceeded the maximum number of supported %d paths

Explanation An abnormal number of paths in a prefix may degrade BGP's performance. Parameters are: Address-family, dest, paths, limit

Recommended Action No special action is required.

Error Message BGP-4-RLIMIT: Error while setting rlimit, error - %s\n

Explanation An unexpected but handleable event has occured.

Recommended Action Keep running, do nothing special.

Error Message BGP-4-SAMERID: Peer %s uses same routerid as us

Explanation A BGP peer is using the same router id as this router.

Recommended Action Configure either the local or remote router with a different router ID.

Error Message BGP-4-SELF_RESTART: BGP self-restarting due to %s%s%s

Explanation BGP process is performing a self-restart. Parameters are: Self restart reason, reason detail, more detail

Recommended Action No special action is required.

Error Message BGP-4-SLAB_HOLD: Not able to hold element from %s slab

Explanation . Parameters are: Memory slab name

Recommended Action Keep running, do nothing special.

Error Message BGP-4-SNMP_DEREGFAIL: Failed to deregister MIB with the SNMP agent (%s).\n

Explanation Keep running, do nothing special.

Recommended Action 

Error Message BGP-4-SNMP_REGFAIL: Failed to register MIB with the SNMP agent, the BGP MIB will be unavailable. (%s)\n

Explanation Keep running, do nothing special.

Recommended Action 

Error Message BGP-4-SR_DUPE_LABEL: Prefixes %s/%d in table %d and %s/%d in table %d have the same label index

Explanation Two unique prefixes should not have the same label index.

Recommended Action Keep running, do nothing special.

Error Message BGP-4-TXLIST: %s

Explanation An unexpected but handleable event has occured. Parameters are: Error message related to txlist

Recommended Action Report the issue to Customer Support.

BGP-5

Error Message BGP-5-ADJCHANGE: neighbor %s %s %s

Explanation A BGP session has just been established. Or a session has just been shutdown. Parameters are: Neighbor address, Up or Down, Reason

Recommended Action No special action is required.

Error Message BGP-5-BADSIG: Should not have received signal %d

Explanation An unexpected but handleable event has occured.

Recommended Action Keep running, do nothing special.

Error Message BGP-5-MAXMSGLIMIT: [%s] Failed to send update message with prefix %s for peer %s because the msg size(%u) exceeded the maximum limit(%u)

Explanation BGP Update message reached the maximum limit. Parameters are: Address-family, Prefix, Peer, Update Message Length, Update Max Message Length

Recommended Action Keep running, do nothing special.

Error Message BGP-5-MEMALERT: BGP memory status changed from %s to %s

Explanation . Parameters are: Current memory status

Recommended Action No special action is required.

Error Message BGP-5-NO_RD: VRF %s : RD deconfigured

Explanation RD deconfigured from VRF. Parameters are: VRF Name

Recommended Action No special action is required.

Error Message BGP-5-SHUTDOWN: BGP process %s administratively %s

Explanation BGP protocol was administratively up/shutdown.

Recommended Action No special action is required.

BGP-6

Error Message BGP-6-AS4AGG_INVALID: Received AS4_AGGREGATOR with invalid length %d in it from peer %s

Explanation The peer has sent AS4_AGGREGATOR with invalid attr length which would be discarded.

Recommended Action No special action is required.

Error Message BGP-6-AS4PATH_CONFED: Received AS4_PATH with CONFED related path segments in it from peer %s

Explanation The peer has sent AS4_PATH with confed based path segments which would be discarded.

Recommended Action No special action is required.

Error Message BGP-6-AS4PATH_SEGLEN: Received AS4_PATH with zero path segment length in it from peer %s

Explanation The peer has sent AS4_PATH with zero path segment length which would be discarded.

Recommended Action No special action is required.

Error Message BGP-6-AS4PATH_SEGTYPE: Received AS4_PATH with invalid path segment type in it from peer %s

Explanation The peer has sent AS4_PATH with invalid path segment type which would be discarded.

Recommended Action No special action is required.

Error Message BGP-6-BADASPATH: Long AS path %s received from peer %s: more than configured maxas-limit %d

Explanation The peer sent an AS path exceeding the maxas-limit.

Recommended Action Check that the peering router is configured correctly. Clear the peer if necessary after any change.

Error Message BGP-6-EVPN_STATIC_REMOTE_MAC: Static/learnt remote MAC address conflict for %s in VNI %lu

Explanation 

Recommended Action 

Error Message BGP-6-MAXPEER_LIMIT: Reached maximum-peer limit on the prefix peer %s, ignoring connection request from %s

Explanation Session can be brought up due to maximum-peer limit.

Recommended Action No special action is required.

Error Message BGP-6-MEMSTAT: Hit low memory condition - Free: %u MB, Min free: %u MB

Explanation . Parameters are: Current System free memory, Minimum System free memory

Recommended Action No special action is required.

Error Message BGP-6-PATH_MAXASLIMIT: [%s] Path for %s from peer %s found to %s the maxas-limit

Explanation . Parameters are: Address family, PrefixMasklength, EBGP Peer that sent the route, Maxas-limit check result

Recommended Action No special action is required.

Error Message BGP-6-SRTE_ERROR: SRTE ERROR: %s

Explanation Error calling SRTE API.

Recommended Action Keep running, do nothing special.

Error Message BGP-6-START: BGP process %s startup, reason: %s

Explanation The indicated BGP process has started. Parameters are: Process name, Reason

Recommended Action No special action is required.

Error Message BGP-6-ULIBUPDATE: [%s] Couldn't update label to ULIB for prefix %s

Explanation No BGP update to ULIB because of same labels. Parameters are: Address-family, Prefix/masklength

Recommended Action No special action is required.

BGP-7

Error Message BGP-7-OBJSTORE: Objstore API %s() failed with error: %d\n

Explanation Objstore API has failed.

Recommended Action Keep running, do nothing special.

ECP

This section contains the ECP messages.

ECP-2

Error Message ECP-2-API_FAILED: API %s failed with error %s(0x%08x) in %s

Explanation Failures during API call. Error is printed in the message.

Recommended Action No special action is required.

Error Message ECP-2-PTHREAD: %s failed with error - %d in %s()

Explanation ECP invoked an API which failed. This is an unexpected but manageable event. Parameters are: Failed Function, Error Code, ECP Function

Recommended Action Keep running, do nothing special.

ECP-3

Error Message ECP-3-INFRA_SYSERR: %s failed with error - %s (0x%08x) - in %s()

Explanation ECP called an infra API which returned an error. Parameters are: Failed Function, Error, Error Code, ECP Function

Recommended Action Report the issue to Customer Support.

Error Message ECP-3-INITERR: %s failed

Explanation Initialization failures conditions.

Recommended Action No special action is required.

Error Message ECP-3-MALLOC_FAILED: Memory allocation failed for %s structure in %s

Explanation ECP could not allocate memory for a structure.

Recommended Action No special action is required.

Error Message ECP-3-MTS_DROP: Error returned from mts_drop(), errno: %s (0x%08x) in %s()

Explanation An MTS API returned an error when ECP tried to drop a message. Parameters are: Error, Error Code, ECP Function

Recommended Action Keep running, do nothing special.

Error Message ECP-3-MTS_RECV: Error returned from tsp_mts_recv(), errno: %s (0x%08x) in %s()

Explanation An MTS API returned an error while ECP was receiving on an MTS queue. Parameters are: Error, Error Code, ECP Function

Recommended Action Keep running, do nothing special.

Error Message ECP-3-MTS_SEND: Error returned from mts_send(), errno: %s (0x%08x) in %s()

Explanation An MTS API returned an error while ECP was sending an MTS message. Parameters are: Error, Error Code, ECP Function

Recommended Action Keep running, do nothing special.

Error Message ECP-3-REGERR: Failed to register with component %s, Failed in %s.

Explanation Could not register with another component.IPC Failures such as shared memory access.

Recommended Action No special action is required.

ECP-6

Error Message ECP-6-INFORM: %s

Explanation Informational message.

Recommended Action No special action is required.

Error Message ECP-6-MTS_UNKNOWN_MSG: Received unknown MTS message with opcode %d, dropping it in %s()

Explanation ECP received an unknown message. The message is dropped. Parameters are: MTS Opcode, ECP Function

Recommended Action Keep running, do nothing special.

EIGRP

This section contains the EIGRP messages.

EIGRP-2

Error Message EIGRP-2-ALLOC_URIB_ADD: eigrp_smalloc() failed for URIB add-route buffer

Explanation Failed to allocate URIB add-route buffer.

Recommended Action Configure the network or router to decrease the number of routes, or add additional memory to the router.

Error Message EIGRP-2-ALLOC_URIB_DEL: eigrp_smalloc() failed for URIB delete-route buffer

Explanation Failed to allocate URIB delete-route buffer.

Recommended Action Configure the network or router to decrease the number of routes, or add additional memory to the router.

Error Message EIGRP-2-API_INIT: Couldn't initialize %s API

Explanation EIGRP failed to open API to interact with the component. Parameters are: API name

Recommended Action Kill component and don't restart it.

Error Message EIGRP-2-BFD_API_FAIL: bfd_send_remove_sessions

Explanation Failed to send bfd remove sessions.

Recommended Action No special action is required.

Error Message EIGRP-2-BFD_CREATE_SESSION_FAILED: BFD Session create failed.

Explanation Failed to create BFD session.

Recommended Action No special action is required.

Error Message EIGRP-2-CIB_CREATE_FAIL: eigrp_create_cib failed for context %s

Explanation Failed to create specified context. Parameters are: Context name

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-2-CLEANUP_DREG: Failed to deregister with %s during eigrp_cleanup()

Explanation Failed to deregister with specified service during process shutdown. Parameters are: Service name

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-2-CLI_INIT_FAILED: cli_init() failed in eigrp_init_cli()

Explanation EIGRP could not register with the CLI server process.

Recommended Action Kill component and don't restart it.

Error Message EIGRP-2-ERR_FREEBUF: Illegal memory free in function %s

Explanation Illegal memory free detected. Parameters are: Function

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-2-ERR_URIB_TID: Can't determine context from URIB table id %d

Explanation Failed to determine context from URIB table id. Parameters are: Table id

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-2-ILL_FUNCCALL: Illegal call to function %s

Explanation Illegal call to specified function. Parameters are: Function

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-2-ILL_POLICY_TYPE: Illegal policy type in %s()

Explanation Illegal policy type in specified rpm callback. Parameters are: Function

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-2-ILL_WORKTYPE: Illegal work type %d ipigrp2_process_workq()

Explanation Worker thread received illegal work type. Parameters are: Work type

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-2-ILLEGAL_TIMER_ID: Illegal timer-id used in mgd_timer_init_leaf(), timer-id: %d

Explanation Illegal timer id was specified. Parameters are: Managed timer id

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-2-IM_GET_NAME_FAILED: im_get_if_name failed for iod (%u) with error (%d)

Explanation EIGRP could not get if_name from Interface Manager.

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-2-IM_REG_FAILED: im_register_client() failed in eigrp_init_im()

Explanation EIGRP could not register with the IM process.

Recommended Action Kill component and don't restart it.

Error Message EIGRP-2-INIT: %s failed

Explanation EIGRP process initialization failed. Parameters are: Init function

Recommended Action Kill component and don't restart it.

Error Message EIGRP-2-IP_MCAST_JOIN_FAILED: Unable to join ip mcast group for interface: %s. Please unconfigure and configure it again.

Explanation EIGRP could not join mcast group for the interface. Parameters are: Interface

Recommended Action ACTION_OPERATOR_RETRY.

Error Message EIGRP-2-IP_REG_FAILED: ip_register() failed in eigrp_init_ip()

Explanation EIGRP could not register with the IP process.

Recommended Action Kill component and don't restart it.

Error Message EIGRP-2-L3VM_SOO_NOTIF: l3vm_get_if_soo_info failed for interface %s

Explanation EIGRP could not get SoO from L3VM for.

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-2-MGD_TIMER_CREATE_FAIL: Failed to create managed timer %d

Explanation Failed to create specified managed timer. Parameters are: Managed timer id

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-2-MTS_BIND: mts_bind() failed in binding %s mts_q, error %s

Explanation Failed in binding to specified mts queue with error. Parameters are: MTS queue name, Error string

Recommended Action Kill component and don't restart it.

Error Message EIGRP-2-MTS_REQ_FM_STATUS: Failed in mts_register of MTS_OPC_FM_SRV_FEATURE_STATUS

Explanation Failed to request feature status notification.

Recommended Action Kill component and don't restart it.

Error Message EIGRP-2-MTSBIND: Unable to bind to MTS SAP for %s, sap %d: %s

Explanation EIGRP was not able to create a message queue for communication. Parameters are: Queue name, MTS SAP, Error

Recommended Action Restart component.

Error Message EIGRP-2-NO_MEMORY: Can't allocate memory in function %s

Explanation Can't allocate memory in specified function. Parameters are: Function

Recommended Action Out of memory. Add more memory to the router.

Error Message EIGRP-2-NO_SET_PRIORITY: Failed to set policy or priority

Explanation EIGRP process could not set itself process priority, exiting.

Recommended Action Kill component and don't restart it.

Error Message EIGRP-2-PROCINFO_CREATE_FAIL: eigrp_procinfo creation failed

Explanation Failed to create procinfo.

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-2-PTHREAD_FAILED: %s failed in %s for thread %s

Explanation EIGRP process failed to create a task thread. Parameters are: Pthread operation, Function, Thread name

Recommended Action Kill component and don't restart it.

Error Message EIGRP-2-REG_L3VM: Failed to register with l3vm

Explanation Failed to register with the l3vm process.

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-2-REG_OPCODE: Could not register opcode 0x%x, reason %s

Explanation Could not register mts opcode with reason. Parameters are: Opcode, Reason

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-2-RLIMIT_FAILED: Couldn't set data segment size to %u

Explanation EIGRP process could not set its memory resource limit, exiting. Parameters are: Data segment size

Recommended Action Kill component and don't restart it.

Error Message EIGRP-2-RPM_L3VPN_API: RPM_L3VPN_API failed : %s

Explanation EIGRP call tp RPM L3VPN API failed.

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-2-SBCR_INIT: Could not initialize shared database client, rc=0x%x [%s]

Explanation Failed to initialize shared database client with return error code. Parameters are: Error code, Error string

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-2-TIMER_CREATE_FAIL: Failed to create %s active timer

Explanation Failed to create specified active timer. Parameters are: Active timer name

Recommended Action Kill component and don't restart it.

Error Message EIGRP-2-TIMER_SET_INIT: Couldn't init %s active timer set

Explanation EIGRP failed to initialize timer resource. Parameters are: Timer set name

Recommended Action Kill component and don't restart it.

Error Message EIGRP-2-URIB_ACK_ERROR: URIB ack not processed: %s

Explanation EIGRP could not find the xid for URIB ack.

Recommended Action No special action is required.

Error Message EIGRP-2-URIB_ADD_ROUTE: urib_add_route() failed

Explanation Failed to add routes to URIB.

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-2-URIB_DEREGISTER: Could not deregister with the URIB in %s

Explanation EIGRP could not deregister with URIB in specified function. Parameters are: Function

Recommended Action Kill component and don't restart it.

Error Message EIGRP-2-URIB_REDIST_LIMIT_WARNING: Redistribute threshold limit reached: %d%%.

Explanation EIGRP has reached the configured redistribute maximum-prefix threshold. Parameters are: Threshold

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-2-URIB_REGISTER: EIGRP could not register with the URIB

Explanation At initialization time, EIGRP could not register with the URIB process.

Recommended Action Kill component and don't restart it.

Error Message EIGRP-2-URIB_RT_MOD_INIT: URIB_RT_MOD_INIT failed

Explanation EIGRP call tp URIB_RT_MOD_INIT API failed.

Recommended Action Kill component and don't restart it.

Error Message EIGRP-2-URIB_SEND_BUFFER: urib_rt_mod_send() failed

Explanation Failed to send add/delete buffer to URIB.The RIB and topology table might be inconsistent.Try restarting EIGRP to clear the issue.

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-2-VERIFY_PTAG: Could not verify process tag with sysmgr

Explanation Could not verify process tag with sysmgr.

Recommended Action Kill component and don't restart it.

EIGRP-3

Error Message EIGRP-3-ANCHORCOUNT_DUAL: Anchor count negative

Explanation A software or hardware error occurred.

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-3-BADCOUNT_DUAL: Route %s, %d successors, %d rdbs

Explanation A software or hardware error occurred. Parameters are: Route, Number of feasible successors, Number of successors

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-3-BFD_SEND_AUTO_EXPIRY: Unable to start BFD staling, error %s

Explanation EIGRP BFD staling API failed. Parameters are: Error string

Recommended Action Dump core, then restart component.

Error Message EIGRP-3-BUFFER_OVERFLOW: Buffer overflow: %s

Explanation Buffer overflow while writing EIGRP community.

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-3-CMI_NO_VRF_ERR: CMI error: No %s VRF information found

Explanation CMI returned an error. Parameters are: Error

Recommended Action Keep running, do nothing special.

Error Message EIGRP-3-DUP_ADDR: Duplicate address %s detected on interface %s

Explanation The same IP address was configured on two EIGRP routers on the same subnet. Parameters are: IP address, Interface

Recommended Action ACTION_EIGRP_DUP_ADDR.

Error Message EIGRP-3-FEATURE_STATUS: %s status error: 0x%08x\n

Explanation FM get feature status failed.

Recommended Action Keep running, do nothing special.

Error Message EIGRP-3-GR_OFF_DURING_UPG: Attempt to upgrade system with graceful-restart off.

Explanation Attempt to upgrade system with graceful-restart off.

Recommended Action ACTION_EIGRP_ENABLE_GR.

Error Message EIGRP-3-INTERNAL_DUAL: %s %d: Internal Error

Explanation EIGRP internal DUAL finite state error. Parameters are: DUAL descriptor block name, Autonomous system number

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-3-MTS_DROP: Error returned from mts_drop(), errno: %s

Explanation EIGRP called a MTS API which returned an error. Parameters are: Error string

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-3-MTS_RECV: Error returned from mts_recv(), errno: %s

Explanation EIGRP called a MTS API which returned an error. Parameters are: Error string

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-3-MTS_REGISTER: mts_register failed for EIGRP: %s

Explanation EIGRP was unable to register an MTS notification.

Recommended Action No special action is required.

Error Message EIGRP-3-MTSDROP: MTS drop failed on %s queue: %s

Explanation EIGRP_EXPL_UNEXPECTED_EVENT. Parameters are: Queue name, Error

Recommended Action Report the issue to Customer Support.

Error Message EIGRP-3-MTSRECV: MTS receive failed on %s queue: %s

Explanation EIGRP_EXPL_UNEXPECTED_EVENT. Parameters are: Queue name, Error

Recommended Action Keep running, do nothing special.

Error Message EIGRP-3-MTSSEND: MTS send() error to SAP %d, opcode %d: %s

Explanation EIGRP_EXPL_UNEXPECTED_EVENT. Parameters are: MTS SAP, MTS Opcode, Error

Recommended Action Report the issue to Customer Support.

Error Message EIGRP-3-MULTIFLOW_DUAL: Flow control error, %s, on %s

Explanation A software or hardware error occurred. Parameters are: Error description, Interface

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-3-NOHANDLE_DUAL: Handle %d is not allocated in pool.

Explanation A software or hardware error occurred. Parameters are: Peer handle

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-3-PEERSEXIST_DUAL: %d peers exist on IIDB %s

Explanation A software or hardware error occurred. Parameters are: Peer count, Interface

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-3-PFXLIMIT_DUAL: %s %d %s prefix limit exceeded

Explanation Prefix limit threshold exceeded. Parameters are: DUAL descriptor block name, Autonomous system number, Prefix type

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-3-PFXLIMITTHR_DUAL: %s %d %s reached prefix limit threshold

Explanation Prefix limit threshold reached. Parameters are: DUAL descriptor block name, Autonomous system number, Prefix type

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-3-PROBESEQ_DUAL: Bad probe sequence %d from %s, expecting %d

Explanation A software or hardware error occurred. Parameters are: Probe seq no received, Peer, Expected seq no

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-3-RDBLEFT_DUAL: dest %s, nexthop %s (%s), origin %s

Explanation A software or hardware error occurred. Parameters are: Route, Next hop, IntefaceOrigin

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-3-REFCOUNT_DUAL: Negative refcount in pakdesc %x

Explanation A software or hardware error occurred. Parameters are: Packet descriptor

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-3-RPM_REDIST_INIT: Couldn't initialize redistribution API for %s

Explanation EIGRP failed to open API to interact with the component. Parameters are: Redistributed client

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-3-SIA_DUAL: Route %s stuck-in-active state in %s %d. Cleaning up

Explanation EIGRP route stuck-in-active, cleanup happened. Parameters are: Route, DUAL descriptor block name, Autonomous system number

Recommended Action No special action is required.

Error Message EIGRP-3-SYSMGR_DISPATCH: Error returned from sysmgr_dispatch(), errno: %s

Explanation EIGRP called a System Manager API which returned an error. Parameters are: Error string

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-3-SYSMGR_QUERY: Sysmgr state query failed for uuid %d, tag %s

Explanation A software or hardware error occurred. Parameters are: Service UUID, Process Tag

Recommended Action ACTION_EIGRP_SEND_LOG.

Error Message EIGRP-3-UNKNOWN_MTYPE: Unknown mtype: %d/%d in %s

Explanation EIGRP process received unknown Interprocess message, dropped. Parameters are: Message major type, Message minor type, Function

Recommended Action No special action is required.

Error Message EIGRP-3-UNKTIMER_DUAL: Unknown timer type %d expiration

Explanation A software or hardware error occurred. Parameters are: Managed timer id

Recommended Action ACTION_EIGRP_SEND_LOG.

EIGRP-4

Error Message EIGRP-4-MQUNEXPECT: Recieved unexpected message (%d/%d) on %s queue

Explanation EIGRP_EXPL_UNEXPECTED_EVENT.

Recommended Action Report the issue to Customer Support.

Error Message EIGRP-4-MTSNOMSG: No MTS payload found on %s queue, opc %d

Explanation EIGRP_EXPL_UNEXPECTED_EVENT. Parameters are: Queue name, MTS Opcode

Recommended Action Report the issue to Customer Support.

Error Message EIGRP-4-MTSUNKOPC: Received unknown MTS message on %s queue, opc %d

Explanation EIGRP_EXPL_UNEXPECTED_EVENT. Parameters are: Queue name, MTS Opcode

Recommended Action Report the issue to Customer Support.

Error Message EIGRP-4-PICOSEC_WARN: ip delay eigrp command accepted but did not take effect in 32 bit version mode

Explanation The command was issued when in 32bit metric version mode.

Recommended Action No special action is required.

EIGRP-5

Error Message EIGRP-5-EVENT_DUAL: %s, %s

Explanation DUAL event log message. Parameters are: DUAL descriptor block name, Log message

Recommended Action No special action is required.

Error Message EIGRP-5-HA_INFO: EIGRP HA info msg - %s

Explanation EIGRP received a HA info msg. Parameters are: Message

Recommended Action No special action is required.

Error Message EIGRP-5-NBRCHANGE_DUAL: %s %d: Neighbor %s (%s) is %s: %s

Explanation A neighbor went up or down. Parameters are: DUAL descriptor block name, Autonomous system number, Peer, Interface, State, Reason

Recommended Action No special action is required.

Error Message EIGRP-5-SHUTDOWN: Shutting down EIGRP process - %s

Explanation EIGRP received a shutdown request. Parameters are: Reason

Recommended Action No special action is required.

EIGRP-6

Error Message EIGRP-6-UNEQUAL_METRICS: EIGRP: Unequal metric (%s), delay [%llu/%llu], bandwidth [%llu/%llu] , mtu [%u/%u], hopcount [%u/%u], reliability [%u/%u], load [%u/%u]

Explanation Unequal metrics detected and log-neighbor-warnings is enabled. Parameters are: Route, Delay1, Delay2, Bandwidth1, Bandwidth2, Mtu1, Mtu2, Hopcount1, Hopcount2, Reliability1Reliability2, Load1, Load2

Recommended Action ACTION_EIGRP_SEND_LOG.

FTM

This section contains the FTM messages.

FTM-3

Error Message FTM-3-ERR_CFGFAILED: %s

Explanation Configuration Error.

Recommended Action Report the issue to Customer Support.

Error Message FTM-3-ERR_HWNOMEM: %s

Explanation H/W Mem Allocation Err.

Recommended Action Report the issue to Customer Support.

Error Message FTM-3-ERR_HWWRITE: %s

Explanation H/W Write Error.

Recommended Action Report the issue to Customer Support.

Error Message FTM-3-ERR_INTERNAL: %s

Explanation Internal Error.

Recommended Action Report the issue to Customer Support.

Error Message FTM-3-ERR_IPCFAILED: %s

Explanation IPC failure.

Recommended Action Keep running, do nothing special.

Error Message FTM-3-ERR_NOACTION: %s

Explanation Internal Data structure error.

Recommended Action Keep running, do nothing special.

Error Message FTM-3-ERR_SWNOMEM: %s

Explanation S/W Mem Error.

Recommended Action Report the issue to Customer Support.

Error Message FTM-3-WARN_INTERNAL: %s

Explanation Internal Warning.

Recommended Action Keep running, do nothing special.

HEAP

This section contains the HEAP messages.

Error Message HEAP-3-HEAP_ERROR: %s

Explanation Heap routing library error.

Recommended Action No special action is required.

HEAP-4

Error Message HEAP-4-HEAP_WARNING: %s

Explanation Heap malloc warning.

Recommended Action No special action is required.

HMM

This section contains the HMM messages.

HMM-2

Error Message HMM-2-API_FAILED_ERR: API %s failed with %s(0x%x) in %s

Explanation Failures during API call. Error is printed in the message.

Recommended Action No special action is required.

Error Message HMM-2-API_FAILED: API %s failed in %s

Explanation Failures during API call. Error is printed in the message.

Recommended Action No special action is required.

Error Message HMM-2-DUP_HOSTS: (%s) [%s] Detected a potential duplicate host %s

Explanation Informing that a potential duplicate host has been detected. Parameters are: VRF, Address-Family, Prefix

Recommended Action Keep running, do nothing special.

Error Message HMM-2-IM_API_FAILED: API %s failed for 0x%x with err: 0x%x in %s

Explanation Failures during API call. Error is printed in the message.

Recommended Action No special action is required.

Error Message HMM-2-LIB_MALLOC_FAILED: malloc() failed for allocating %s in %s()

Explanation HMM API library is out of heap memory. Parameters are: Data, HMM Function

Recommended Action Reload the stack.

Error Message HMM-2-PTHREAD: %s failed with error - %d in %s()

Explanation HMM invoked an API which failed. This is an unexpected but manageable event. Parameters are: Failed Function, Error Code, HMM Function

Recommended Action Keep running, do nothing special.

HMM-3

Error Message HMM-3-AUTO_CONF_PROFILE_ERROR: %s

Explanation Failure to apply profile.

Recommended Action Report the issue to Customer Support.

Error Message HMM-3-AUTO_CONF_REFRESH_ERROR: %s

Explanation Failure to refresh profile.

Recommended Action Report the issue to Customer Support.

Error Message HMM-3-EVENT_WAIT: Error while waiting for %s event, error - %s\n

Explanation Failure during waiting for an event.

Recommended Action Report the issue to Customer Support.

Error Message HMM-3-INFRA_SYSERR: %s failed with error - %s (0x%08x) - in %s()

Explanation HMM called an infra API which returned an error. Parameters are: Failed Function, Error, Error Code, HMM Function

Recommended Action Report the issue to Customer Support.

Error Message HMM-3-INITERR: %s init failed

Explanation Initialization failures conditions.

Recommended Action No special action is required.

Error Message HMM-3-LIB_API_FAILED: %s - failed in %s()

Explanation HMM invoked an API which failed. This is an unexpected but manageable event. Parameters are: Failed API, HMM Function

Recommended Action Keep running, do nothing special.

Error Message HMM-3-LIB_INT_ERROR: %s in %s()

Explanation HMM API encountered an error during internal processing. Parameters are: Error, HMM Function

Recommended Action Report the issue to Customer Support.

Error Message HMM-3-LIB_MTS_SEND: Error returned from mts_send(), errno: %s in %s()

Explanation An MTS API returned an error while HMM was sending an MTS message. Parameters are: Error, HMM Function

Recommended Action Keep running, do nothing special.

Error Message HMM-3-MALLOC_FAILED: Memory allocation failed for %s structure in %s

Explanation HMM could not allocate memory for a structure.

Recommended Action No special action is required.

Error Message HMM-3-MTS_DROP: Error returned from mts_drop(), errno: %s (0x%08x) in %s()

Explanation An MTS API returned an error when HMM tried to drop a message. Parameters are: Error, Error Code, HMM Function

Recommended Action Keep running, do nothing special.

Error Message HMM-3-MTS_RECV: Error returned from tsp_mts_recv(), errno: %s (0x%08x) in %s()

Explanation An MTS API returned an error while HMM was receiving on an MTS queue. Parameters are: Error, Error Code, HMM Function

Recommended Action Keep running, do nothing special.

Error Message HMM-3-MTS_SEND: Error returned from mts_send(), errno: %s (0x%08x) in %s()

Explanation An MTS API returned an error while HMM was sending an MTS message. Parameters are: Error, Error Code, HMM Function

Recommended Action Keep running, do nothing special.

Error Message HMM-3-PTADD_ERR: PT Add failed for %s in %s

Explanation PT Add api failed in HMM.

Recommended Action Report the issue to Customer Support.

Error Message HMM-3-PTDEL_ERR: PT Delete failed for %s in %s

Explanation PT Delete api failed in HMM.

Recommended Action Report the issue to Customer Support.

Error Message HMM-3-RAVL_INSERT: Ravl insert failed in %s

Explanation Ravl insert api failed in HMM.

Recommended Action Report the issue to Customer Support.

Error Message HMM-3-REGERR: Failed to register with component %s, Failed in %s.

Explanation Could not register with another component.IPC Failures such as shared memory access.

Recommended Action No special action is required.

Error Message HMM-3-SDBREAD: SDB read operation failed for type %d in %s

Explanation An internal software error occured.

Recommended Action Report the issue to Customer Support.

Error Message HMM-3-UNEXPECT: %s L%d: %s

Explanation An internal software error occured. Parameters are: File Name, Line Number, Unexpected condition

Recommended Action Report the issue to Customer Support.

Error Message HMM-3-URIB_RT_MODIFY: URIB route modify operation failed during %s

Explanation An internal software error occured.

Recommended Action Report the issue to Customer Support.

Error Message HMM-3-XVLAN_ERR: Auto configuring xlated vlan mapping failed with error - %s in %s

Explanation Request for xlated vlan mapping failed during auto-config.

Recommended Action No special action is required.

HMM-4

Error Message HMM-4-AUTO_CONF_PROFILE_WARNING: %s

Explanation Auto-configuration warning.

Recommended Action Report the issue to Customer Support.

Error Message HMM-4-AUTO_CONF_WARNING: %s\n

Explanation Auto-configuration related warnings.

Recommended Action Keep running, do nothing special.

Error Message HMM-4-MTS_NOMSG: No MTS payload found on %s queue, opc %d

Explanation HMM invoked an API which failed. This is an unexpected but manageable event. Parameters are: Queue name, MTS Opcode

Recommended Action Report the issue to Customer Support.

Error Message HMM-4-TXLIST: %s

Explanation HMM invoked an API which failed. This is an unexpected but manageable event. Parameters are: Error message related to txlist

Recommended Action Report the issue to Customer Support.

HMM-5

Error Message HMM-5-CONV_LIMIT_REACHED: (%s) [%s] Hit Conversational-Learning %s %s threshold for remote host %s, action %s (%s)

Explanation Informing that conversational-learning threshold has been reached. Parameters are: VRF, Address-Family, Type, Value, Prefix, Action, Where

Recommended Action Keep running, do nothing special.

Error Message HMM-5-MAC_BD_MAX_LIMIT: (%s) [%s] Hosts sharing MAC %s(%s) has exceeded max limit %u, dropping new hosts

Explanation Hosts sharing same MAC in a Vlan within the VRF reached Max limit. Parameters are: VRF, Address-Family, MAC, Vlan, Max Limit

Recommended Action Keep running, do nothing special.

HMM-6

Error Message HMM-6-AUTO_CONF_PROFILE_APPLIED: %s

Explanation Auto-configuration profile successfully applied.

Recommended Action No special action is required.

Error Message HMM-6-AUTO_CONF_PROFILE_DOWNLOADED: %s

Explanation Auto-configuration profile successfully downloaded from remote server.

Recommended Action No special action is required.

Error Message HMM-6-AUTO_CONF_PROFILE_REFRESH: %s

Explanation Auto-configuration profile successfully refreshed.

Recommended Action No special action is required.

Error Message HMM-6-AUTO_CONF_PROFILE_UNAPPLIED: %s

Explanation Auto-configuration profile successfully removed from host.

Recommended Action No special action is required.

Error Message HMM-6-FEATURE_STATUS: FM status for feature %s failed with error: %s(0x%08x).\n

Explanation FM get feature status failed.

Recommended Action Keep running, do nothing special.

Error Message HMM-6-INFORM: %s

Explanation Informational message.

Recommended Action No special action is required.

Error Message HMM-6-MTS_UNKNOWN_MSG: Received unknown MTS message with opcode %d, dropping it in %s()

Explanation HMM received an unknown message. The message is dropped. Parameters are: MTS Opcode, HMM Function

Recommended Action Keep running, do nothing special.

HMM-7

Error Message HMM-7-LIB_MTS_SEND_DEBUG: Debug: Error returned from mts_send(), errno: %s in minor function %s()

Explanation Debug: An MTS API returned an error while HMM was sending an MTS message. Parameters are: Error, HMM Function

Recommended Action Keep running, do nothing special.

Error Message HMM-7-MTS_SEND_DEBUG: Debug: Error returned from mts_send(), errno: %s (0x%08x) in minor function %s()

Explanation Debug: An MTS API returned an error while HMM was sending an MTS message. Parameters are: Error, Error Code, HMM Function

Recommended Action Keep running, do nothing special.

ICMPv6

This section contains the ICMPv6 messages.

ICMPv6-2

Error Message ICMPv6-2-MALLOC_FAILED: malloc() failed for allocating %s in %s()

Explanation ICMPv6 process is out of heap memory. This could be due to temporary increase in the number of static or dynamic Neighbor Cache Entries(NCEs) to a very high value.

Recommended Action Keep running, do nothing special.

ICMPv6-3

Error Message ICMPv6-3-ADJ_ADD: Failed to add adjacency for received packet from %s on %s

Explanation Due to this failure, packet forwarding to this address will be affected until the next successful retrial.

Recommended Action No special action is required.

Error Message ICMPv6-3-API_FAILED: %s failed in %s()

Explanation An unexpected but manageable event has occurred.).

Recommended Action No special action is required.

Error Message ICMPv6-3-API_INIT_FAILED: %s failed in %s() with rc=0x%x, %s

Explanation An unexpected but manageable event has occurred.).

Recommended Action No special action is required.

Error Message ICMPv6-3-API_INTERFACE_FAILED: %s failed for %s in %s()

Explanation An unexpected but manageable event has occurred.).

Recommended Action No special action is required.

Error Message ICMPv6-3-BAD_INFO_RECEIVED: Invalid %s message type %d received in %s()

Explanation An unexpected but manageable event has occurred.).

Recommended Action No special action is required.

Error Message ICMPv6-3-BITFIELD_FAILED: %s failed in %s

Explanation ICMPV6 process could not execute the bitfield operation. Parameters are: Bitfield operation, Function name

Recommended Action Dump core, then reload the stack.

Error Message ICMPv6-3-COUNT_MISMATCH: Mismatch between calculated and received adjacencies: Calculated:%d and Received:%d

Explanation UNEXPECTED_ERROR_EXPLANATION.

Recommended Action Keep running, do nothing special.

Error Message ICMPv6-3-CV_INIT: Couldn't init cond var %s

Explanation ICMPV6 process failed to initialize conditional-variable resource. Parameters are: Thread Name

Recommended Action Dump core, then restart component.

Error Message ICMPv6-3-FHRP_CTXT: Adding virtual ipv6 address for %s: non-ipv6 enabled interface %s in context %d

Explanation UNEXPECTED_ERROR_EXPLANATION.

Recommended Action No special action is required.

Error Message ICMPv6-3-GROUP_PREFIX_IGNORE: Too many Groups in Group Prefix %s. Specify the prefix within /120

Explanation GPrefix yields too many Groups. Parameters are: Group Prefix

Recommended Action No special action is required.

Error Message ICMPv6-3-GROUP_RANGE_IGNORE: Too many Groups in Group Range %s - %s

Explanation Group Range yields too many Groups. Parameters are: Start Group, End Group

Recommended Action No special action is required.

Error Message ICMPv6-3-IF_INDEX: Invalid interface index received from %d

Explanation UNEXPECTED_ERROR_EXPLANATION.

Recommended Action Keep running, do nothing special.

Error Message ICMPv6-3-MBUF_OP_FAILED: %s for size %d failed in %s()

Explanation An unexpected but manageable event has occurred.).

Recommended Action No special action is required.

Error Message ICMPv6-3-MQ_FAILED_NAME: %s failed for client %s, errno: %s in %s()

Explanation An unexpected but manageable event has occurred.).

Recommended Action No special action is required.

Error Message ICMPv6-3-MQ_FAILED_PID: %s failed to client pid: %d, errno: %s in %s()

Explanation An unexpected but manageable event has occurred.).

Recommended Action No special action is required.

Error Message ICMPv6-3-MQ_FAILED: %s failed, errno: %s in %s()

Explanation An unexpected but manageable event has occurred.).

Recommended Action No special action is required.

Error Message ICMPv6-3-MSG_TO_TLV: TLV Conversion failed (%d)

Explanation TLV conversion failed.

Recommended Action Report the issue to Customer Support.

Error Message ICMPv6-3-MTS_DROP: Error returned from mts_drop(), errno: %s

Explanation ICMPv6 called a MTS API which returned an error.

Recommended Action Dump core, then restart component.

Error Message ICMPv6-3-MTS_FAILED_NAME: %s failed for client %s, errno: %s in %s()

Explanation An unexpected but manageable event has occurred.).

Recommended Action No special action is required.

Error Message ICMPv6-3-MTS_FAILED_PID: %s failed to client pid: %d, errno: %s in %s()

Explanation An unexpected but manageable event has occurred.).

Recommended Action No special action is required.

Error Message ICMPv6-3-MTS_FAILED: %s failed, errno: %s in %s()

Explanation An unexpected but manageable event has occurred.).

Recommended Action No special action is required.

Error Message ICMPv6-3-MTS_RECV: Error returned from mts_recv(), errno: %s

Explanation ICMPv6 called a MTS API which returned an error.

Recommended Action Dump core, then restart component.

Error Message ICMPv6-3-MUTEX_INIT: Couldn't init mutex %s

Explanation ICMPV6 process failed to initialize mutex system resource. Parameters are: Thread Name

Recommended Action Dump core, then restart component.

Error Message ICMPv6-3-ND_LOG: %s

Explanation Neighbor Discovery process found erroneous configuration on the network.

Recommended Action No special action is required.

Error Message ICMPv6-3-ND_RA_LOG: %s

Explanation Network configuration information obtained from Neighbor Discovery - Router Acknowledgement(RA) packet.

Recommended Action No special action is required.

Error Message ICMPv6-3-PACKET_LENGTH_ERROR: ICMPv6 packet from %s is smaller than payload length of %d bytes:%s()

Explanation An unexpected but manageable event has occurred.).

Recommended Action No special action is required.

Error Message ICMPv6-3-PT_ADD: Couldn't add element to PT %s

Explanation ICMPv6 failed to update the local database entry. Parameters are: Patricia tree name

Recommended Action No special action is required.

Error Message ICMPv6-3-PT_DEL: Couldn't delete element from PT %s

Explanation ICMPv6 failed to delete the local database entry. Parameters are: Patricia tree name

Recommended Action No special action is required.

Error Message ICMPv6-3-RESERVE_LIMIT: Exceeded reserve-limit for interface %s - dropping

Explanation Exceeded 80 percent of the reserve-limit for interface. Parameters are: Interface

Recommended Action No special action is required.

Error Message ICMPv6-3-STATE_LIMIT: Exceeded state-limit for interface %s - dropping

Explanation Exceeded 80 percent of the state-limit for interface. Parameters are: Interface

Recommended Action No special action is required.

Error Message ICMPv6-3-SYSMGR_DISPATCH: Error returned from sysmgr_dispatch(), errno: %s

Explanation ICMPv6 called a System Manager API which returned an error.

Recommended Action Dump core, then restart component.

Error Message ICMPv6-3-TIMER_FAILED: %s failed for %s in %s

Explanation 

Recommended Action 

Error Message ICMPv6-3-TLV_TO_STRUCT: TLV to Struct Conversion failed (%d)

Explanation TLV to Struct conversion failed.

Recommended Action Report the issue to Customer Support.

Error Message ICMPv6-3-TXLIST_CREATE: Couldn't create txlist for %s

Explanation ICMPV6 failed to create txlist resource. Parameters are: Data type

Recommended Action Dump core, then restart component.

Error Message ICMPv6-3-VRF_CREATE: ICMPv6 VRF creation failed for vrf %s

Explanation ICMPv6 process could not create the VRF context. Parameters are: VRF name

Recommended Action Dump core, then reload the stack.

ICMPv6-4

Error Message ICMPv6-4-M6RIB_SM_ADDR: M6RIB shared memory not valid for mtype:%d, xid:%d, count:%d

Explanation M6RIB shared memory being accesses is not valid.

Recommended Action No special action is required.

Error Message ICMPv6-4-MTS_QUEUE_NOT_INITIALIZED: %s mts queue not intialized

Explanation ICMPV6_UNEXPECTED_EXPLANATION.

Recommended Action No special action is required.

Error Message ICMPv6-4-RATE_LIMIT_WARNING: icmpv6 rate limit exceeded in %s

Explanation num of ipc msgs sent to icmpv6 are rate limited. Parameters are: Function name

Recommended Action No special action is required.

ICMPv6-6

Error Message ICMPv6-6-RESERVE_LIMIT_WARNING: Exceeded 80 percent of the reserve-limit for interface %s

Explanation Exceeded 80 percent of the reserve-limit for interface. Parameters are: Interface

Recommended Action No special action is required.

Error Message ICMPv6-6-STATE_LIMIT_WARNING: Exceeded 80 percent of the state-limit for interface %s

Explanation Exceeded 80 percent of the state-limit for interface. Parameters are: Interface

Recommended Action No special action is required.

Error Message ICMPv6-6-UNKNOWN_OPC: Received unknown mts opcode %d

Explanation ICMPv6 process received unknown Interprocess message, dropped.

Recommended Action No special action is required.

ICMPv6-7

Error Message ICMPv6-7-IPV6_PACKET_SEND_FAILED: %s failed in %s()

Explanation An unexpected but manageable event has occurred.).

Recommended Action No special action is required.

IGMP

This section contains the IGMP messages.

IGMP-2

Error Message IGMP-2-STARTUP_DEBUG: %s %d

Explanation An unrecoverable software error has occurred during. Parameters are: Failure reason

Recommended Action No special action is required.

Error Message IGMP-2-STARTUP_FAILURE: Startup failure: %s

Explanation An unrecoverable software error has occurred during. Parameters are: Failure reason

Recommended Action No special action is required.

Error Message IGMP-2-TABLE_ALMOST_FULL: _IGMP_ %s entry table is %d%% full.

Explanation The _IGMP_ entry table is threshold%% full. Parameters are: Snoop, Threshold Percentage

Recommended Action No special action is required.

Error Message IGMP-2-TABLE_LESS_THAN_ALMOST_FULL: _IGMP_ %s entry table is now less than %d%% full.

Explanation The _IGMP_ entry table is now less than threshold%% full. Parameters are: Snoop, Threshold Percentage

Recommended Action No special action is required.

IGMP-3

Error Message IGMP-3-ALREADY_RUNNING:

Explanation Another _IGMP_ process is already running, this process will shutdown.

Recommended Action No special action is required.

Error Message IGMP-3-API_FAILED: %s failed in %s

Explanation _IGMP_ process failed in invoking an API. Parameters are: API name, Function name

Recommended Action No special action is required.

Error Message IGMP-3-AVL_ERROR: AVL-tree operation %s failed for %s

Explanation _IGMP_ process failed in an AVL-tree manipulation. Parameters are: AVL tree operation, Tree name

Recommended Action No special action is required.

Error Message IGMP-3-BAD_MSG: Invalid %s message received from %s

Explanation _IGMP_ received an invalid MTS message. Parameters are: Message type, Process name

Recommended Action Dump core, then restart component.

Error Message IGMP-3-BF_CREATE: Couldn't create bitfield for %s

Explanation _IGMP_ failed to create bitfield resource. Parameters are: Data type

Recommended Action Dump core, then restart component.

Error Message IGMP-3-BITFIELD_FAILED: %s failed in %s

Explanation _IGMP_ process could not execute the bitfield operation. Parameters are: Bitfield operation, Function name

Recommended Action Dump core, then reload the stack.

Error Message IGMP-3-CV_INIT: Couldn't init cond var %s

Explanation _IGMP_ process failed to initialize conditional-variable resource. Parameters are: Thread Name

Recommended Action Dump core, then restart component.

Error Message IGMP-3-ENCAP_DEL: Couldn't delete encap entry for %d (*, %s) (%s) due to %s from snooping database

Explanation _IGMP_ failed to delete the snooping-db encap entry. Parameters are: Encap, Group address, Vlan-id, Failure reason

Recommended Action No special action is required.

Error Message IGMP-3-FEX_MRD_ERROR: Router behind FEX port %s is not supported by the hardware

Explanation _IGMP_ snooping could not process PIM hellofrom the fex port since it is not supported. Parameters are: Interface

Recommended Action No special action is required.

Error Message IGMP-3-FEX_QUERY_ERROR: Router behind FEX port %s is not supported by the hardware

Explanation _IGMP_ snooping could not process queryfrom the fex port since it is not supported. Parameters are: Interface

Recommended Action No special action is required.

Error Message IGMP-3-GET_MAC_ADDR: %s failed in %s with error %s

Explanation _IGMP_ process failed in getting mac addr. Parameters are: API name, Function name, Error String

Recommended Action No special action is required.

Error Message IGMP-3-GETRLIMIT_FAILED: Address Space size retrieval failed, reason %s

Explanation _IGMP_ process could not retrieve memory resource limit.

Recommended Action No special action is required.

Error Message IGMP-3-GLOBAL_STATUS: Global status update failed, value is %d

Explanation _IGMP_ called an API which returned an error. Parameters are: Global Status

Recommended Action 

Error Message IGMP-3-GROUP_DEL: Couldn't delete group entry for %s (%s) due to %s from snooping database

Explanation _IGMP_ failed to delete the snooping-db group entry. Parameters are: Group address, Vlan-id, Failure reason

Recommended Action No special action is required.

Error Message IGMP-3-GROUP_LIMIT: Exceeded multicast group limit (%d), ignoring new reports

Explanation Exceeded the multicast group limit. Parameters are: Group Limit

Recommended Action No special action is required.

Error Message IGMP-3-GROUP_LOW_THRESH: Multicast group count below %d, group joins re-enabled

Explanation Multicast group count below threshold. Parameters are: Group Threshold

Recommended Action No special action is required.

Error Message IGMP-3-GROUP_PREFIX_IGNORE: Too many Groups in Group Prefix %s. Specify the prefix within /24

Explanation GPrefix yiels too many Groups. Parameters are: Group Prefix

Recommended Action No special action is required.

Error Message IGMP-3-GROUP_RANGE_IGNORE: Too many Groups in Group Range %s - %s

Explanation Group Range yields too many Groups. Parameters are: Start Group, End Group

Recommended Action No special action is required.

Error Message IGMP-3-HA_DB_REBUILD: HA run-time database buildup %s

Explanation _IGMP_ -SNOOP stateful restart status. Parameters are: State description

Recommended Action No special action is required.

Error Message IGMP-3-HA_GLOBAL: HA %s operation on _IGMP_ snooping global database failed

Explanation _IGMP_ -SNOOP called an PSS API which returned an error. Parameters are: Operation type

Recommended Action 

Error Message IGMP-3-HA_GROUP: HA %s operation in vlan %d failed for (%s, %s)

Explanation _IGMP_ -SNOOP called an PSS API which returned an error. Parameters are: Operation type, Vlan-id, Group, Source

Recommended Action 

Error Message IGMP-3-HA_OIF: HA %s operation on OIF %s for (%s, %s) in vlan %d failed

Explanation _IGMP_ -SNOOP called an PSS API which returned an error. Parameters are: Operation type, Interface, Group, Source, Vlan-id

Recommended Action 

Error Message IGMP-3-HA_RPORT: HA %s operation on router-port %s for vlan %d failed

Explanation _IGMP_ -SNOOP called an PSS API which returned an error. Parameters are: Operation type, Interface, Vlan-id

Recommended Action 

Error Message IGMP-3-HA_VLAN: HA %s operation for vlan %d failed

Explanation _IGMP_ -SNOOP called an PSS API which returned an error. Parameters are: Operation type, Vlan-id

Recommended Action 

Error Message IGMP-3-IGMP_INIT:

Explanation _IGMP_ process initialization failed. Parameters are: Failure reason

Recommended Action Dump core, then restart component.

Error Message IGMP-3-IM_API_FAILED: %s failed in %s

Explanation IM API failed in MCEC _IGMP_ Snoop. Parameters are: API name, Function name

Recommended Action No special action is required.

Error Message IGMP-3-INVALID_OIF_LIST:

Explanation _IGMP_ -SNOOP has invalid number of iods. Parameters are: OIF list, OIF count, Function name

Recommended Action 

Error Message IGMP-3-LIB_API_FAILED: %s failed in %s

Explanation Process failed in invoking _IGMP_ API. Parameters are: API name, Function name

Recommended Action No special action is required.

Error Message IGMP-3-LIB_MTS_FAILED: %s failed in %s, errno: %s

Explanation Process failed to access the _IGMP_ MTS-queue. Parameters are: MTS IPC operation, Function name, Error ID

Recommended Action No special action is required.

Error Message IGMP-3-LVPORT_CREATE:

Explanation _IGMP_ -SNOOP called an API which returned an error. Parameters are: Vlan ID, Group address

Recommended Action 

Error Message IGMP-3-MALLOC_FAILED: Malloc failed in %s (%d) size:%d

Explanation _IGMP_ process is out of free memory. Parameters are: Structure type, Function name

Recommended Action Configure the network or router to decrease the number of routes.

Error Message IGMP-3-MFDM_NO_BUF: Cannot find MFDM buffer from route-ack for xid 0x%x

Explanation _IGMP_ process could not find a route buffer in it's queue from the MFDM message, ignored.

Recommended Action No special action is required.

Error Message IGMP-3-MTS_BIND: Error returned from mts_bind() for %s mts-q, errno: %s

Explanation _IGMP_ called a MTS API which returned an error. Parameters are: MTS Queue name, Error description

Recommended Action Dump core, then restart component.

Error Message IGMP-3-MTS_DROP: Error returned from mts_drop() for %s queue, errno: %s

Explanation _IGMP_ called a MTS API which returned an error. Parameters are: MTS Queue name, Error description

Recommended Action Dump core, then restart component.

Error Message IGMP-3-MTS_INIT: Error returned from mts_callback_handler_set() for %s queue, errno: %s

Explanation _IGMP_ called a MTS API which returned an error. Parameters are: MTS Queue name, Error description

Recommended Action Dump core, then restart component.

Error Message IGMP-3-MTS_RECV: Error returned from mts_recv() for %s queue, errno: %s

Explanation _IGMP_ called a MTS API which returned an error. Parameters are: MTS Queue name, Error description

Recommended Action Dump core, then restart component.

Error Message IGMP-3-MTS_SEND: Error returned from mts_send() for %s queue, errno: %s

Explanation _IGMP_ called a MTS API which returned an error. Parameters are: MTS Queue name, Error description

Recommended Action Dump core, then restart component.

Error Message IGMP-3-MUTEX_INIT: Couldn't init mutex %s

Explanation _IGMP_ process failed to initialize mutex system resource. Parameters are: Thread Name

Recommended Action Dump core, then restart component.

Error Message IGMP-3-NO_SET_PRIORITY: Failed to set policy or priority

Explanation _IGMP_ process could not set itself process priority, exiting.

Recommended Action No special action is required.

Error Message IGMP-3-NO_SHUTDOWN: Unable to shutdown %s

Explanation _IGMP_ process unable to shut itself down. Parameters are: Shutdown error information

Recommended Action Dump core, then restart component.

Error Message IGMP-3-PT_ADD: Couldn't add element to PT %s

Explanation _IGMP_ failed to update the local snooping-db entry. Parameters are: Patricia tree name

Recommended Action No special action is required.

Error Message IGMP-3-PT_DEL: Couldn't delete element from PT %s

Explanation _IGMP_ failed to delete the local snooping-db entry. Parameters are: Patricia tree name

Recommended Action No special action is required.

Error Message IGMP-3-PTHREAD_FAILED: %s failed in %s for thread %s

Explanation _IGMP_ process failed to create a task thread. Parameters are: Pthread operation, Function name, Thread name

Recommended Action Dump core, then restart component.

Error Message IGMP-3-PULLUP_FAILED: m_pullup() of %d bytes failed in %s

Explanation _IGMP_ process failed to process the packet, dropping it. Parameters are: Byte count, Function name

Recommended Action No special action is required.

Error Message IGMP-3-QUERIER_START_FAILED: %s failed in %s

Explanation _IGMP_ snoop failed to start the querier. Parameters are: Function name, Function name

Recommended Action No special action is required.

Error Message IGMP-3-RCOUNT_DELETE: Route count delete failed for %s

Explanation _IGMP_ called an API which returned an error. Parameters are: Interface

Recommended Action 

Error Message IGMP-3-RCOUNT_UPDATE: Route count update failed for %s

Explanation _IGMP_ called an API which returned an error. Parameters are: Interface

Recommended Action 

Error Message IGMP-3-RESERVE_LIMIT: Exceeded reserve-limit for interface %s - dropping

Explanation Exceeded the reserve-limit for interface. Parameters are: Interface

Recommended Action No special action is required.

Error Message IGMP-3-RESTART_REASON:

Explanation _IGMP_ is restoring the routes it had added in previous instance. Parameters are: Restart reason

Recommended Action No special action is required.

Error Message IGMP-3-RPORT_UPDATE: Router-port update failed for %s (%s)

Explanation _IGMP_ -SNOOP called an API which returned an error. Parameters are: Interface, Vlan ID

Recommended Action 

Error Message IGMP-3-SETRLIMIT_FAILED: Address space size increment of %d failed, reason %s

Explanation _IGMP_ process could not set itself memory resource limit. Parameters are: Number of bytes

Recommended Action No special action is required.

Error Message IGMP-3-SNOOP_CONFIG_ERROR: SNOOP: Couldn't configure %s, please configure %s first.

Explanation _IGMP_ snooping could not configure a parameter because of dependencies. Parameters are: Configuring parameter, Dependent parameter

Recommended Action No special action is required.

Error Message IGMP-3-SOURCE_DEL: Couldn't delete source entry for (%s, %s) (%s) due to %s from snooping database

Explanation _IGMP_ failed to delete the snooping-db source entry. Parameters are: Source address, Group address, Vlan-id, Failure reason

Recommended Action No special action is required.

Error Message IGMP-3-STATE_LIMIT: Exceeded state-limit for interface %s - dropping

Explanation Exceeded the state-limit for interface. Parameters are: Interface

Recommended Action No special action is required.

Error Message IGMP-3-SYSMGR_DISPATCH: Error returned from sysmgr_dispatch(), errno: %s

Explanation _IGMP_ called a System Manager API which returned an error. Parameters are: Error description

Recommended Action Dump core, then restart component.

Error Message IGMP-3-TIMER_FAILED: %s failed for %s in %s

Explanation _IGMP_ process failed to configure a timer event. Parameters are: Timer operation, Timer name, Function name

Recommended Action Dump core, then restart component.

Error Message IGMP-3-TXLIST_CREATE: Couldn't create txlist for %s

Explanation _IGMP_ failed to create txlist resource. Parameters are: Data type

Recommended Action Dump core, then restart component.

Error Message IGMP-3-UNKNOWN_MFDM_OPC: igmp_snoop_mfdm_main(): reeceived unknown opcode %d

Explanation _IGMP_ process received unknown Interprocess message from MFDM, dropped. Parameters are: Operation code

Recommended Action No special action is required.

Error Message IGMP-3-UNKNOWN_MTYPE: Unknown mtype: %d/%d in %s, opc:%d, from:%s

Explanation _IGMP_ process received unknown Interprocess message, dropped. Parameters are: Major ID, Minor ID, Function name

Recommended Action No special action is required.

Error Message IGMP-3-VLAN_DEL: Couldn't delete vlan entry for %s due to %s from snooping database

Explanation _IGMP_ failed to delete the snooping-db vlan entry. Parameters are: Vlan-id, Failure reason

Recommended Action No special action is required.

Error Message IGMP-3-VLAN_EXISTS: SNOOP: Couldn't create %s, already esists

Explanation _IGMP_ failed to create vlan resource. Parameters are: VLAN ID

Recommended Action No special action is required.

Error Message IGMP-3-vPC_API_FAILED: %s%s

Explanation API failed in vPC _IGMP_ snoop module. Parameters are: Error message, Error

Recommended Action No special action is required.

Error Message IGMP-3-vPC_ERROR: %s%s

Explanation vPC related messages. Parameters are: vPC related message, Error message

Recommended Action No special action is required.

Error Message IGMP-3-VRF_CREATE:

Explanation _IGMP_ process could not create the VRF context. Parameters are: VRF name

Recommended Action Dump core, then reload the stack.

IGMP-4

Error Message IGMP-4-API_NO_SUCCESS: %s did not succeed in %s

Explanation _IGMP_ process failed in invoking an API. Parameters are: API name, Function name, Failure reason

Recommended Action No special action is required.

Error Message IGMP-4-QUERY_DROP_ON_SAT_PORT: Since router ports on fexes is not supported, dropping queries received on fex interface %s.

Explanation Since, having router ports on fexes is not supported, wedrop queries received on fex interfaces. Parameters are: Interface

Recommended Action No special action is required.

Error Message IGMP-4-SYSTEM_RESOURCE_THRESHOLD_WARNING: System resource usage for %s is above 84%

Explanation _IGMP_ entries reached 84% of Threshold. Parameters are: Module name

Recommended Action No special action is required.

IGMP-5

Error Message IGMP-5-EXPLICIT_TRACKING_V2_LIMIT: _IGMP_ snooping v2 explicit tracking limit of 16K entries reached.\n

Explanation The _IGMP_ explicit tracking database for V2 has reached the maximum limit of 16K entries.

Recommended Action 

Error Message IGMP-5-IGMP_DATA_LEN: IP data len %d invalid in %s

Explanation IP data len invalid. Parameters are: data len, Function name

Recommended Action No special action is required.

Error Message IGMP-5-IGMP_IP_LEN: IP packet len %d invalid in %s

Explanation IP Packet len invalid. Parameters are: ip len, Function name

Recommended Action No special action is required.

Error Message IGMP-5-SNOOP_LOOKUP_MAC_FOR_ALL: Changed to MAC based lookup for ALL vlans\n

Explanation If a vlan lookup mode is MAC and vdc-mode is changed to mixed from non-mixed, lookup mode is changed to MAC for ALL VLANs.

Recommended Action 

Error Message IGMP-5-SNOOP_LOOKUP_MAC_VXLAN: Mac Based Lookup and VXLAN together not supported\n

Explanation If a any of the vlan lookup mode is MAC and we have vxlanenabled then we need to remove mac lkup for Vxlan to func properly.

Recommended Action 

IGMP-6

Error Message IGMP-6-AS_LIMIT_INCREASED: Address space size for %s increased %d times

Explanation _IGMP_ process incremented AS memory resource limit. Parameters are: Module name, Increment count

Recommended Action No special action is required.

Error Message IGMP-6-HA_SEQNO_SYNC: HA sequence number sync to standby failed, %s

Explanation _IGMP_ -SNOOP HA sequence number sync to standby failed. Parameters are: Error description

Recommended Action No special action is required.

Error Message IGMP-6-HA_STATEFUL: Stateful HA %s

Explanation _IGMP_ -SNOOP stateful restart status. Parameters are: State description

Recommended Action No special action is required.

Error Message IGMP-6-HA_SYNC: HA sync to standby failed, %s

Explanation _IGMP_ -SNOOP HA sync message to standby failed. Parameters are: Error description

Recommended Action No special action is required.

Error Message IGMP-6-NO_FREE_BUF: Could not get free buffers for %s in %s

Explanation Failed to get free buffers. Parameters are: RIB name, Function name

Recommended Action No special action is required.

Error Message IGMP-6-RECEIVE_QUERY: Received %s interface %s from %s

Explanation _IGMP_ version mismatch, query still processed. Parameters are: _IGMP_ version mismatch, Interface, Source address

Recommended Action No special action is required.

Error Message IGMP-6-RESERVE_LIMIT_WARNING: Exceeded 80 percent of the reserve-limit for interface %s

Explanation Exceeded 80 percent of the reserve-limit for interface. Parameters are: Interface

Recommended Action No special action is required.

Error Message IGMP-6-RESTART_SHUTDOWN:

Explanation _IGMP_ process is shutting itself down due to the restartcommand.

Recommended Action No special action is required.

Error Message IGMP-6-SHUTDOWN:

Explanation _IGMP_ process is shutting itself down.

Recommended Action No special action is required.

Error Message IGMP-6-STATE_LIMIT_WARNING: Exceeded 80 percent of the state-limit for interface %s

Explanation Exceeded 80 percent of the state-limit for interface. Parameters are: Interface

Recommended Action No special action is required.

Error Message IGMP-6-UNKNOWN_OPC: Received unknown mts opcode %d

Explanation _IGMP_ process received unknown Interprocess message, dropped. Parameters are: Operation Code

Recommended Action No special action is required.

Error Message IGMP-6-vPC_INFO: %s%s

Explanation vPC related messages. Parameters are: vPC related message, Info message

Recommended Action No special action is required.

IGMPSN

This section contains the IGMPSN messages.

IGMPSN-2

Error Message IGMPSN-2-NO_ENQUEUE: Unable to enqueue send element for peer %s

Explanation IGMPSN process failed to send a message over the TCP socket to peer. Parameters are: Peer IP address

Recommended Action No special action is required.

Error Message IGMPSN-2-NO_LISTEN_SOCKET: Fatal error, can't get listen socket setup in %s

Explanation IGMPSN process failed to obtain TCP packet. Parameters are: Function name

Recommended Action Dump core, then restart component.

Error Message IGMPSN-2-OUT_OF_SYNC_TCP_LEN: TCP data stream may be out of sync, suspect TLV length of %d from peer %s

Explanation IGMPSN process received invalid packet length from peer. Parameters are: TLV length, Peer IP address

Recommended Action No special action is required.

Error Message IGMPSN-2-OUT_OF_SYNC_TCP_TYPE: TCP data stream may be out of sync, suspect TLV type of %d from peer %s

Explanation IGMPSN process received malformed TLV from peer. Parameters are: TLV type, Peer IP address

Recommended Action No special action is required.

Error Message IGMPSN-2-SEND_BYTES_MISMATCH: Bytes sent(%d) exceeded Bytes to send(%u) for %s in %s

Explanation Number of Bytes sent to IGMPSN Peer exceeded Bytes to send. Parameters are: bytes sent, bytes to send, Peer IP address, function name

Recommended Action No special action is required.

Error Message IGMPSN-2-SEND_QUEUE_CORRUPT: Send queue corrupted for peer %s

Explanation The TCP socket send queue is corrupted. Connection to peer will be reset. Parameters are: Peer IP address

Recommended Action No special action is required.

IGMPSN-3

Error Message IGMPSN-3-ACCEPT: In %s, %s failed with errmsg: %s

Explanation IGMPSN process failed to accept connection. Parameters are: Function name, TSP API, Error message

Recommended Action No special action is required.

Error Message IGMPSN-3-ALREADY_RUNNING: IGMPSN already running, exiting - %s

Explanation Another IGMPSN process is already running, this process will shutdown. Parameters are: Error message

Recommended Action No special action is required.

Error Message IGMPSN-3-API_FAILED: %s failed in %s

Explanation IGMPSN process failed in invoking an API. Parameters are: API name, Function in which API failed

Recommended Action No special action is required.

Error Message IGMPSN-3-AS_NUMBER: IGMPSN/BGP local AS number is - %s

Explanation IGMPSN process local AS number. Parameters are: AS number

Recommended Action No special action is required.

Error Message IGMPSN-3-CV_INIT: Couldn't init cond var %s

Explanation IGMPSN process failed to initialize conditional-variable resource. Parameters are: Thread Name

Recommended Action Dump core, then restart component.

Error Message IGMPSN-3-FM_ERROR: FM could not shut down IGMPSN process

Explanation IGMPSN could not process the disable-req from FM.

Recommended Action Dump core, then restart component.

Error Message IGMPSN-3-GETSOCKNAME: In %s, %s failed with errmsg: %s

Explanation TSP api tsp_getsockname returned error. Parameters are: Function name, TSP API, Error message

Recommended Action No special action is required.

Error Message IGMPSN-3-IGMPSN_INIT: IGMPSN init failed: %s

Explanation IGMPSN process initialization failed. Parameters are: Component Name

Recommended Action Dump core, then restart component.

Error Message IGMPSN-3-INVALID_TLV: Invalid TLV, type: %d, length: %d from peer %s

Explanation IGMPSN process received an invalid packet. Appropriate error packet returned. Parameters are: TLV type, TLV length, Peer IP address

Recommended Action No special action is required.

Error Message IGMPSN-3-LIB_MTS_FAILED: %s failed in %s, errno: %s

Explanation Process failed to access the IGMPSN mts-queue. Parameters are: MTS function name, Function in which MTS function failed, Error message

Recommended Action No special action is required.

Error Message IGMPSN-3-MALLOC_FAILED: %s failed in %s

Explanation IGMPSN process is out of free memory. Parameters are: Malloc function, Function in which Malloc failed

Recommended Action Configure the network or router to decrease the number of routes.

Error Message IGMPSN-3-MQ_FAILED: %s failed in %s, errno: %s

Explanation IGMPSN process failed to access the message-queue. Parameters are: MQ function name, Function in which MQ function failed, Error message

Recommended Action No special action is required.

Error Message IGMPSN-3-MRIB_ROUTE: In %s, %s failed to add mrib route

Explanation IGMPSN process failed to add mrib routes. Parameters are: Function name, mrib_add_route

Recommended Action No special action is required.

Error Message IGMPSN-3-MTS_BIND: In %s, %s failed due to %s

Explanation IGMPSN called a MTS API which returned an error. Parameters are: Function name,MTS API,Error message

Recommended Action Dump core, then restart component.

Error Message IGMPSN-3-MTS_DROP: Error returned from mts_drop(), errmsg: %s

Explanation IGMPSN called a MTS API which returned an error. Parameters are: Error message

Recommended Action Dump core, then restart component.

Error Message IGMPSN-3-MTS_FAILED: %s failed in %s, errno: %s

Explanation IGMPSN process failed to access the mts-queue. Parameters are: MTS function name, Function in which MTS function failed, Error message

Recommended Action No special action is required.

Error Message IGMPSN-3-MTS_RECV: Error returned from mts_recv(), errmsg: %s

Explanation IGMPSN called a MTS API which returned an error. Parameters are: Error message

Recommended Action Dump core, then restart component.

Error Message IGMPSN-3-MUTEX_INIT: Couldn't init mutex %s

Explanation IGMPSN process failed to initialize mutex system resource. Parameters are: Thread Name

Recommended Action Dump core, then restart component.

Error Message IGMPSN-3-NO_SET_PRIORITY: Failed to set policy or priority in %s

Explanation IGMPSN process could not set itself process priority, exiting. Parameters are: Function name

Recommended Action No special action is required.

Error Message IGMPSN-3-NO_SHUTDOWN: Unable to shutdown igmpsn_main_thread - %s

Explanation IGMPSN process unable to shut itself down. Parameters are: Message

Recommended Action Dump core, then restart component.

Error Message IGMPSN-3-NOSOURCE: Resetting peer due to VRF change for connect-source %s

Explanation The configured interface used for the connect-sourcehas moved to another VRF.

Recommended Action No special action is required.

Error Message IGMPSN-3-PTHREAD_FAILED: %s failed in %s for thread %s

Explanation IGMPSN process failed to create a task thread. Parameters are: PTHREAD function name, Function in which PTHREAD function failed, Error message

Recommended Action Dump core, then restart component.

Error Message IGMPSN-3-RESTART_REASON: IGMPSN process has restarted, restart reason: %s\n

Explanation IGMPSN is restoring the routes it had added in previous instance. Parameters are: Restart reason

Recommended Action No special action is required.

Error Message IGMPSN-3-SDB_CLIENT_ERROR: Failed to initialize shared database client with status %x and errmsg: %s\n

Explanation IGMPSN process could not initialize shared database, client. Parameters are: Status,Error Message

Recommended Action No special action is required.

Error Message IGMPSN-3-SELECT: In %s, %s failed with errmsg: %s

Explanation IGMPSN process failed to select. Parameters are: Function name, TSP API, Error message

Recommended Action No special action is required.

Error Message IGMPSN-3-SET_SOCKET_OPTIONS: In %s, %s failed for %s

Explanation IGMPSN process failed while setting socket options. Parameters are: Function name, API, Socket option

Recommended Action No special action is required.

Error Message IGMPSN-3-SETRLIMIT_FAILED: Data segment allocation of %d failed

Explanation IGMPSN process could not set itself memory resource limit, exiting. Parameters are: Size

Recommended Action No special action is required.

Error Message IGMPSN-3-SETSOCKOPT: In %s, %s failed while setting %s option with errmsg: %s

Explanation IGMPSN process failed while setting tsp socket options. Parameters are: Function name, TSP API, Socket option, Error message

Recommended Action No special action is required.

Error Message IGMPSN-3-SETUPSOCKET_ERROR: In %s, %s failed to create connection with %s

Explanation IGMPSN process failed to select. Parameters are: Function name, TSP API, IP address

Recommended Action No special action is required.

Error Message IGMPSN-3-SM_FAILED: %s failed in %s, errno: %s

Explanation IGMPSN process failed to access the System shared memory resource. Parameters are: SM function name, Function in which SM function failed, Error message

Recommended Action No special action is required.

Error Message IGMPSN-3-SOCKET_BIND: In %s, %s failed with errmsg %s for %s

Explanation IGMPSN process failed to bind. Parameters are: Function name, TSP API, Error message, IP address

Recommended Action No special action is required.

Error Message IGMPSN-3-SOCKET_CONNECT: In %s, %s failed to connect %s with context name:%s and errmsg: %s

Explanation IGMPSN process failed to connect to peer. Parameters are: Function name, TSP API, Peer IP address, Context name, Error message

Recommended Action No special action is required.

Error Message IGMPSN-3-SOCKET_ERROR: In %s, %s failed with errmsg: %s

Explanation IGMPSN process failed to create socket. Parameters are: Function name, TSP API, Error message

Recommended Action No special action is required.

Error Message IGMPSN-3-SYSMGR_DISPATCH: Error returned from sysmgr_dispatch(), errmsg: %s

Explanation IGMPSN called a System Manager API which returned an error. Parameters are: Error message

Recommended Action Dump core, then restart component.

Error Message IGMPSN-3-SYSMGR_INIT: Error in %s while %s

Explanation IGMPSN called a active timer API which returned an error. Parameters are: Function name,Cause

Recommended Action Dump core, then restart component.

Error Message IGMPSN-3-TXLIST_CREATE: Couldn't create txlist for %s in VRF:%s

Explanation IGMPSN failed to create txlist resource. Parameters are: Data type, The VRF that failure occured in

Recommended Action Dump core, then restart component.

Error Message IGMPSN-3-UNKNOWN_MTYPE: Unknown mtype: %d/%d in %s

Explanation IGMPSN process received unknown Interprocess message, dropped. Parameters are: Major type, Minor type, Function name

Recommended Action No special action is required.

IGMPSN-5

Error Message IGMPSN-5-PEER_UPDOWN: Session to peer %s going %s

Explanation IGMPSN peer is going UP/DOWN. Parameters are: Peer IP Address, up/down

Recommended Action No special action is required.

IGMPSN-6

Error Message IGMPSN-6-RESTART_SHUTDOWN: IGMPSN shutting self down via restart command

Explanation IGMPSN process is shutting itself down due to the restartcommand.

Recommended Action No special action is required.

Error Message IGMPSN-6-SHUTDOWN: Shutting down IGMPSN - %s

Explanation IGMPSN process is shutting itself down. Parameters are: Reason for shutdown

Recommended Action No special action is required.

Error Message IGMPSN-6-UNKNOWN_OPC: Received unknown mts opcode %d in %s

Explanation IGMPSN process received unknown Interprocess message, dropped. Parameters are: MTS opcode, Function name

Recommended Action No special action is required.

IGMPSN-7

Error Message IGMPSN-7-OBJSTORE: Objstore API %s() failed with error: %d\n

Explanation Objstore API has failed.

Recommended Action Keep running, do nothing special.

IM

This section contains the IM messages.

IM-2

Error Message IM-2-AM_GETPIB: Unable to get pib from AM (pibname %s)

Explanation Could not initialize with Adjacency Manager.

Recommended Action Restart component.

Error Message IM-2-APIINIT: Unable to initialize %s API

Explanation Could not initialize server APIs.

Recommended Action Restart component.

Error Message IM-2-APILAUNCH: Unable to start %s

Explanation Could not start the specified protocol component.

Recommended Action Restart component.

Error Message IM-2-APIREGISTER: Unable to register with %s API

Explanation Could not register with specified server component.

Recommended Action Restart component.

Error Message IM-2-ATTACH: Unable to attach to %s

Explanation Could not attach to server shared memory.

Recommended Action Restart component.

Error Message IM-2-BADTUN: Bad tunnel type

Explanation Could not set the tunnel to specified type.

Recommended Action Restart component.

Error Message IM-2-BFCLEAR: Cannot clear bit %d in %s

Explanation Could not clear a bit in the specified bitfield.

Recommended Action Restart component.

Error Message IM-2-BFCLEARALL: Cannot clear all bits in %s

Explanation Could not clear all in the specified bitfield.

Recommended Action Restart component.

Error Message IM-2-BFCREATE: Cannot create %s

Explanation Could not create specified bitfield.

Recommended Action Restart component.

Error Message IM-2-BFFULL: Bit field %s is full

Explanation Specified bitfield does not have any available space.

Recommended Action Restart component.

Error Message IM-2-BFINIT: %s

Explanation Specified bitfiled could not be initialized.

Recommended Action Restart component.

Error Message IM-2-BFSET: Cannot set bit %d in %s

Explanation Could not set a bit in the specified bitfield.

Recommended Action Restart component.

Error Message IM-2-BFSETALL: Cannot set all bits in %s

Explanation Could not set all bits in the specified bitfield.

Recommended Action Restart component.

Error Message IM-2-CLICOMMANDSINIT: CLI commands could not be requested

Explanation Request to CLI server for IM CLI commands failed.

Recommended Action Restart component.

Error Message IM-2-CLT_GET_DRVINDICES: Could not get driver indices

Explanation Could not calculate the totoal number of interface driver components.

Recommended Action Restart component.

Error Message IM-2-CLTREGISTER: Client %s registration failed, %s

Explanation IM client could not be registered due to specified reason.

Recommended Action Restart component.

Error Message IM-2-CLTUNREGISTER: Client %s deregister failed, %s

Explanation IM client could not be deregistered due to specified reason.

Recommended Action Restart component.

Error Message IM-2-DSTADDPT: Could not add tunnel node to dest PT, reason %d

Explanation Could not add the tunnel destination information to the internal data structure.

Recommended Action Restart component.

Error Message IM-2-GETCONTEXT: Unable to get context from URIB (contextname: %s)

Explanation Could not initialize with URIB server.

Recommended Action Restart component.

Error Message IM-2-INTTIMER: Interface %s, %s failed

Explanation Interface related timer could not be started.

Recommended Action Restart component.

Error Message IM-2-MQOPEN: unable to open mq %s: %s

Explanation Unable to open the specified message queue.

Recommended Action Restart component.

Error Message IM-2-NHADDPT: Could not add tunnel next-hop information to PT, reason %d

Explanation Could not add the next-hop information for the tunnel to the internal data structure.

Recommended Action Restart component.

Error Message IM-2-NOMEM: Malloc (%ld) failed for: %s

Explanation Memory allocation failed for the specified structure. We are running out of memory.

Recommended Action Out of memory. Add more memory to the router.

Error Message IM-2-PTHREAD: procket_pthread_create failed for %s: error %d

Explanation Could not create new thread.

Recommended Action Restart component.

Error Message IM-2-SHMCREATE: Cannot create shared memory, reason %d

Explanation IM is unable to create shared memory resources.

Recommended Action Restart component.

Error Message IM-2-SUPER_MEMBER_MISMATCH: super member: count %d, actual %d

Explanation Super interface member list is corrupted.

Recommended Action Restart component.

Error Message IM-2-SYSMGRNOTIFY: sysmgr notification for %s failed

Explanation Request for sysmgr notification for the specified component failed.

Recommended Action Restart component.

Error Message IM-2-TIMER: %s failed

Explanation Operation on the specified timer failed.

Recommended Action Restart component.

Error Message IM-2-TXLIST_BAD_OBJTYPE: Bad txlist object type %d

Explanation Unknown object type encountered in the transmit list. It could be indication of corrupted transmit list.

Recommended Action Restart component.

Error Message IM-2-TXLIST_CREATE: %s

Explanation Could not create transmit list.

Recommended Action Restart component.

Error Message IM-2-TXLIST_DELETE_MEMBER: txlist delete member failed for element %d

Explanation Could not remove client from the transmit list.

Recommended Action Restart component.

Error Message IM-2-TXLIST_INSERT_ELEMENT: txlist insert element failed for iod %d

Explanation Could not insert intreface in the transmit list.

Recommended Action Restart component.

Error Message IM-2-TXLIST_INSERT_MEMBER: txlist insert member failed for client %s

Explanation Could not insert client in the transmit list.

Recommended Action Restart component.

Error Message IM-2-TXTHREAD_INIT: %s

Explanation Could not initialize transmit list thread.

Recommended Action Restart component.

Error Message IM-2-URIB_GETPIB: Unable to get pib from URIB (pib 0x%p, pibname %s, context 0x%p, contexname %s

Explanation Could not initialize with URIB server.

Recommended Action Restart component.

Error Message IM-2-URIBRNH: URIB %s RNH failed for address %s

Explanation Could not setup request for RNH notification with URIB.

Recommended Action Restart component.

Error Message IM-2-WORKQ_ADD: Failed to add %s to work queue

Explanation Could not add the work item to the queue for worker thread.

Recommended Action Restart component.

Error Message IM-2-WORKQ_INIT: Failed to initialize work queue

Explanation Failed to initialize work queue.

Recommended Action Restart component.

Error Message IM-2-WORKQ_SYSMGR: %s is no longer alive, returning from %s

Explanation Server component is going down. Cannot do any more work for that server.

Recommended Action Restart component.

Error Message IM-2-WORKQ_WAIT: Error while waiting for work event, %d

Explanation Error while waiting for events in the worker thread.

Recommended Action Restart component.

IM-3

Error Message IM-3-CLT_DIFF_EPID: epids differ, old %u, new %u

Explanation An older instance of the client is already registered with IM. The new instance will overwrite the old one.

Recommended Action Keep running, do nothing special.

Error Message IM-3-CLTCLEAREXT: Client %s clear extension failed, %s

Explanation IM could not clear client extension for the specified interface.

Recommended Action Keep running, do nothing special.

Error Message IM-3-CLTEXISTS: Client %s is already registered with IM via queue %s

Explanation An older instance of the client is already registered with IM. The new instance will overwrite the old one.

Recommended Action Keep running, do nothing special.

Error Message IM-3-CLTSETEXT: Client %s set extension failed, %s

Explanation IM could not set client extension for the specified interface.

Recommended Action Keep running, do nothing special.

Error Message IM-3-DFBADCLASS: Bad debug filter class 0x%x

Explanation Invalid class of debug filters.

Recommended Action Keep running, do nothing special.

Error Message IM-3-ETH_BAD_STATS: snmp ether stats bad stats

Explanation Could not get interface statistics.

Recommended Action Keep running, do nothing special.

Error Message IM-3-ETH_STATS_REQ: snmp ether stats bad send

Explanation Request to ethernet driver to update statistics failed. This would lead to incorrect interface statistics value.

Recommended Action Keep running, do nothing special.

Error Message IM-3-HEAP_SIZE_ERROR: Increase of heap size from %d to %d failed: %s

Explanation IM could not increase the size of the heap.

Recommended Action Keep running, do nothing special.

Error Message IM-3-IF_CHANGE_MASK_UNKNOWN: Unknown if change mask for interface %s %s

Explanation Undefined change mask has been specified for the given interface.

Recommended Action Keep running, do nothing special.

Error Message IM-3-IMTLV_BAD_MSGTYPE: IM bad tlv message type %d

Explanation Unknown message TLV encountered.

Recommended Action Keep running, do nothing special.

Error Message IM-3-INTADD: Interface %s addition failed, %s

Explanation Interface could be created due to specified reason.

Recommended Action Keep running, do nothing special.

Error Message IM-3-INTADDEXIST: Interface %s addition failed, %d already exists

Explanation Interface currently being added already exists.

Recommended Action Keep running, do nothing special.

Error Message IM-3-INTADDFULL: Interface %s addition failed, Max. number of interfaces exceeded

Explanation Interface could not be configured as Interface Manager has reached its maximum capacity.

Recommended Action Keep running, do nothing special.

Error Message IM-3-INTADDIFMSG: Could not process add interface %lx, %lx, %s

Explanation Received a corrupted message from interface driver.

Recommended Action Keep running, do nothing special.

Error Message IM-3-INTADDPT: Interface %s addition failed, phyloc tree addition, reason %d

Explanation New interface could not added to internal data structure.

Recommended Action Keep running, do nothing special.

Error Message IM-3-INTBAD: Invalid interface %d for %s

Explanation Specified action cannot be take on the interface.

Recommended Action Keep running, do nothing special.

Error Message IM-3-INTDAMPINIT: Interface %s, could not initialize dampening

Explanation Interface dampening could not be initialized.

Recommended Action Keep running, do nothing special.

Error Message IM-3-INTDEL: Interface %s deletion failed, %s

Explanation Interface could not be deleted due to specified reason.

Recommended Action Keep running, do nothing special.

Error Message IM-3-INTDELIFMSGMASK: Could not process delete interface %lx bad mask %lx

Explanation Received a corrupted message from interface driver.

Recommended Action Keep running, do nothing special.

Error Message IM-3-INTLSMSG: Could not process link state message %lx, %lx, %s

Explanation Received a corrupted message from interface driver.

Recommended Action Keep running, do nothing special.

Error Message IM-3-MQSEND: mq_send() error %s while sending %s queue: %s

Explanation Specified message could not be sent to the IM client.

Recommended Action Keep running, do nothing special.

Error Message IM-3-MQUNEXPECT: Recieved unexpected message (%d/%d) on %s queue

Explanation Received an unexpected message on the specified message queue.

Recommended Action Keep running, do nothing special.

Error Message IM-3-MSGPROC: Could not process %s message from pid %d

Explanation Specified client request could not be completed.

Recommended Action Keep running, do nothing special.

Error Message IM-3-MTS_DROP: Error returned from mts_drop(), errno: %s

Explanation IM called a MTS API which returned an error.

Recommended Action No special action is required.

Error Message IM-3-MTS_RECV: Error returned from mts_recv(), errno: %s

Explanation IM called a MTS API which returned an error.

Recommended Action No special action is required.

Error Message IM-3-NO_INTF_BLOCK: Interface block not found while processing %s, iod %d

Explanation Interface related internal data structure could be found.

Recommended Action Keep running, do nothing special.

Error Message IM-3-SNMPAPIDATA: Message data is NULL

Explanation SNMP message does not have memory to store data.

Recommended Action Keep running, do nothing special.

Error Message IM-3-SNMPAPIINIT: Function snmpd_api_init() was not invoked

Explanation SNAMP API is being invoked before it initilization.

Recommended Action Keep running, do nothing special.

Error Message IM-3-SNOMEM: Smalloc (%ld) failed for: %s

Explanation Shared memory allocation failed. We are running out of shared memory resources.

Recommended Action Out of memory. Add more memory to the router.

Error Message IM-3-SONETINTTIMERFAIL: Sonet interval timer %s failed on %s

Explanation Specified timer could be initialized.

Recommended Action Keep running, do nothing special.

Error Message IM-3-STATS_NODE_BAD: Invalid stats node for %s

Explanation Encountered invalid request to get/clear statistics.

Recommended Action Keep running, do nothing special.

Error Message IM-3-STATS_NODE_NOT_FOUND: Cound not find stats node for %s

Explanation Could not find the internal data structure.

Recommended Action Keep running, do nothing special.

Error Message IM-3-STATSQ_INIT: Failed to initialize stats queue

Explanation An internal software error occured.

Recommended Action Restart component.

Error Message IM-3-VLANADDPT: Could not add Vlan information in tree, reason %d

Explanation VLAN interface information could not be added to internal data structure due to specified reason.

Recommended Action Keep running, do nothing special.

IM-6

Error Message IM-6-LINEPROTO: Line protocol on interface %s changed to state %s

Explanation Line protocol on the specified interface has changed.

Recommended Action No special action is required.

Error Message IM-6-MTS_UNKNOWN_MSG: Received unknown MTS message with opcde %d, dropping it

Explanation IM recieved an unknown MTS message. The message is dropped.

Recommended Action No special action is required.

IP

This section contains the IP messages.

IP-2

Error Message IP-2-CRIT_FAILURE: Failed to %s

Explanation A Critical operation has failed in the IP process.

Recommended Action Dump core, then restart component.

Error Message IP-2-IP_NS_NETLINK_CREATE_FAILED: NS (%s) Netlink socket create failed (%d)

Explanation NS Netlink socket create failed.

Recommended Action Report the issue to Customer Support.

Error Message IP-2-IP_STARTUP_FAILURE: Failed to %s during startup. error %d

Explanation A Critical operation has failed during startup of the IP process.

Recommended Action No special action is required.

Error Message IP-2-NAT_MAX_LIMIT: NAT: Can't create dynamic translations, %s

Explanation The configured max limit is reached.

Recommended Action No special action is required.

IP-3

Error Message IP-3-CV_INIT: Couldn't init cond var %s

Explanation IP process failed to initialize conditional-variable resource. Parameters are: Thread Name

Recommended Action Dump core, then restart component.

Error Message IP-3-INVALID_IF_INDEX: Invalid interface index received from %d

Explanation Invalid interface index received. Parameters are: Thread Name

Recommended Action Report the issue to Customer Support.

Error Message IP-3-IP_CLIENT_GET: HA client filter recovery failed (%d)

Explanation HA client filter recovery failed.

Recommended Action Report the issue to Customer Support.

Error Message IP-3-IP_CLNT_FAILURE: Invalid IP registration reply. Message major type %d, minor type %d

Explanation An IP client has failed in the registration process withIP.

Recommended Action Report the issue to Customer Support.

Error Message IP-3-IP_FAILURE: Failed to %s

Explanation A Critical operation has failed in the IP process.

Recommended Action Report the issue to Customer Support.

Error Message IP-3-IP_HA_UPDATE: HA update failed (%d)

Explanation HA update failed.

Recommended Action Report the issue to Customer Support.

Error Message IP-3-IP_INTERNAL_ERROR: %s

Explanation An internal error has occured in the IP process.

Recommended Action Report the issue to Customer Support.

Error Message IP-3-IP_INTF_DAMPENED: Interface %s is suppressed

Explanation Interface got deactivated for L3 service due to frequent flappings.

Recommended Action please check the interface link. This link is frequently changing.

Error Message IP-3-IP_INTF_UNDAMPENED: Interface %s is unsuppressed

Explanation Interface got activated for L3 service.

Recommended Action No special action is required.

Error Message IP-3-IP_MSG_TO_TLV: TLV Conversion failed (%d)

Explanation TLV conversion failed.

Recommended Action Report the issue to Customer Support.

Error Message IP-3-IP_MTSDROP: Error returned from mts_drop(), errno: %s

Explanation IP called a MTS API which returned an error.

Recommended Action No special action is required.

Error Message IP-3-IP_MTSRECV: Error returned from mts_recv(), errno: %s

Explanation IP called a MTS API which returned an error.

Recommended Action No special action is required.

Error Message IP-3-IP_MTSSEND: Error returned from mts_send(), errno: %s

Explanation IP called a MTS API which returned an error.

Recommended Action No special action is required.

Error Message IP-3-IP_NO_MBUF: Failed to allocate mbuf %s

Explanation The IP process has run out of network buffers.

Recommended Action Report the issue to Customer Support.

Error Message IP-3-IP_NO_MEM: Failed to allocate private memory for %s

Explanation The IP process has run out of private memory.

Recommended Action Report the issue to Customer Support.

Error Message IP-3-IP_THR_CREATE: Failed to create %s thread. error %d

Explanation A failure occured while creating a thread.

Recommended Action Report the issue to Customer Support.

Error Message IP-3-IP_TLV_TO_STRUCT: TLV to Struct Conversion failed (%d)

Explanation TLV to Struct conversion failed.

Recommended Action Report the issue to Customer Support.

Error Message IP-3-IP_UNK_MSG: Unrecognized message major type %d, minor type %d

Explanation An unknown message was received from another process.

Recommended Action Report the issue to Customer Support.

Error Message IP-3-MRIB_ADD_ROUTE: MRIB add route failed in %s for VRF %s

Explanation IP failed to add route in MRIB. Parameters are: Function Name, Context Name

Recommended Action No special action is required.

Error Message IP-3-MRIB_DELETE_ROUTE: MRIB delete route failed in %s for VRF %s

Explanation IP failed to delete route from MRIB. Parameters are: Function Name, Context Name

Recommended Action No special action is required.

Error Message IP-3-MV_INIT: Couldn't init mutex %s

Explanation IP process failed to initialize mutex system resource. Parameters are: Thread Name

Recommended Action Dump core, then restart component.

Error Message IP-3-NO_SH_MEM: Failed to allocate shared memory %s

Explanation The IP process has run out of shared memory.

Recommended Action Report the issue to Customer Support.

Error Message IP-3-PSS_API_INIT: Ksink pss API init failed (%d)

Explanation Ksink pss API init failed.

Recommended Action Report the issue to Customer Support.

Error Message IP-3-TXLIST_CREATE: Couldn't create txlist for %s

Explanation IP failed to create txlist resource. Parameters are: Data type

Recommended Action Dump core, then restart component.

Error Message IP-3-URIB_ERR: Failed to %s urib

Explanation A failure occured in a transaction with URIB.

Recommended Action Report the issue to Customer Support.

IP-6

Error Message IP-6-BAD_ICMP_PKT: Received ICMP packet with bad length (%d). Min len %d, Adv len %d, IP hdr length %d, Expected IP hdr len %d

Explanation An ICMP packet was received with a bad length.

Recommended Action No special action is required.

Error Message IP-6-IM_RECOVER_ERROR: Failed to recover correct information for interface %s %d

Explanation IP could not recover the info for interface.

Recommended Action No special action is required.

Error Message IP-6-IP_MTS_UNKNOWN_MSG: Received unknown MTS message with opcde %d, dropping it

Explanation IP recieved an unknown message. The message is dropped.

Recommended Action No special action is required.

Error Message IP-6-IP_UNK_MSG_MAJOR: Unrecognized message from %s. Major type %d

Explanation An unknown message (major) was received from another process.

Recommended Action Report the issue to Customer Support.

Error Message IP-6-IP_UNK_MSG_MINOR: Unrecognized message from %s. Minor type %d

Explanation An unknown message (minor) was received from another process.

Recommended Action Report the issue to Customer Support.

Error Message IP-6-MQ_FLUSH: Flushing %d messages from the MRIB message queue

Explanation The MRIB message queue was flushed after a restart of the IP process.

Recommended Action No special action is required.

Error Message IP-6-REG_SEND_MSG: Suppress PIM Data Register for (%s, %s) due to suppression-timer\n

Explanation Suppress PIM Data Register due to suppression-timer. Parameters are: Source address, Group address

Recommended Action No special action is required.

Error Message IP-6-STATS_ERROR: Failed to get hardware statistics for interface %s, reason %s

Explanation IP could not get the requested statistics from the hardware.

Recommended Action No special action is required.

Error Message IP-6-SYSMAN_CLEANUP: Terminated by SYSMAN cleanup signal %d

Explanation System Manager sent a cleanup signal to IP to exit the process.

Recommended Action No special action is required.

IP-7

Error Message IP-7-INVALID_NOTIFY: %s

Explanation UNEXPECTED_ERROR_EXPLANATION. Parameters are: log string

Recommended Action No special action is required.

IPv6

This section contains the IPv6 messages.

IPv6-2

Error Message IPv6-2-IPV6_MSG_DAD_FAILED: IPv6 DAD failed for %s

Explanation Duplicate address detected over network.

Recommended Action No special action is required.

Error Message IPv6-2-IPV6_MSG_MVSH: %s

Explanation shutting down interface using mvsh.

Recommended Action No special action is required.

Error Message IPv6-2-RECURSIVE_LOOP: Recursive loop in %s

Explanation There is a recursive function calling loop.

Recommended Action Report the issue to Customer Support.

Error Message IPv6-2-SDB_CREAT: Failed to create shared database

Explanation Component API call failed in IPv6.

Recommended Action No special action is required.

Error Message IPv6-2-SDB_DESTROY: Failed to destroy shared database

Explanation Component API call failed in IPv6.

Recommended Action No special action is required.

Error Message IPv6-2-SDB_OPEN: Failed to open shared database

Explanation Component API call failed in IPv6.

Recommended Action No special action is required.

IPv6-3

Error Message IPv6-3-BAD_CONTEXT: Bad context-id %d in %s

Explanation The context cannot be found.

Recommended Action No special action is required.

Error Message IPv6-3-FRAME_LENGTH_LONG: Frame length: %d greater than maximum IPv6 payload size for packet received on interface %s

Explanation The packet has too big frame length, dropped.

Recommended Action No special action is required.

Error Message IPv6-3-GET_PIB_FAILED: %s failed in %s

Explanation IPv6 could not find client's PIB handle.

Recommended Action No special action is required.

Error Message IPv6-3-INVALID_VERSION: Invalid IPv6 version: %d for packet received on interface %s

Explanation The packet has invalid protocol version field, dropped.

Recommended Action No special action is required.

Error Message IPv6-3-IPV6_API_FAILED_IOD: %s failed in %s, iod = %d

Explanation Component API call failed in IPv6.

Recommended Action No special action is required.

Error Message IPv6-3-IPV6_API_FAILED: %s failed in %s

Explanation Component API call failed in IPv6.

Recommended Action No special action is required.

Error Message IPv6-3-IPV6_CV_INIT: Couldn't init cond var %s

Explanation IPv6 process failed to initialize conditional-variable resource. Parameters are: Thread Name

Recommended Action Dump core, then restart component.

Error Message IPv6-3-IPV6_MSG_TO_TLV: TLV Conversion failed (%d)

Explanation TLV conversion failed.

Recommended Action Report the issue to Customer Support.

Error Message IPv6-3-IPV6_MTS_RECV: Error returned from mts_recv(), errno: %s

Explanation IPv6 called a MTS API which returned an error.

Recommended Action Dump core, then restart component.

Error Message IPv6-3-IPV6_MTS_UNKNOWN_MSG: Received unknown MTS message with opcde %d, dropping it

Explanation IPv6 recieved an unknown message. The message is dropped.

Recommended Action No special action is required.

Error Message IPv6-3-IPV6_MV_INIT: Couldn't init mutex %s

Explanation IPv6 process failed to initialize mutex system resource. Parameters are: Thread Name

Recommended Action Dump core, then restart component.

Error Message IPv6-3-IPV6_TLV_TO_STRUCT: TLV to Struct Conversion failed (%d)

Explanation TLV to Struct conversion failed.

Recommended Action Report the issue to Customer Support.

Error Message IPv6-3-IPV6_TXLIST_CREATE: Couldn't create txlist for %s

Explanation IPv6 failed to create txlist resource. Parameters are: Data type

Recommended Action Dump core, then restart component.

Error Message IPv6-3-M6RIB_ADD_ROUTE: M6RIB add route failed in %s for VRF %s

Explanation IP failed to add route in M6RIB. Parameters are: Function Name, Context Name

Recommended Action No special action is required.

Error Message IPv6-3-MALLOC_FAILED_PREFIX: %s failed in %s for %s

Explanation IPV6 process is out of free memory.

Recommended Action No special action is required.

Error Message IPv6-3-MALLOC_FAILED: %s failed in %s

Explanation IPv6 process is out of free memory.

Recommended Action No special action is required.

Error Message IPv6-3-MBUF_FAILED: %s failed in %s (%d bytes)

Explanation IPV6 process is out of mbufs.

Recommended Action No special action is required.

Error Message IPv6-3-MQ_FAILED_NAME: %s failed in %s for client %s, errno: %s

Explanation IPv6 failed to access message-queue resource for the client.

Recommended Action No special action is required.

Error Message IPv6-3-MQ_FAILED_PID: %s failed in %s to client pid: %d, errno: %s

Explanation IPv6 failed to access message-queue resource for the client.

Recommended Action No special action is required.

Error Message IPv6-3-MQ_FAILED: %s failed in %s, errno: %s

Explanation IPv6 failed to access message-queue resource.

Recommended Action No special action is required.

Error Message IPv6-3-MTS_FAILED_NAME: %s failed in %s for client %s, errno: %s

Explanation IPv6 failed to access mts-queue resource for the client.

Recommended Action No special action is required.

Error Message IPv6-3-MTS_FAILED_PID: %s failed in %s to client pid: %d, errno: %s

Explanation IPv6 failed to access mts-queue resource for the client.

Recommended Action No special action is required.

Error Message IPv6-3-MTS_FAILED: %s failed in %s, errno: %s

Explanation IPv6 failed to access mts-queue resource.

Recommended Action No special action is required.

Error Message IPv6-3-PID_CONFLICT: Client is using pid: %d/%d with different extended pid: %d

Explanation Multiple clients have same process ids.

Recommended Action No special action is required.

Error Message IPv6-3-PTHREAD_FAILED: %s failed for %s in %s

Explanation IPv6 process failed to create a task thread.

Recommended Action Dump core, then reload the stack.