vsan database
To enter virtual SAN (VSAN) database mode to configure the VSAN information and membership, use the vsan database command.
vsan database
Syntax Description
This command has no arguments or keywords.
Command Default
None.
Command Modes
Global configuration mode.
Command History
Release |
Modification |
---|---|
5.2(1) |
This command was introduced on the Cisco Nexus 7000 Series Switches. |
4.0(1) |
This command was introduced on the Cisco MDS 9000 Series Switches. |
Usage Guidelines
To exit from the VSAN database configuration mode, use the exit command.
Examples
This example shows how to enter the VSAN database configuration mode:
switch# configure terminal
switch(config)# vsan database
switch(config-vsan-db)# exit
switch(config)#