license fcoe module
To modify the license feature for the Fibre Channel over Ethernet (FCoE) module, use the license fcoe module command. To return to the default setting, use the no form of this command.
license fcoe module module-number
no license fcoe module module-number
Syntax Description
module-number |
Module number. The range is from 0 to 21474836471. |
Command Default
None
Command Modes
Configuration mode
Command History
Release |
Modification |
---|---|
5.2(1) |
This command was introduced on the Cisco Nexus 7000 Series Switches. |
Usage Guidelines
None.
Examples
This example shows how to modify the license for the FCoE module:
switch# configure terminal
switch(config)# license fcoe module 1
ERROR: fcoe_mgr: LC not present (err_id 0x42070032)
switch(config)#