New and Changed Information
This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 5500 Series NX-OS Unicast Routing Configuration Guide, Release 6.x. The latest version of this document is available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9670/products_installation_and_configuration_guides_list.html
To check for additional information about Cisco NX-OS Release 6.x, see the Cisco Nexus 5500 Series NX-OS Release Notes, Release 6.0 available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9670/prod_release_notes_list.html
Table 1 summarizes the new and changed features for the Cisco Nexus 5500 Series NX-OS Unicast Routing Configuration Guide, Release 6.x, and tells you where they are documented.
|
|
|
|
|
|---|---|---|---|
Support for Virtual Router Redundancy Protocol version3 (VRRPv3) and Virtual Router Redundancy Service (VRRS) |
VRRP version 3 enables a group of switches to form a single virtual switch to provide redundancy and VRRS improves scalability of VRRPv3. |
||
This feature was introduced for OSPF, BGP, EIGRP, VRRP, HSRP, and Static Routes. |
For OSPFv2, see BFD, page 4-11 . For EIGRP, see BFD, page 6-7 . For Advanced BGP, see BFD, page 8-9 . For Static Routes, see BFD, page 10-3 . For HSRP, see BFD, page 16-7 . For VRRP, see BFD, page 18-5 . |
||
For BGP, EIGRP, and OSPF, the number of maximum paths that can be load-balanced to a destination in equal-cost multi-path (ECMP) routing has increased from 16 to 64. |
Load Balancing and Equal Cost Multipath, page -6 Configuring Optional Parameters on an OSPFv2 Instance, page 4-15 Creating an OSPFv3 Instance, page 5-14 |
||
Feedback