Cisco Nexus 5500 Series NX-OS Fibre Channel over Ethernet Configuration Guide, Release 7.x
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- August 7, 2019
Chapter: Index
Contents
A - C - D - E - F - G - I - L - N - S - V
Index
A
attachingsystem service policy 1C
changed informationdescription 1configuringFCoE over Adapter FEX 1FCoE over enhanced vPC 1jumbo MTU 1leafs 1spines 1creatingD
definingFabricPath VLANs 1disablingFCoE 1E
enablingFabricPath 1enhanced vPCconfiguring FCoE 1over FCoE 1F
FCoEdisable LAN traffic 1disabling 1for enhanced vPC 1FCoE over Adapter FEX 1configuring the switch 1guidelines 1G
guidelinesFCoE over Adapter FEX 1guidelines and limitations 1I
increasing the FabricPath for a vPC+ peer link 1L
Layer 2 switchingEthernet switching 1limitationsFCoE over Adapter FEX 1N
new informationdescription 1S
SAN bootconfiguration example 1with vPC 1system service policyattaching 1V
vPCSAN boot 1SAN boot example 1
Feedback