Cisco ACI Multi-Site Configuration Guide, Release 2.0(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: October 24, 2018

New and Changed Information

This chapter contains the following sections:

New and Changed Information

The following table provides an overview of the significant changes to this guide up to this current release. The table does not provide an exhaustive list of all changes made to the guide or of the new features up to this release.

Table 1. New Features and Changed Behavior in the Cisco ACI Multi-Site Configuration Guide
Cisco ACI Multi-Site Version	Feature	Description	Where Documented
2.0(2)	Contract Preferred Group	Several EPGs can be added to a Contract Preferred Group to allow full communication between the EPGs in a single VRF	Contract Preferred Groups in Schema Management.
2.0(1)	ACI CloudSec Encryption	CloudSec Encryption provides inter-site traffic encryption.	Cisco ACI CloudSec Encryption in Infrastructure Management.
2.0(1)	Layer-3 Multicast	Starting with Release 2.0(1), you can configure Layer-3 Multicast between sites.	Layer 3 Multicast in Schema Management.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)