Ethernet-to-the-Factory 1.2 Design and Implementation Guide
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- December 10, 2013
Book Table of Contents
- Preface
- Ethernet-to-the-Factory Solution Overview
- Solution Architecture
- Basic Network Design
- Implementation of the Cell/Area Zone
- Implementation of Security
- Implementation of High Availability
- Implementation of Network Management
- Characterization of the EttF Cell/Area Zone Design
- Configuration of the EttF Cell/Area Zone
- Configuration of the EttF Demilitarized Zone
- EttF High Availability Testing
Notes
This document describes the Cisco Ethernet-to-the-Factory (EttF) Architecture, which offers value inside industrial operations when part of a larger integrated, industrial automation architecture. This Cisco validated design and implementation guide represents a collaborative development effort from Cisco Systems and Rockwell Automation. It is built on and adds to the design guidelines from the Cisco Ethernet-to-the-Factory solution and the Rockwell Automation Integrated Architecture.
The Cisco Validated Design Program consists of systems and solutions designed, tested, and documented to facilitate faster, more reliable, and more predictable customer deployments. For more information visit http://www.cisco.com/en/US/netsol/ns741/networking_solutions_program_home.html
Feedback