The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The Security Manager installer enables you to install certain applications and, when you do, requires that you install certain other applications. This section describes those applications and their interdependencies:
Common Services 4.2.2 is bundled by default with Security Manager 4.16.
Common Services provides the framework for data storage, login, user role definitions, access privileges, security protocols, and navigation. It also provides the framework for installation, data management, event and message handling, and job and process management. Common Services supplies essential server-side components to Security Manager that include the following:
Note Device and Credential Repository (DCR) functionality within Common Services is not supported in Security Manager 4.16.
Cisco Security Manager is an enterprise-class management application designed to configure firewall, VPN, and intrusion prevention system (IPS) security services on Cisco network and security devices. Cisco Security Manager can be used in networks of all sizes—from small networks to large networks consisting of thousands of devices—by using policy-based management techniques. Cisco Security Manager works in conjunction with the Cisco Security Monitoring, Analysis, and Response System (MARS). Used together, these two products provide a comprehensive security management solution that addresses configuration management, security monitoring, analysis, and mitigation.
Note For more information about Security Manager, visit http://www.cisco.com/go/csmanager. For more information about Cisco Security MARS, visit http://www.cisco.com/go/mars.
To use Security Manager, you must install server and client software.
Security Manager offers the following features and capabilities:
– When you install the server software, you also install read-only versions of the following device managers: Adaptive Security Device Manager (ASDM), PIX Device Manager (PDM), Security Device Manager (SDM), and IPS Device Manager (IDM)
– When you install the server software, you also install a cross-launch point to (but not actual installation of) Cisco Prime Security Manager.
– You can add ASA and PIX devices from Security Manager to Auto Update Server (AUS).
If you choose to install AUS, you can install it on the same server where you install Security Manager or on a different server, such as a server in your DMZ. AUS and Security Manager can share device inventory information and other data. AUS uses a browser-based user interface and requires Common Services.
AUS enables you to upgrade device configuration files and software images on PIX Security Appliance (PIX) and Adaptive Security Appliance (ASA) devices that use the auto update feature. AUS supports a pull model of configuration that you can use for device configuration, configuration updates, device OS updates, and periodic configuration verification. In addition, supported devices that use dynamic IP addresses in combination with the Auto Update feature can use AUS to upgrade their configuration files and pass device and status information.
AUS increases the scalability of your remote security networks, reduces the costs involved in maintaining a remote security network, and enables you to manage dynamically addressed remote firewalls.
For more information about AUS you can refer to the AUS documentation located at the Security Manager site: http://www.cisco.com/go/csmanager.
Other applications are available from Cisco that integrate with Security Manager to provide additional features and benefits:
If you enable Event Management on your Security Manager server, you cannot use that server for the following services:
During the installation or upgrade of Security Manager, the Common Services syslog service port is changed from 514 to 49514. Later, if Security Manager is uninstalled, the port is not reverted to 514. Additional information regarding ports is available in Table 3-1 and in Table A-1.
If the amount of RAM available to the operating system is insufficient, Event Viewer is disabled (see details in Table 3-3); however, the Common Services syslog service port is still changed.