Objects in the REST API

Request Structure

Request Structure:

Requests are sent to the Firepower Management Center as HTTPS requests with the Uniform Resource Identifier (URI) of the form described below: 

https://<management_center_IP_or_name>:<https_port>/<object_URL>/object_UUIDoptions

Where:

  • <management_center_IP_or_name>
    is the IP address or Fully Qualified Domain Name of the Firepower Management Center
  • <https_port>
    is the port number used by the Firepower Management Center for HTTPS connections. This port is always 443.
  • <object_URL>
    is the specific URL for the desired resource. These URLs are unique for each resource and are given below.
  • options
    are the options given with the request. Options can be used to modify the output and filter results. 
  • {UUID}
    Many URLs contain one or more UUIDs which must be specified. Most URIs include the domain UUID, which can be found in the Authentication Token. When deleting or modifying an object, or requesting information about a specific object, the URI will end with the object UUID.

Available request methods are:

  • GET
    – Retrieves data from the specified object. GET is a read-only operation. 
  • PUT
    – Adds the supplied information to the specified object; returns a 404 Resource Not Found error if the object does not exist.

    Note

    Currently PUT may be used to create a new object, but this ability may be removed in later releases. Use POST to create new objects and PUT to modify existing objects. 

  • POST
    – Creates the object with the supplied information. POST operations should be followed with a payload consisting of the JSON object to be created, enclosed in braces: 
    {object]

    Note

    The maximum number of rules you can use depends on memory of the device. There is no set limit, because complex rules use more memory. For rule performance and optimization guidelines, see the Firepower Management Center Configuration Guide. 

  • DELETE
    – Deletes the specified object.
  • PATCH
    – Not supported.

The API supports query parameters for almost all requests. For GET requests, the following query parameters can be used to control the number of of returned objects and the pagination: 

  • expanded
    - This is a True/False value which indicates whether you get a full listing of an item in a list or only a reference. Some fields will only show if this flag is set to true.
  • offset
    - Indicates the position in the list where you want to start.
  • limit
    - Indicates the number of items you want to retrieve in a page.

The API supports filtering on the basis of query parameters passed with a request. Filtering can be done based on specific attributes in a model. The parameters available for filtering vary by object, and are listed with the request below.

Bulk Rule Posting

Multiple access control rules can be added with a POST command using the bulk insert feature. This feature allows as many as 1,000 rules to be addded at once.

This feature is only available for access rules.

The URL for this feature is:

https://{fmc_IP_or_name}:{https_port}/api/fmc_config/v1/domain/{domain_UUID}/policy/accesspolicies/{policy_UUID}/accessrules?bulk=true

The option:

?bulk=true

indicates that that multiple rules will be used in the payload of this request.

All objects in the payload of the bulk POST request must be of the same type. You cannot mix different objects in the same bulk request.

Unlike a normal POST operation, the bulk POST requires a list of JSON objects. This list may have as many as 1,000 objects or as few as one. The individual JSON objects must be enclosed in braces. Each object must be separated by commas, and the entire list is enclosed in brackets: 

[{object}]
[{object1},{object2},{object3},{object4},{object5} …]

The following query parameters are supported in bulk POST requests:

  • bulk=true

    This parameter specifies that the bulk POST feature is being used in the query. This parameter is required for bulk rule posting. 

  • section=mandatory/default

    This parameter specifies the section into which the rules will be added. If this parameter is not used the section will be the default section. Only mandatory and default are allowed values. If a section is specified it must exist or the request will fail. If a section is specified, a category cannot be specified. 

  • category=<Name of the category>

    This parameter specifies the category into which the rules will be added. If a category is specified it must exist or the request will fail. If a category is specified, a section cannot be specified. 

  • insertAfter=<Index of rule>

    This parameter specifies that the rules will be inserted after the specified rule index. If no section or category is specified, the rules will be added to the section or category after the insertion point. 

  • insertBefore=<Index of rule>

    This parameter specifies that the rules will be inserted before the specified rule index.If no section or category is specified, the rules will be added to the section or category before the insertion point. insertBefore takes precedence over insertAfter - if both are specified, the insertBefore parameter will apply.

When a rule or group of rules are inserted at an index which is part of either a section or a category, the category or section parameter can be used along with index to specify the insertion location of the rule(s). If an index is given along with a section or category, but the index is not in that section or category, you will receive an error.

If no index is specified, rules will be inserted after the end of the access policy. If a category or section is specified but no index is specified, rules will be inserted at the end of the category or section.

In any given POST all of the rules will be inserted at a single point. You cannot specify multiple insertion locations in a POST request.


Note

Rule order affects how orders are parsed by the Firepower Management Center.

Response Structure


Note

The REST API will serve only 25 results per page. This can be increased up to 1000 using the limit query parameter.

The response structure can be:

  • LOCATION – Newly created resource ID; for POST only—holds the new resource ID (as a URI representation).

  • CONTENT-TYPE – Media type describing the response message body; describes the representation and syntax of the response message body.

  • Each response includes an HTTP status or error code. Available codes fall into these categories:

  • 20x - A two-hundred series code indicates successful operation, including:

  • 200 OK
    – Standard response for successful requests.
  • 201 Created
    – Request completed; new resource created.
  • 202 Accepted
    – Request accepted, but processing not complete.
  • 204 No Content
    – Server successfully processed request; no content is being returned.

  • 4xx - A four-hundred series code indicates a client-side error, including:

  • 400 Bad Request
    – Invalid query parameters, including unrecognized parameters, missing parameters, or invalid values.

    This can indicate that the object was edited or deleted via REST API such that the corresponding policy is invalidated.

  • 404 Not Found
    – The provided URL does not match an existing resource. For example, an HTTP DELETE may fail because the resource is unavailable.
  • 405 Method not Allowed
    – An HTTP request was presented that is not allowed on the resource; for example, a POST on a read-only resource.
  • 422 Unprocessable Entity
    – The payload is too large. This will occur when you send a payload greater than 2048000 bytes.

    – The payload contains an unprocessable or unreadable entity such as a invalid attribut name or incorrect JSON syntax.

  • 429 Too Many Requests
    – Too many requests were sent to the API. This error will occur if you send more than 120 requests per minute.

    – Too many concurrent requests. The system cannot accept more than 10 parallel requests from all clients.

    – Too many write operations per server. The API will only allow one PUT, POST, or DELETE request per user on a server at a time.

  • 5xx - A five-hundred series code indicates a server-side error.

In the case of an error, in addition to the error code, the return response may include an error object containing more details about the error. The JSON error/warning response schema is as follows: 

 {
 "error": {
 "category": "FRAMEWORK",
 "messages": [
 {
 "description": "Action is mandatory to be specified." 
}
 ],
"severity": "ERROR"
}
}

where the object properties are:

Table 1. Object Properties

Property

Type

Description

messages

List of Dictionaries

List of error or warning messages

code

String

Error/Warning/Info code

details

String

Detailed message corresponding to Error/Warning/Info

Rate Limiting

The Firepower Management Center REST API implements rate limiting to reduce network load.

The API will accept no more than 120 messages per minute from an individual IP address. It will only allow 10 simultaneous connections per IP address. These are not configurable parameters.

If a client exceeds these limits, the API will give an HTTP 429 error.

Payload Limiting

The API cannot accept a message with a payload greater than 2048000 bytes. This applies to both the REST API and to API Explorer. This is not a configurable parameter.

If a message exceeds this limit, the API will give an HTTP 422 error.

Audit Services

GET auditrecords

Request Type: GET

Description: Retrieves audit records.

URL: /api/fmc_config/v1/domain/{domain_UUID}/audit/auditrecords

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/audit/auditrecords/{objectID}

Permissions: System > Monitoring > Audit

Parameters available for filtering: username, subsystem, source, starttime, endtime

Deployment Services

GET deployabledevices

Request Type: GET

Description: Retrieves list of all devices with configuration changes, ready to be deployed.

URL: /api/fmc_config/v1/domain/{domain_UUID}/deployment/deployabledevices

Permissions: Deploy Configuration to Devices

Parameters available for filtering: name

POST deploymentrequests

Request Type: POST

Description: Creates a request for deploying configuration changes to the specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/deployment/deploymentrequests/{object_UUID}

Permissions: Deploy Configuration to Devices

Device Group Services

DELETE devicegrouprecords

Request Type: DELETE

Description: Deletes a device group with the specified object ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devicegroups/devicegrouprecords/{object_UUID}

Permissions: Devices > Device Management > Modify Devices

PUT devicegrouprecords

Request Type: PUT

Description: Modifies a device group with the specified object ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devicegroups/devicegrouprecords/{object_UUID}

Permissions: Devices > Device Management > Modify Devices

POST devicegrouprecords

Request Type: POST

Description: Creates a device group with the specified object ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devicegroups/devicegrouprecords

Permissions: Devices > Device Management > Modify Devices

GET devicegrouprecords

Request Type: GET

Description: Retrieves the device group associated with the specified ID. If no ID is specified, retrieves list of all device groups.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devicegroups/devicegrouprecords

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/devicegroups/devicegrouprecords/{object_UUID}

Permissions: Devices > Device Management > View Devices

Device HA Pair Services

DELETE ftddevicehapair

Request Type: DELETE

Description: Deletes a device high availability pair with the specified object ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devicehapairs/ftddevicehapairs/{object_UUID}

Permissions: Devices > Device Management > Modify Devices

Note

Run the configure high-availability disable command to remove the failover configurations from FTD devices.

PUT ftddevicehapair

Request Type: PUT

Description: Sets any one of the following actions for the Firepower Threat Defense high availability device:

  • Sets the failover trigger criteria for the device

  • Switches states within the device

  • Breaks or force-breaks the device

URL: /api/fmc_config/v1/domain/{domain_UUID}/devicehapairs/ftddevicehapairs/{ha_container_UUID}

Permissions: Devices > Device Management > Modify Devices

POST ftddevicehapairs

Request Type: POST

Description: Creates a high availability device pair with the specified primary and secondary object IDs. Do not perform the POST operation for more than one high availability pair at a time. Ensure that the current POST operation is completed successfully before proceeding to the next POST operation.


Note
Typically, the first POST operation responds within 60 seconds. Cisco recommends that you perform subsequent POST operations at least 120 seconds after the first POST operation was initiated. The response of the POST operation includes a task object, with a task ID and task status. You can monitor the completion of the task by performing a GET operation on the task object with its task ID. For more information, see GET taskstatuses.

URL:/api/fmc_config/v1/domain/{domain_UUID}/devicehapairs/ftddevicehapairs

Permissions: Devices > Device Management > Modify Devices

GET ftddevicehapairs

Request Type: GET

Description: Retrieves the details associated with the specified high availability container ID. If no ID is specified, retrieves a list of all high availability container objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devicehapairs/ftddevicehapairs

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/devicehapairs/ftddevicehapairs/{ha_container_UUID}

Permissions: Devices > Device Management > Modify Devices

Device Services

POST copyconfigrequests

Request Type: POST

Description: Copies device configuration to the specified Firepower Threat Defense device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/copyconfigrequests

Permissions: Devices > Device Management > Modify Devices

DELETE devicerecords

Request Type: DELETE

Description: Unregisters the specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{object_UUID}

Permissions: Devices > Device Management > Modify Devices

PUT devicerecords

Request Type: PUT

Description: Modifies the device record associated with the specified ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{object_UUID}

Permissions: Devices > Device Management > Modify Devices

POST devicerecords

Request Type: POST

Description: Registers the specified device to the Firepower Managemenr Center.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords

Permissions: Devices > Device Management > Modify Devices

GET devicerecords

Request Type: GET

Description: Retrieves device information. If a device ID is specified, the information for the specificed device is retrieved. If no ID is specified, retrieves information for all devices.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{object_UUID}

Permissions: Devices > Device Management

Parameters available for filtering: hostName

PUT fpphysicalinterfaces

Request Type: PUT

Description: Modifies a physical interface on the specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{containerUUID}/fpphysicalinterfaces/{object_UUID}

Permissions: Devices > Device Management > Modify Device

GET fpphysicalinterfaces

Request Type: GET

Description: Retrieves information on the physical interface associated with the specified NGIPS device ID and interface ID. If no ID is specified, retrieves list of all physical interfaces associated with the specified NGIPS device ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/fpphysicalinterfaces

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/fpphysicalinterfaces/{object_UUID}

Permissions: Devices > Device Management

Parameters available for filtering: name

DELETE fplogicalinterfaces

Request Type: DELETE

Description: Deletes logical interfaces on the specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{containerUUID}/ fplogicalinterfaces/{object_UUID}

Permissions: Devices > Device Management > Modify Device

PUT fplogicalinterfaces

Request Type: PUT

Description: Modifies a logical interface on the specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/fplogicalinterfaces/{object_UUID}

Permissions: Devices > Device Management > Modify Device

POST fplogicalinterfaces

Request Type: POST

Description: Creates logical interfaces on the specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/fplogicalinterfaces

Permissions: Devices > Device Management > Modify Device

GET fplogicalinterfaces

Request Type: GET

Description: Retrieves the logical interface associated with the specified NGIPS device ID and interface ID. If no ID is specified, retrieves list of all logical interfaces associated with the specified NGIPS device ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/fplogicalinterfaces

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/fplogicalinterfaces/{obect_UUID}

Permissions: Devices > Device Management

Parameters available for filtering: name

DELETE inlinesets

Request Type: DELETE

Description: Deletes inline sets on the specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{containerUUID}/inlinesets/{object_UUID}

Permissions: Devices > Device Management > Modify Device

PUT inlinesets

Request Type: PUT

Description: Modifies an inline set on the specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/inlinesets/{object_UUID}

Permissions: Devices > Device Management > Modify Device

POST inlinesets

Request Type: POST

Description: Creates inline sets on the specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/inlinesets

Permissions: Devices > Device Management > Modify Device

GET inlinesets

Request Type: GET

Description: Retrieves information on the inline set associated with the specified NGIPS device ID and inline set ID. If no inline set ID is specified, retrieves list of all inline sets associated with the specified NGIPS device ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/inlinesets

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/inlinesets/{object_UUID}

Permissions: Devices > Device Management

Parameters available for filtering: name

GET staticroutes

Request Type: GET

Description: Retrieves list of all IPv4 and IPv6 Static Routes associated with the specified device.

URL: /api/fmc_config/v1/domain/{domainUUID}/devices/devicerecords/{containerUUID}/routing/staticroutes

URL for GET ID:: /api/fmc_config/v1/domain/{domainUUID}/devices/devicerecords/{containerUUID}/routing/staticroutes/{object_UUID}

Permissions: Devices > Devices Management

DELETE ipv4staticroutes

Request Type: DELETE

Description: Deletes the IPv4 Static Route associated with the specified ID.

URL: /api/fmc_config/v1/domain/{domainUUID}/devices/devicerecords/{containerUUID}/routing/ipv4staticroutes/{object_UUID}

Permissions: Devices > Devices Management > Modify Devices

PUT ipv4staticroutes

Request Type: PUT

Description: Modifies the IPv4 Static Route associated with the specified ID.

URL: /api/fmc_config/v1/domain/{domainUUID}/devices/devicerecords/{containerUUID}/routing/ipv4staticroutes/{object_UUID}

Permissions: Devices > Devices Management > Modify Devices

POST ipv4staticroutes

Request Type: POST

Description: Creates an IPv4 Static Route.

URL: /api/fmc_config/v1/domain/{domainUUID}/devices/devicerecords/{containerUUID}/routing/ipv4staticroutes

Permissions: Devices > Device Management > Modify Devices

GET ipv4staticroutes

Request Type: GET

Description: Retrieves the IPv4 Static Route associated with the specified ID. If no ID is specified, retrieves list of all IPv4 Static Routes.

URL: /api/fmc_config/v1/domain/{domainUUID}/devices/devicerecords/{containerUUID}/routing/ipv4staticroutes

URL for GET ID:: /api/fmc_config/v1/domain/{domainUUID}/devices/devicerecords/{containerUUID}/routing/ipv4staticroutes/{object_UUID}

Permissions: Devices > Devices Management

DELETE ipv6staticroutes

Request Type: DELETE

Description: Deletes the IPv6 Static Route associated with the specified ID.

URL: /api/fmc_config/v1/domain/{domainUUID}/devices/devicerecords/{containerUUID}/routing/ipv6staticroutes/{object_UUID}

Permissions: Devices > Device Management > Modify Devices

PUT ipv6staticroutes

Request Type: PUT

Description: Modifies the IPv6 Static Route associated with the specified ID.

URL: /api/fmc_config/v1/domain/{domainUUID}/devices/devicerecords/{containerUUID}/routing/ipv6staticroutes/{object_UUID}

Permissions: Devices > Device Management > Modify Devices

POST ipv6staticroutes

Request Type: POST

Description: Creates an IPv6 Static Route.

URL: /api/fmc_config/v1/domain/{domainUUID}/devices/devicerecords/{containerUUID}/routing/ipv6staticroutes

Permissions: Devices > Device Management > Modify Devices

GET ipv6staticroutes

Request Type: GET

Description: Retrieves the IPv6 Static Route associated with the specified ID. If no ID is specified, retrieves list of all IPv6 Static Routes.

URL: /api/fmc_config/v1/domain/{domainUUID}/devices/devicerecords/{containerUUID}/routing/ipv6staticroutes

URL for GET ID: /api/fmc_config/v1/domain/{domainUUID}/devices/devicerecords/{containerUUID}/routing/ipv6staticroutes/{object_UUID}

Permissions: Devices > Device Management

DELETE virtualswitches

Request Type: DELETE

Description: Deletes a virtual switch on the specified device.

This method is only available on a Firepower 1010 device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{containerUUID}/virtualswitches/{object_UUID}

Permissions: Devices > Device Management > Modify Device

PUT virtualswitches

Request Type: PUT

Description: Modifies a virtual switch on the specified device.

This method is only available on a Firepower 1010 device.

URL: /api/fmc_config/v1/domain/{UUID}/devices/devicerecords/{containerUUID}/virtualswitches/{object_UUID}

Permissions: Devices > Device Management > Modify Device

POST virtualswitches

Request Type: POST

Description: Creates a virtual switch on the specified device.

This method is only available on a Firepower 1010 device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/virtualswitches

Permissions: Devices > Device Management > Modify Device

GET virtualswitches

Request Type: GET

Description: Retrieves virtual switch associated with the specified NGIPS device ID and virtual switch ID. If no virtual switch ID is specified, retrieves list of all virtual switches associated with the specified NGIPS device ID.

This method is only available on a Firepower 1010 device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{containerUUID}/ virtualswitches

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{containerUUID}/ virtualswitches/{object_UUID}

Permissions: Devices > Device Management

Parameters available for filtering: name

PUT fpphysicalinterfaces

Request Type: PUT

Description: Modifies a physical interface on the specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{containerUUID}/fpphysicalinterfaces/{object_UUID}

Permissions: Devices > Device Management > Modify Device

GET fpphysicalinterfaces

Request Type: GET

Description: Retrieves information on the physical interface associated with the specified NGIPS device ID and interface ID. If no ID is specified, retrieves list of all physical interfaces associated with the specified NGIPS device ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/fpphysicalinterfaces

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/fpphysicalinterfaces/{object_UUID}

Permissions: Devices > Device Management

Parameters available for filtering: name

PUT physicalinterfaces

Request Type: PUT

Description: Modifies physical interfaces on a specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/ physicalinterfaces

Permissions: Devices > Device Management > Modify Device

GET physicalinterfaces

Request Type: GET

Description: Retrieves the physical interface associated with the specified NGFW device ID and interface ID. If no interface ID is specified, retrieves list of all physical interfaces associated with the specified NGFW device ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/physicalinterfaces

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/physicalinterfaces/{object_UUID}

Permissions: Devices > Device Management

GET bridgegroupinterfaces

Request Type: GET

Description: Retrieves the bridge group interface associated with the specified NGFW device ID and interface ID. If no interface ID is specified, retrieves list of all bridge group interfaces associated with the specified NGFW device ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/bridgegroupinterfaces

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/bridgegroupinterfaces/{object_UUID}

Permissions: Devices > Device Management

POST bridgegroupinterfaces

Request Type: POST

Description: Creates bridge group interfaces associated with the specified NGFW device ID and interface ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/bridgegroupinterfaces

Permissions: Devices > Device Management > Modify Device

PUT bridgegroupinterfaces

Request Type: PUT

Description: Modifies a bridge group interface on the specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/bridgegroupinterfaces

Permissions: Devices > Device Management > Modify Device

DELETE bridgegroupinterfaces

Request Type: DELETE

Description: Deletes a bridge group interface associated with the specified NGFW device ID and interface ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/bridgegroupinterfaces

Permissions: Devices > Device Management > Modify Device

GET redundantinterfaces

Request Type: GET

Description: Retrieves the redundant interface associated with the specified NGFW device ID and interface ID. If no interface ID is specified, retrieves list of all redundant interfaces associated with the specified NGFW device ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/redundantinterfaces

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/redundantinterfaces/{object_UUID}

Permissions: Devices > Device Management

POST redundantinterfaces

Request Type: POST

Description: Creates redundant interfaces on a specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/redundantinterfaces

Permissions: Devices > Device Management

PUT redundantinterfaces

Request Type: PUT

Description: Modifies redundant interfaces on a specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/redundantinterfaces

Permissions: Devices > Device Management > Modify Device

DELETE redundantinterfaces

Request Type: DELETE

Description: Removes redundant interfaces on a specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/redundantinterfaces

Permissions: Devices > Device Management

GET etherchannelinterfaces

Request Type: GET

Description: Retrieves the ethernet channel interface associated with the specified NGFW device ID and interface ID. If no ID is specified, retrieves list of all ethernet channel interfaces associated with the specified NGFW device ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/etherchannelinterfaces

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/etherchannelinterfaces/{object_UUID}

Permissions: Devices > Device Management

Parameters available for filtering:

POST etherchannelinterfaces

Request Type: POST

Description: Creates ethernet channel interfaces on the specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/ethernetchannelinterfaces

Permissions: Devices > Device Management > Modify Device

PUT etherchannelinterfaces

Request Type: PUT

Description: Modifies an ethernet channel interfaces on the specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{containerUUID}/ethernetchannelinterfaces/

Permissions: Devices > Device Management > Modify Device

DELETE etherchannelinterfaces

Request Type: DELETE

Description: Removes ethernet channel interfaces from a specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/ethernetchannelinterfaces

Permissions: Devices > Device Management

GET subinterfaces

Request Type: GET

Description: Retrieves the sub-interface associated with the specified NGFW device ID and interface ID. If no interface ID is specified, retrieves list of all sub-interfaces associated with the specified NGFW device ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/subinterfaces

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/subinterfaces/{object_UUID}

Permissions: Devices > Device Management

POST subinterfaces

Request Type: POST

Description: Creates sub interfaces on a specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/subinterfaces

Permissions: Devices > Device Management

PUT subinterfaces

Request Type: PUT

Description: Modifies a sub interface on the specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/subinterfaces/

Permissions: Devices > Device Management > Modify Device

DELETE subinterfaces

Request Type: DELETE

Description: Deletes sub interfaces on a specified device.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/devicerecords/{container_UUID}/subinterfaces

Permissions: Devices > Device Management

GET fpinterfacestatistics

Request Type: GET

Description: Retrieves list of statistics for all interfaces associated with the specified NGIPS device ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/devices/ devicerecords/{container_UUID}/fpinterfacestatistics

Permissions: Devices > Device Management

Parameters available for filtering: name

Intelligence Services

POST collections

Request Type: POST

Description: Adds a collections from a TAXII source.

URL: /api/fmc_tid/v1/domain/{domain_UUID}/taxiiconfig/collections

Permissions: Intelligence

POST discoveryinfo

Request Type: POST

Description: Adds information about TAXII collections available from a source.

URL: /api/fmc_tid/v1/domain/{domain_UUID}/taxiiconfig/discoveryinfo

Permissions: Intelligence

GET element

Request Type: GET

Description: Retrieves the intelligence-enabled sensor associated with the specified ID. If no ID is specified, retrieves list of all intelligence-enabled sensors.

URL: /api/fmc_tid/v1/domain/{domain_UUID}/tid/element

URL for GET by ID: /api/fmc_tid/v1/domain/{domain_UUID}/tid/element/{object_UUID}

Permissions: Intelligence

DELETE incident

Request Type: DELETE

Description: Deletes an incident.

URL: /api/fmc_tid/v1/domain/{domain_UUID}/taxiiconfig/incident/{object_UUID}

Permissions: Intelligence

PUT incident

Request Type: PUT

Description: Modifies an intelligence incident with the specified object ID.

URL: /api/fmc_tid/v1/domain/{domain_UUID}/tid/incident/{object_UUID}

Permissions: Intelligence

GET incident

Request Type: GET

Description: Retrieves the intelligence incident associated with the specified ID. If no ID is specified, retrieves list of all intelligence incidents. By default 25 results will be displayed on each page, this can be increased up to 40 using the limit parameter.

URL: /api/fmc_tid/v1/domain/{domain_UUID}/tid/incident

URL for GET by ID: /api/fmc_tid/v1/domain/{domain_UUID}/tid/incident/{object_UUID}

Permissions: Intelligence

PUT indicator

Request Type: PUT

Description: Modifies an indicator with the specified object ID.

URL: /api/fmc_tid/v1/domain/{domain_UUID}/tid/indicator/{object_UUID}

Permissions: Intelligence

GET indicator

Request Type: GET

Description: Retrieves the indicator associated with the specified ID. If no ID is specified, retrieves list of all indicators. By default 25 results will be displayed on each page, this can be increased up to 40 using the limit parameter.

URL: /api/fmc_tid/v1/domain/{domain_UUID}/tid/indicator

URL for GET by ID: /api/fmc_tid/v1/domain/{domain_UUID}/tid/indicator/{object_UUID}

Permissions: Intelligence

PUT observable

Request Type: PUT

Description: Modifies an observable with the specified object ID.

URL: /api/fmc_tid/v1/domain/{domain_UUID}/tid/observable/{object_UUID}

Permissions: Intelligence

GET observable

Request Type: GET

Description: Retrieves the observable associated with the specified ID. If no ID is specified, retrieves list of all observables. By default 25 results will be displayed on each page, this can be increased up to 40 using the limit parameter.

URL: /api/fmc_tid/v1/domain/{domain_UUID}/tid/observable

URL for GET by ID: /api/fmc_tid/v1/domain/{domain_UUID}/tid/observable/{object_UUID}

Permissions: Intelligence

PUT settings

Request Type: PUT

Description: Activates or deactivates an intelligence setting.

URL: /api/fmc_tid/v1/domain/{domain_UUID}/tid/settings/{value}

Permissions: Intelligence

GET settings

Request Type: GET

Description: Retrieves the on/off settings for the specified value. If no ID is specified, retrieves list of all TID settings.

URL: /api/fmc_tid/v1/domain/{domain_UUID}/tid/settings

URL for GET by value: /api/fmc_tid/v1/domain/{domain_UUID}/tid/settings/{value}

Permissions: Intelligence

DELETE source

Request Type: DELETE

Description: Deletes an intelligence source from the device.

URL: /api/fmc_tid/v1/domain/{domain_UUID}/taxiiconfig/source/{object_UUID}

Permissions: Intelligence

PUT source

Request Type: PUT

Description: Modifies an intelligence source with the specified object ID.

URL: /api/fmc_tid/v1/domain/{domain_UUID}/tid/source/{object_UUID}

Permissions: Intelligence

POST source

Request Type: POST

Description: Adds a source for intelligence information.

URL: /api/fmc_tid/v1/domain/{domain_UUID}/tid/source

Permissions: Intelligence

GET source

Request Type: GET

Description: Retrieves the intelligence source associated with the specified ID. If no ID is specified, retrieves list of all intelligence sources. By default 25 results will be displayed on each page, this can be increased up to 40 using the limit parameter.

URL: /api/fmc_tid/v1/domain/{domain_UUID}/tid/source

URL for GET by ID: /api/fmc_tid/v1/domain/{domain_UUID}/tid/source/{object_UUID}

Permissions: Intelligence

Object Services

GET anyprotocolportobjects

Request Type: GET

Description: Retrieves the any protocol port object associated with the specified ID. If no ID is specified, retrieves list of all protocol port objects with the protocol set to All.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/anyprotocolportobjects

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/anyprotocolportobjects/{object_UUID}

Permissions: Object Manager

GET applicationcategories

Request Type: GET

Description: Retrieves the application category object associated with the specified ID. If no ID is specified, retrieves list of all application category objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/applicationcategories

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/applicationcategories/{object_UUID}

Permissions: Object Manager

GET applicationfilters

Request Type: GET

Description: Retrieves the application filter object associated with the specified ID. If no ID is specified, retrieves list of all application filter objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/applicationfilters

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/applicationfilters/{object_UUID}

Permissions: Object Manager

GET applicationproductivities

Request Type: GET

Description: Retrieves the application productivity object associated with the specified ID. If no ID is specified, retrieves list of all application productivity objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/applicationproductivities

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/applicationproductivities/{object_UUID}

Permissions: Object Manager

GET applicationrisks

Request Type: GET

Description: Retrieves the application risk object associated with the specified ID. If no ID is specified, retrieves list of all application risk objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/applicationrisks

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/applicationrisks/{object_UUID}

Permissions: Object Manager

GET applications

Request Type: GET

Description: Retrieves the application object associated with the specified ID. If no ID is specified, retrieves list of all application objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/applications

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/applications/{object_UUID}

Permissions: Object Manager

GET applicationtags

Request Type: GET

Description: Retrieves the application tag object associated with the specified ID. If no ID is specified, retrieves list of all application tag objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/applicationtags

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/applicationtags/{object_UUID}

Permissions: Object Manager

GET applicationtypes

Request Type: GET

Description: Retrieves the application type object associated with the specified ID. If no ID is specified, retrieves list of all application type objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/applicationtypes

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/applicationtypes/{object_UUID}

Permissions: Object Manager

GET continents

Request Type: GET

Description: Retrieves the continent object associated with the specified ID. If no ID is specified, retrieves list of all continent objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/continents

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/continents/{object_UUID}

Permissions: Object Manager

GET countries

Request Type: GET

Description: Retrieves the country object associated with the specified ID. If no ID is specified, retrieves list of all country objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/countries

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/countries/{object_UUID}

Permissions: Object Manager

GET endpointdevicetypes

Request Type: GET

Description: Retrieves the endpoint device type object associated with the specified ID. If no ID is specified, retrieves list of all endpoint device type objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/endpointdevicetypes

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/endpointdevicetypes/{object_UUID}

Permissions: Object Manager

GET geolocation

Request Type: GET

Description: Retrieves the geolocation object associated with the specified ID. If no ID is specified, retrieves list of all geolocation objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/geolocations

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/geolocations/{object_UUID}

Permissions: Object Manager

DELETE hosts

Request Type: DELETE

Description: Deletes the specified host object.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/hosts/{object_UUID}

Permissions: Object Manager > Modify Object Manager

PUT hosts

Request Type: PUT

Description: Modifies a host object.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/hosts/{object_UUID}

Permissions: Object Manager > Modify Object Manager

POST hosts

Request Type: POST

Description: Creates or overrides the host objects with the specified parameters.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/hosts

URL for Bulk Post: /api/fmc_config/v1/domain/{domain_UUID}/object/hosts?bulk=true

Permissions: Object Manager > Modify Object Manager

GET hosts

Request Type: GET

Description: Retrieves the host object associated with the specified ID. If no ID is specified, retrieves list of all host objects.

URL for listing: /api/fmc_config/v1/domain/{domain_UUID}/object/hosts

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/hosts/{object_UUID}

Permissions: Object Manager

DELETE icmpv4objects

Request Type: DELETE

Description: Deletes the specified ICMPv4 port.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/icmpv4objects/{object_UUID}

Permissions: Object Manager > Modify Object Manager

PUT icmpv4objects

Request Type: PUT

Description: Modifies ICMPv4 port objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/icmpv4objects/{object_UUID}

Permissions: Object Manager > Modify Object Manager

POST icmpv4objects

Request Type: POST

Description: Creates or overrides the ICMPv4 port objects with the specified parameters.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/icmpv4objects

Permissions: Object Manager > Modify Object Manager

GET icmpv4objects

Request Type: GET

Description: Retrieves the ICMPv4 object associated with the specified ID. If no ID, retrieves list of all ICMPv4 objects.

URL for listing: /api/fmc_config/v1/domain/{domain_UUID}/object/icmpv4objects

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/icmpv4objects/{object_UUID}

Permissions: Object Manager

DELETE icmpv6objects

Request Type: DELETE

Description: Deletes the specified ICMPv6 port objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/icmpv6objects/{object_UUID}

Permissions: Object Manager > Modify Object Manager

PUT icmpv6objects

Request Type: PUT

Description: Modifies ICMPv6 port objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/icmpv6objects/{object_UUID}

Permissions: Object Manager > Modify Object Manager

POST icmpv6objects

Request Type: POST

Description: Creates or overrides the ICMPv6 port objects with the specified parameters.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/icmpv6objects

Permissions: Object Manager > Modify Object Manager

GET icmpv6objects

Request Type: GET

Description: Retrieves the ICMPv6 object associated with the specified ID. If no ID is specified, retrieves list of all ICMPv6 objects.

URL for listing: /api/fmc_config/v1/domain/{domain_UUID}/object/icmpv6objects

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/icmpv6objects/{object_UUID}

URL to list all overrides on a particular object: /api/fmc_config/v1/domain/{domain_UUID}/object/icmp6objects/{icmpv6object_UUID}/overrides

Permissions: Object Manager

GET isesecuritygrouptags

Request Type: GET

Description: Retrieves the ISE security group tag object with the specified ID. If no ID is specified, retrieves list of all ISE security group tag objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/isesecuritygrouptags

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/isesecuritygrouptags/{object_UUID}

Permissions: Object Manager

GET networkaddresses

Request Type: GET

Description: Retrieves list of all network and host objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/networkaddresses

Permissions: Object Manager

DELETE networkgroups

Request Type: DELETE

Description: Deletes the specified Network Group.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/networkgroups/{object_UUID}

URL to DELETE overrides on a particular object: /api/fmc_config/v1/domain/{domain_UUID}/object/networkgroups/{object_UUID}?overrideTargetId={target_UUID}

Permissions: Object Manager > Modify Object Manager

PUT networkgroups

Request Type: PUT

Description: Modifies a Network Group.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/networkgroups/{object_UUID}

Permissions: Object Manager > Modify Object Manager

POST networkgroups

Request Type: POST

Description: Creates or overrides the network group with the specified parameters.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/networkgroups

Permissions: Object Manager > Modify Object Manager

GET networkgroups

Request Type: GET

Description: Retrieves the network group object associated with the specified ID. If no ID is specified, retrieves list of all network group objects.

URL for listing: /api/fmc_config/v1/domain/{domain_UUID}/object/networkgroups

URL for all the overrides on a particular domain or device: /api/fmc_config/v1/domain/{domain_UUID}/object/networkgroups?overrideTargetId={target_UUID}

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/networkgroups/{object_UUID}

Permissions: Object Manager

DELETE networks

Request Type: DELETE

Description: Deletes the specified network objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/networks/{object_UUID}

URL to DELETE overrides on a particular object: /api/fmc_config/v1/domain/{domain_UUID}/object/networks/{object_UUID}?overrideTargetId={target_UUID}

Permissions: Object Manager > Modify Object Manager

PUT networks

Request Type: PUT

Description: Modifies network objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/networks/{object_UUID}

Permissions: Object Manager > Modify Object Manager

POST networks

Request Type: POST

Description: Creates or overrides the network objects with the specified parameters.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/networks

URL for Bulk Post: /api/fmc_config/v1/domain/{domain_UUID}/object/networks?bulk=true

Permissions: Object Manager > Modify Object Manager

GET networks

Request Type: GET

Description: Retrieves the network objects associated with the specified ID. If no ID is specified, retrieves list of all network objects.

URL for listing: /api/fmc_config/v1/domain/{domain_UUID}/object/networks

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/networks/{object_UUID}

Permissions: Object Manager

DELETE portobjectgroups

Request Type: DELETE

Description: Deletes the specified port object groups.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/portobjectgroups/{object_UUID}

URL to DELETE overrides on a particular object: /api/fmc_config/v1/domain/{domain_UUID}/object/portobjectgroups/{object_UUID}?overrideTargetId={target_UUID}

Permissions: Object Manager > Modify Object Manager

PUT portobjectgroups

Request Type: PUT

Description: Modifies port object groups.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/portobjectgroups/{object_UUID}

Permissions: Object Manager > Modify Object Manager

POST portobjectgroups

Request Type: POST

Description: Creates or overrides the port object groups with the specified parameters.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/portobjectgroups

Permissions: Object Manager > Modify Object Manager

GET portobjectgroups

Request Type: GET

Description: Retrieves the port object group object associated with the specified ID. If no ID is specified, retrieves list of all port object group objects.

URL for listing: /api/fmc_config/v1/domain/{domain_UUID}/object/portobjectgroups

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/portobjectgroups/{object_UUID}

URL to list all overrides on a particular object: /api/fmc_config/v1/domain/{domain_UUID}/object/portobjectgroups/{portobjectgroup_UUID}/overrides

Permissions: Object Manager

GET ports

Request Type: GET

Description: Retrieves list of all port objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/ports

Permissions: Object Manager

DELETE protocolportobjects

Request Type: DELETE

Description: Deletes the specified protocol port objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/protocolportobjects/{object_UUID}

URL to DELETE overrides on a particular object: /api/fmc_config/v1/domain/{domain_UUID}/object/protocolportobjects/{object_UUID}?overrideTargetId={target_UUID}

Permissions: Object Manager > Modify Object Manager

PUT protocolportobjects

Request Type: PUT

Description: Modifies protocol port objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/protocolportobjects/{object_UUID}

Permissions: Object Manager > Modify Object Manager

POST protocolportobjects

Request Type: POST

Description: Creates or overrides the protocol port objects with the specified parameters.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/protocolportobjects

Permissions: Object Manager > Modify Object Manager

GET protocolportobjects

Request Type: GET

Description: Retrieves the protocol port object associated with the specified ID. If no ID is specified, retrieves list of all protocol port objects.

URL for listing:: /api/fmc_config/v1/domain/{domain_UUID}/object/protocolportobjects

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/protocolportobjects/{object_UUID}

Permissions: Object Manager

DELETE ranges

Request Type: DELETE

Description: Deletes the specified address range.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/ranges/{object_UUID}

URL to DELETE overrides on a particular object: /api/fmc_config/v1/domain/{domain_UUID}/object/ranges/{object_UUID}?overrideTargetId={target_UUID}

Permissions: Object Manager > Modify Object Manager

PUT ranges

Request Type: PUT

Description: Modifies an address range.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/ranges/{object_UUID}

Permissions: Object Manager > Modify Object Manager

POST ranges

Request Type: POST

Description: Creates or overrides an address range with the specified parameters.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/ranges

Permissions: Object Manager > Modify Object Manager

GET ranges

Request Type: GET

Description: Retrieves the address range object associated with the specified ID. If no ID is specified, retrieves list of all address range objects.

URL for listing: /api/fmc_config/v1/domain/{domain_UUID}/object/ranges

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/ranges/{object_UUID}

Permissions: Object Manager

GET realms

Request Type: GET

Description: Retrieves the realm object associated with the specified ID. If no ID is specified, retrieves list of all realm objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/realms

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/realms/{object_UUID}

Permissions: Object Manager

GET realmusergroups

Request Type: GET

Description: Retrieves the realm user group object associated with the specified ID. If no ID is specified, retrieves list of all realm user group objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/realmusergroups

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/realmusergroups/{object_UUID}

Permissions: Object Manager

Parameters available for filtering: realmUuid


Note

This is a required parameter.

GET realmusers

Request Type: GET

Description: Retrieves the realm user object associated with the specified ID. If no ID is specified, retrieves list of all realm user objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/realmusers

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/realmusers/{object_UUID}

Permissions: Object Manager

Parameters available for filtering: realmUuid


Note

This is a required parameter.

GET securitygrouptags

Request Type: GET

Description: Retrieves the custom security group tag object associated with the specified ID. If no ID is specified, retrieves list of all custom security group tag objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/securitygrouptags

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/securitygrouptags/{object_UUID}

Permissions: Object Manager

Parameters available for filtering: name

DELETE securityzones

Request Type: DELETE

Description: Deletes the specified securityzone objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/securityzones/{object_UUID}

Permissions: Object Manager>Modify Object Manager

PUT securityzones

Request Type: PUT

Description: Modifies a securityzone object.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/securityzones/{object_UUID}

Permissions: Object Manager>Modify Object Manager

POST securityzones

Request Type: POST

Description: Creates or overrides the securityzone objects with the specified parameters.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/securityzones

Permissions: Object Manager > Modify Object Manager

GET securityzones

Request Type: GET

Description: Retrieves the security zone objects associated with the specified ID. If no ID is specified, retrieves list of all security zone objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/securityzones

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/securityzones/{object_UUID}

Permissions: Object Manager

Parameters available for filtering: name

GET siurlfeeds

Request Type: GET

Description: Retrieves the Security Intelligence url feed object associated with the specified ID. If no ID is specified, retrieves list of all Security Intelligence url feed objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/siurlfeeds

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/siurlfeeds/{object_UUID}

Permissions: Object Manager

GET siurllists

Request Type: GET

Description: Retrieves the Security Intelligence url list object associated with the specified ID. If no ID is specified, retrieves list of all Security Intelligence url list objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/siurllists

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/siurllists/{object_UUID}

Permissions: Object Manager

DELETE slamonitors

Request Type: DELETE

Description: Deletes the sla monitor object associated with the specified ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/slamonitors/{object_UUID}

Permissions: Object Manager > Modify Object Manager

PUT slamonitors

Request Type: PUT

Description: Modifies the sla monitor object associated with the specified ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/slamonitors/{object_UUID}

Permissions: Object Manager > Modify Object Manager

POST slamonitors

Request Type: POST

Description: Creates or overrides a SLA monitor with the specified parameters.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/slamonitors

Permissions: Object Manager > Modify Object Manager

GET slamonitors

Request Type: GET

Description: Retrieves the SLA Monitors associated with the specified ID. If no ID is specified, retrieves list of all SLA Monitors.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/slamonitors

URL by GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/slamonitors/{object_UUID}

Permissions: Object Manager

GET tunneltags

Request Type: GET

Description: Retrieves the tunnel tag object associated with the specified ID. If no ID is specified, retrieves list of all tunnel tag objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/tunneltags

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/tunneltags/{object_UUID}

Permissions: Object Manager

GET urlcategories

Request Type: GET

Description: Retrieves the url category object associated with the specified ID. If no ID is specified, retrieves list of all url category objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/urlcategories

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/urlcategories/{object_UUID}

Permissions: Object Manager

DELETE urlgroups

Request Type: DELETE

Description: Deletes the specified urlgroup objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/urlgroups/{object_UUID}

URL to DELETE overrides on a particular object: /api/fmc_config/v1/domain/{domain_UUID}/object/urlgroups/{object_UUID}?overrideTargetId={target_UUID}

Permissions: Object Manager > Modify Object Manager

PUT urlgroups

Request Type: PUT

Description: Modifies urlgroup objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/urlgroups/{object_UUID}

Permissions: Object Manager > Modify Object Manager

POST urlgroups

Request Type: POST

Description: Creates or overrides the urlgroup objects with the specified parameters.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/urlgroups

Permissions: Object Manager > Modify Object Manager

GET urlgroups

Request Type: GET

Description: Retrieves the url group objects associated with the specified ID. If no ID is specified, retrieves list of all url group objects.

URL for listing: /api/fmc_config/v1/domain/{domain_UUID}/object/urlgroups

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/urlgroups/{object_UUID}

Permissions: Object Manager > Modify Object Manager

DELETE urls

PUT urls

Request Type: PUT

Description: Modifies a URL.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/urls/{object_UUID}

Permissions: Object Manager

POST urls

Request Type: POST

Description: Creates or overrides the URLs with the specified parameters.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/urls

Permissions: Object Manager > Modify Object Manager

GET urls

Request Type: GET

Description: Retrieves the url objects associated with the specified ID. If no ID is specified, retrieves list of all url objects.

URL for listing: /api/fmc_config/v1/domain/{domain_UUID}/object/urls

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/urls/{object_UUID}

Permissions: Object Manager

GET variablesets

Request Type: GET

Description: Retrieves the variable set object associated with the specified ID. If no ID is specified, retrieves list of all variable set objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/variablesets

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/variablesets/{object_UUID}

Permissions: Object Manager

DELETE vlangrouptags

Request Type: DELETE

Description: Deletes the specified vlangrouptag objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/vlangrouptags/{object_UUID}

URL to DELETE overrides on a particular object: /api/fmc_config/v1/domain/{domain_UUID}/object/vlangrouptags/{object_UUID}?overrideTargetId={target_UUID}

Permissions: Object Manager > Modify Object Manager

PUT vlangrouptags

Request Type: PUT

Description: Modifies vlangrouptag objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/vlangrouptags/{object_UUID}

Permissions: Object Manager > Modify Object Manager

POST vlangrouptags

Request Type: POST

Description: Creates or overrides the VLAN group tags with the specified parameters.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/vlangrouptags

Permissions: Object Manager > Modify Object Managers

GET vlangrouptags

Request Type: GET

Description: Retrieves the vlan group tag objects associated with the specified ID. If no ID is specified, retrieves list of all vlan group tag objects.

URL for listing: /api/fmc_config/v1/domain/{domain_UUID}/object/vlangrouptags

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/vlangrouptags/{object_UUID}

Permissions: Object Manager > Modify Object Manager

DELETE vlantags

Request Type: DELETE

Description: Deletes the specified VLAN tag objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/vlantags/{object_UUID}

URL to DELETE overrides on a particular object: /api/fmc_config/v1/domain/{domain_UUID}/object/vlantags/{object_UUID}?overrideTargetId={target_UUID}

Permissions: Object Manager > Modify Object Manager

PUT vlantags

Request Type: PUT

Description: Modifies VLAN tag objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/vlantags/{object_UUID}

Permissions: Object Manager > Modify Object Manager

POST vlantags

Request Type: POST

Description: Creates or overrides the VLAN tags with the specified parameters.

URL: /api/fmc_config/v1/domain/{domain_UUID}/object/vlantags

Permissions: Object Manager > Modify Object Manager

GET vlantags

Request Type: GET

Description: Retrieves the vlantag objects associated with the specified ID. If no ID is specified, retrieves list of all vlantag objects.

URL for listing: /api/fmc_config/v1/domain/{domain_UUID}/object/vlantags

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/object/vlantags/{object_UUID}

Permissions: Object Manager

Policy Services

DELETE accesspolicies

Request Type: DELETE

Description: Deletes the access control policy with the specified ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/accesspolicies/{object_UUID}

Permissions: Policies>Access Control Policy>Modify Access Control Policy

PUT accesspolicies

Request Type: PUT

Description: Modifies an access control policy.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/accesspolicies/{object_UUID}

Permissions: Policies>Access Control Policy>Modify Access Control Policy

POST accesspolicies

Request Type: POST

Description: Creates an access control policy with the specified parameters.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/accesspolicies

Permissions: Policies>Access Control Policy>Modify Access Control Policy

GET accesspolicies

Request Type: GET

Description: Retrieves the access control policy associated with the specified ID. If no ID is specified, retrieves a list of all access control policies.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/accesspolicies

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/policy/accesspolicies/{object_UUID}

Permissions: Policies

DELETE accessrules

Request Type: DELETE

Description: Deletes an access control rule in the specified access control policy.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/accesspolicies/{container_UUID}/accessrules/{object_UUID}

Permissions: Policies>Access Control>Access Control Policy>Modify Access Control Policy

PUT accessrules

Request Type: PUT

Description: Modifies an access control rule in the specified access control policy.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/accesspolicies/{container_UUID}/accessrules/{object_UUID}

Permissions: Policies>Access Control>Access Control Policy>Modify Access Control Policy

POST accessrules

Request Type: POST

Description: Creates an access control rule in the specified access control policy.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/accesspolicies/{container_UUID}/accessrules

Permissions: Policies>Access Control>Access Control Policy>Modify Access Control Policy

GET accessrules

Request Type: GET

Description: Retrieves the access control rule associated with the specified policy ID and rule ID. If no rule ID is specified, retrieves list of all access rules associated with the specified policy ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/accesspolicies/{container_UUID}/accessrules

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/policy/accesspolicies/{container_UUID}/accessrules/{object_UUID}

Permissions: Policies>Access Control>Access Control Policy

PUT defaultactions

Request Type: PUT

Description: Modifies the default action associated with the specified access control policy ID and default action ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/accesspolicies/{container_UUID}/defaultactions/{object_UUID}

Permissions: Policies>Access Control>Access Control Policy>Modify Access Control Policy

GET defaultactions

Request Type: GET

Description: Retrieves the default action associated with the specified access control policy ID and default action ID. If no default action ID is specified, retrieves list of all default actions associated with the specified access control policy ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/accesspolicies/{container_UUID}/defaultactions

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/policy/accesspolicies/{container_UUID}/defaultactions/{object_UUID}

Permissions: Policies>Access Control>Access Control Policy

GET filepolicies

Request Type: GET

Description: Retrieves the file policy object associated with the specified ID. If no ID is specified, retrieves list of all file policy objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/filepolicies

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/policy/filepolicies/{object_UUID}

Permissions: Policies>Access Control>Malware & File Policy

DELETE ftdnatpolicies

Request Type: DELETE

Description: Deletes the Firepower Threat Defense NAT policy with the specified ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/ftdnatpolicies/{object_UUID}

Permissions: Devices>NAT>NAT List >Modify NAT policy

PUT ftdnatpolicies

Request Type: PUT

Description: Modifies an Firepower Threat Defense NAT policy with the specified ID.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/ftdnatpolicies/{object_UUID}

Permissions: Devices>NAT>NAT List >Modify NAT policy

POST ftdnatpolicies

Request Type: POST

Description: Creates a Firepower Threat Defense device NAT policy with the specified parameters.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/ftdnatpolicies

Permissions: Devices>NAT>NAT List >Modify NAT policy

GET ftdnatpolicies

Request Type: GET

Description: Retrieves the Firepower Threat Defense NAT policy associated with the specified ID. If no ID is specified, retrieves a list of all Firepower Threat Defense NAT policies.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/ftdnatpolicies

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/policy/ftdnatpolicies/{object_UUID}

Permissions: Devices>NAT>NAT List

DELETE autonatrules

Request Type: DELETE

Description: Deletes a NAT rule with the specified parameters.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/ftdnatpolicies/{container_UUID}/autonatrules/{object_UUID}

Permissions: Devices>NAT>NAT List >Modify NAT policy

PUT autonatrules

Request Type: PUT

Description: Modifies a NAT rule with the specified parameters.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/ftdnatpolicies/{container_UUID}/autonatrules/{autonatrule_UUID)

Permissions: Devices>NAT>NAT List >Modify NAT policy

POST autonatrules

Request Type: POST

Description: Creates a NAT policy with the specified parameters.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/ftdnatpolicies/{container_UUID}/autonatrules

Permissions: Devices>NAT>NAT List >Modify NAT policy

GET autonatrules

Request Type: GET

Description: Retrieves the NAT rule associated with the specific ID. If no ID is specified, retrieves a list of all NAT rules.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/ftdnatpolicies/{container_UUID}/autonatrules

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/policy/ftdnatpolicies{container_UUID}/autonatrules/{object_UUID}

Permissions: Devices>NAT>NAT List

DELETE manualnatrules

Request Type: POST

Description: Deletes a manual NAT rule in the specified NAT policy.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/ftdnatpolicies/{container_UUID}/manualnatrules/{object_UUID}

Permissions: Devices>NAT>NAT List >Modify NAT policy

PUT manualnatrules

Request Type: PUT

Description: Modify a manual NAT rule in the specified NAT policy.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/ftdnatpolicies/{container_UUID}/manualnatrules/{object_UUID}

Permissions: Devices>NAT>NAT List >Modify NAT policy

POST manualnatrules

Request Type: POST

Description: Creates manual NAT rules with the specified parameters.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/ftdnatpolicies/{container_UUID}/manualnatrules

Permissions: Devices>NAT>NAT List >Modify NAT policy

GET manualnatrules

Request Type: GET

Description: Retrieves the manual NAT rule associated with the specified ID. If no ID is specified, retrieves a list of all manual NAT rules.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/ftdnatpolicies/{container_UUID}/manualnatrules

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/policy/ftdnatpolicies/{container_UUID}/manualnatrules/{object_UUID}

Permissions: Devices>NAT>NAT List

GET natrules

Request Type: GET

Description: Retrieves the list of all NAT rules (manual and auto) associated with the specified NAT policy.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/ftdnatpolicies/{container_UUID}/natrules

Permissions: Devices>NAT>NAT List

GET intrusionpolicies

Request Type: GET

Description: Retrieves the intrusion policy associated with the specified ID. If no ID is specified, retrieves list of all intrusion policies.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/intrusionpolicies

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/policy/intrusionpolicies/{object_UUID}

Permissions: Policies>Access Control>Intrusion Policy

GET snmpalerts

Request Type: GET

Description: Retrieves the SNMP alert object associated with the specified ID. If no ID is specified, retrieves a list of all SNMP alert objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/snmpalerts

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/policy/snmpalerts/{object_UUID}

Permissions: Policies > Actions > Alerts > View Alerts

GET syslogalerts

Request Type: GET

Description: Retrieves the syslog alert object associated with the specified ID. If no ID is specified, retrieves a list of all syslog alert objects.

URL: /api/fmc_config/v1/domain/{domain_UUID}/policy/syslogalerts

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/policy/syslogalerts/{object_UUID}

Permissions: Policies > Actions > Alerts

Policy Assignment Services

PUT policyassignments

Request Type: PUT

Description: Modifies an assigned access policy to add a new device or a new device group.

URL: /api/fmc_config/v1/domain/{domain_UUID}/assignment/policyassignments/{object_UUID}

Permissions:

POST policyassignments

Request Type: POST

Description: Assigns an unassigned access policy to devices or device groups.

URL: /api/fmc_config/v1/domain/{domain_UUID}/assignment/policyassignments

Permissions:

GET policyassignments

Request Type: GET

Description: Retrieves the policy assignment associated with the specified ID. If no ID is specified, retrieves a list of all policy assignments to target devices.

URL: /api/fmc_config/v1/domain/{domain_UUID}/assignment/policyassignments

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/assignment/policyassignments/{object_UUID}

Permissions:

Parameters available for filtering: name

Status Services

GET taskstatuses

Description: Retrieves information about a previously submitted pending job/task with the specified ID. This is currently supported for device registration and deployment jobs.

URL for GET by ID: /api/fmc_config/v1/domain/{domain_UUID}/job/taskstatuses/{object_UUID}

Permissions: Modify Devices/Deployment

System Information

GET serverversion

Request Type: GET

Description: Requests version information for the server. If no ID is specified, retrieves a list of all servers.

URL: /api/fmc_platform/v1/info/serverversion

URL for GET by ID: /api/fmc_platform/v1/info/serverversion/{objectID}

Permissions: