Cisco NCS 520 Series Router Configuration Guide, Cisco IOS XE 17

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: August 3, 2021

Chapter: Feature History

Feature History

Feature History

The following table lists the new and modified features that are supported in the Cisco NCS 520 Series Router Configuration Guide in Cisco IOS XE 17 releases.


Feature	Description
Cisco IOS XE Bengaluru 17.6.1
MAC Flap Logging	This feature enables you to use the mac-flap-syslog-enable command to log MAC flap conditions into the console to help you debug issues.
Support for Dying Gasp	This feature enables hardware-based support of SNMP Dying Gasp for a quicker generation of SNMP Dying Gasp traps.
ZTP Support for LACP	Zero Touch Provisioning is now supported over EtherChannel (IEEE 802.3ad Link Bundling).

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)