- Configuring CEM
- CEM over MPLS QoS
- Configuring SONET
- Configuring SDH on 1-Port OC-192/STM-64 or 8-Port OC-3/12/48/STM-1/-4/-16 Module
- Configuring MSP on 1-Port OC192/STM-64 or 8-Port OC3/12/48/STM-1/-4/-16 Module
- Configuring SNCP on 1-Port OC192/STM-64 or 8-Port OC3/12/48/STM-1/-4/-16 Module
- Clock Recovery System for SAToP
- Configuring 5G Mode on 1-Port OC-192/STM-64 or 8-Port OC-3/12/48/STM-1/-4/-16 Interface Module
- Configuring Data Communication Channel
- Transparent Overhead Tunneling Data Communication Channel
- Target Identifier Address Resolution Protocol
- Unidirectional Path Switching Ring Over HDLC
- Serial Interfaces
- Configuring Support for NCS 4200 Combo 8-Port SFP GE and 1-Port 10 GE 20G Interface Module (NCS4200-1T8S-20CS)
1-Port OC-192 or 8-Port Low Rate CEM Interface Module Configuration Guide, Cisco IOS XE 16 (Cisco NCS 4200 Series)
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- August 1, 2019
Feedback