The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This guide provides instructions for unpacking the Cisco Network Convergence System (NCS) 4016 chassis and its components, moving the chassis to its permanent location, and mounting the chassis in a rack.
This document is intended for those who unpack the Cisco NCS 4016 chassis and Cisco installation partners who are responsible for moving and securing the Cisco NCS 4016 chassis. No additional knowledge of routing or the Cisco IOS XR software is assumed.
This document uses the following conventions:
|
Convention |
Indication |
|---|---|
|
bold font |
Commands and keywords and user-entered text appear in bold font. |
|
italic font |
Document titles, new or emphasized terms, and arguments for which you supply values are in italic font. |
|
[ ] |
Elements in square brackets are optional. |
|
{x | y | z } |
Required alternative keywords are grouped in braces and separated by vertical bars. |
|
[ x | y | z ] |
Optional alternative keywords are grouped in brackets and separated by vertical bars. |
|
string |
A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks. |
|
courier font |
Terminal sessions and information the system displays appear in courier font. |
|
< > |
Nonprinting characters such as passwords are in angle brackets. |
|
[ ] |
Default responses to system prompts are in square brackets. |
|
!, # |
An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line. |
 Note |
Means reader take note . Notes contain helpful suggestions or references to material not covered in the manual. |
 Tip |
Means the following information will help you solve a problem . The tips information might not be troubleshooting or even an action, but could be useful information, similar to a Timesaver. |
 Timesaver |
Means the described action saves time . You can save time by performing the action described in the paragraph. |
 Caution |
Means reader be careful . In this situation, you might perform an action that could result in equipment damage or loss of data. |
DANGER |
IMPORTANT SAFETY INSTRUCTIONSThis warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device.SAVE THESE INSTRUCTIONS |
DANGER |
Statements using this symbol are provided for additional information and to comply with regulatory and customer requirements. |
For complete planning and installation information, see the following documents:
Table 1 lists the technical changes made to this document since it was first created.
|
Date |
Change Summary |
|---|---|
|
May 2015 |
Initial release of this document. |
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html .
Subscribe to What’s New in Cisco Product Documentation , which lists all new and revised Cisco technical documentation, as an RSS feed and deliver content directly to your desktop using a reader application. The RSS feeds are a free service.
Feedback