To configure route convergence monitoring and enter router convergence monitoring and diagnostics (rcmd) configuration mode, use the router-convergence command in global configuration mode. To remove all router convergence monitoring configurations and exit the rcmd mode, use the no form of this command.
[Optional] Disables the monitoring of route convergence on the entire router.
RCMD is disabled.
Command ModesGlobal configuration
This command was introduced.
To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
This example shows how to configure router-convergence command and enable rcmd configuration mode:
RP/0/RP0/CPU0:router#configure RP/0/RP0/CPU0:router(config)#router-convergence RP/0/RP0/CPU0:router(config-rcmd)#