Contents
A - C - H - I - L - M - P - R - S - V
Index
A
Applying a Layer 2 ACL to a Service Instance 1Applying a Layer 2 ACL to Three Service Instances on the Same InterfaceExample 1C
Configuring a Layer 2 ACL with ACEs on a Service Instance 1Creating a Layer 2 ACL 1H
How to Configure Layer 2 ACLs on EVCs 1I
interface command 1interface virtual-template command 1ip unnumbered bdi command 1L
L2Fdisplaying protocol tunnel and message identifiers 1LAPB 1Level 2 ForwardingSee L2F 1Link Access Procedure, BalancedSee LAPB 1M
mtu command 1P
ppp authentication chap command 1pppoe enable command 1PPPoE on Ethernetconfiguration (example) 1description 1Ethernet subinterface, specifying 1Prerequisites for Layer 2 ACL on EVCs 1R
Relationship between ACLs and Ethernet Infrastructure 1S
show vpdn command 1V
virtual templatesPPPoE on BDIcreating and configuring 1
Layer 2 Configuration Guide, Cisco IOS XE 16 (Cisco ASR 920 Series)
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- September 13, 2019
Feedback