The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This section lists all the new and changed features for the Telemetry Configuration Guide for Cisco ASR 9000 Series Routers .
Feature | Description | Changed in Release | Where Documented |
---|---|---|---|
Support for telemetry dark bandwidth |
Model-driven telemetry supports MPLS dark bandwidth with the polling interval reduced to 10 seconds. The dark bandwidth is the total interface bandwidth utilization in the data plane, excluding the RSVP-TE bandwidth. |
Release 6.4.1 |
Configuring RSVP-TE Bandwidth Accounting topic in Implementing MPLS Traffic Engineering chapter in MPLS Configuration Guide for Cisco ASR 9000 Series Routers. |
Support for Event-driven telemetry through NETCONF notification for Link Layer Discovery Protocol (LLDP) events |
NETCONF client is configured to receive event notifications from a NETCONF server through a subscription. |
Release 6.4.1 |
Configure Model-driven Telemetry chapter |