Skip to content
Skip to search
Skip to footer

Cisco IR807 Industrial Integrated Services Router Hardware Installation Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: October 15, 2018

Chapter: Technical Specifications

Technical Specifications
Router Specifications

Technical Specifications

Provides router, port, cabling specifications, and power adapters for the device.

Router Specifications

The following information lists the operational limits of the Cisco IR807. Operating the router outside of the limits specified is not supported.

Table 1. Physical Characteristics
Description	Design Specification
Dimensions (H x W x D)	(height x width x depth x) are 1.85" x 5.07" x 4.50" (4.69 x 12.85 x 11.43 cm).

Table 2. Environmental Operating Ranges
Description	Design Specification
Operating Temperature and Altitude	-40° to 140°F (-40° to 60°C) in a sealed NEMA cabinet with no airflow -40° to 158°F (-40° to 70°C) in a vented cabinet with 40 lfm of air -40° to 167°F (-40° to 75°C) in a forced air enclosure with 200 lfm of air (type tested at +85C for 16 hours) NOTE: This product has been safety certified up to 60C maximum ambient. -500 to 5,000 feet. Derate max operating temperature 1.5°C per 1000 feet. 10,000 ft maximum
Operating Altitude	13,800 ft. (4206m)
Humidity	5% — 95% non-condensing

Table 3. Environmental Tests
Description	Design Specification
Vibration	IEC 61850-3, IEEE 1613
Shock	Half Sine (operating) Duration = <2 ms Velocity = 2.39 m/s Number of shocks: A series of 6 shocks, one on each side. IEEE 1613 and IEC61850-3 NUP T2 shock testing, non-NEBS 3396

Table 4. Certifications
Description	Design Specification
Standard Safety Certifications	UL 60950-1, 2nd edition CAN/CSA C22.2 No. 60950-1, 2nd edition EN 60950-1, 2nd edition CB to IEC 60950-1, 2nd edition with all group differences and national deviations
EMC Emissions	EN55022/CISPR22, CFR 47 Part 15, ICES003, VCCI-V-3, AS/NZS CISPR22, CNS13438, EN300- 386, EN61000-3-2, EN61000-3-3, and EN55032/CISPR32
EMC Immunity	EN55024/CISPR24, (EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11), EN55035/CISPR35, and EN300-386
Cellular Radio	EN 301 908-1, EN 301 908-2, EN 301 511, and EN 301 908-13
Compliance	IP30 compliant when vertical and cables downward.
Radio Immunity	EN301 489-1, EN 303 413, EN 301 489-19, EN 301 489-52, and EN 62311

Table 5. Transportation/Storage Conditions
Description	Design Specification
Temperature	-40 to +85°C (–40 to +185°F)
Humidity	10 – 95%
Altitude	4570 m (15,000 ft)

Table 6. Router DC Power Adapter
Description	Design Specification
Input Voltage	Nominal voltage: 12V to 48V DC Absolute: 9.6 to 60V DC input
Maximum Power Consumption	10 Watts

Table 7. Country Marks
Description	Design Specification
Country marks	FCC, CE, BSMI, IC

Table 8. Hazardous Locations
Description	Design Specification
Hazardous Locations	ANSI/ISA 12.12.01 (Gas groups A-D) CSA 22.2 No 213 (Gas groups A-D) UL/CSA 60079-0, -15 (Class I, Zone 2, Gas groups IIC) IEC 60079-0, -15 IECEx test report EN 60079-0, -15 ATEX certification (Class I, Zone 2, Gas groups IIC)

Was this Document Helpful?

Feedback

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)