Use the Site Log to
provide a record of actions related to installing and maintaining the chassis.
Keep it in an accessible place near the chassis so that those who perform tasks
have access to it. Use the Installation Checklist (see the “Site Planning”
section) to verify the steps in the installation and maintenance of your
chassis. Site Log entries can include the following:
Installation progress—Make a
copy of the Cisco NCS 4202 Installation Checklist, and insert it into the Site
Log. Make entries as you complete each task.
Upgrade, removal, and
maintenance procedures—Use the Site Log as a record of ongoing chassis
maintenance and expansion history. Each time a task is performed on the Cisco
NCS 4202, update the Site Log to reflect the following:
Removal or replacement of interface
schedules and requirements
Table below shows a
sample site log. Make copies of the sample, or design your own site log to meet
the requirements of your site and equipment.
Table 1. Site Log
of Action Performed or Symptom Observed