The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
NCS 1004 supports the following MIBs.
CISCO-CONFIG-MAN-MIB
CISCO-FLASH-MIB
CISCO-ENTITY-REDUNDANCY-MIB
CISCO-SYSTEM-MIB
CISCO-ENTITY-ASSET-MIB
EVENT-MIB
DISMAN-EXPRESSION-MIB
CISCO-FTP-CLIENT-MIB
NOTIFICATION-LOG-MIB
CISCO-RF-MIB
RADIUS-AUTH-CLIENT-MIB
RADIUS-ACC-CLIENT-MIB
IEEE8023-LAG-MIB
CISCO-TCP-MIB
UDP-MIB
CISCO-BULK-FILE-MIB
CISCO-CONTEXT-MAPPING-MIB
CISCO-OTN-IF-MIB
CISCO-ENHANCED-MEMPOOL-MIB
CISCO-PROCESS-MIB
CISCO-SYSLOG-MIB
ENTITY-MIB
CISCO-ENTITY-FRU-CONTROL-MIB
CISCO-IF-EXTENSION-MIB
RMON-MIB
CISCO-OPTICAL-MIB
CISCO-ENTITY-SENSOR-MIB
LLDP-MIB
The following table provides more information about SNMP MIBs and related documentation links.
Task |
Link |
---|---|
Determine the MIB definitions |
|
Configure SNMP |
|
Understand SNMP best practices about the recommended order of SNMP query, maximum cache hit, and SNMP retry and timeout recommendation |
Make sure that you configure snmp-server community as the SystemOwner to have the admin-plane parameters to appear to entity MIB. The parameters of fans and power supply units are examples of admin-plane parameters.