Access: System > Log Settings
This page enables you to aggregate all syslog messages to a local syslog server or remote syslog server.
Configuring Log Settings
To configure syslog messages to go to a local or remote syslog server, do the following:
Step 1 Go to the WAE UI and select WAE System > Log Settings.
Step 2 Check the Enable check box.
Step 3 Do one of the following:
- Local—Select this option if you want messages to go to a local syslog server.
- Remote—Select this option if you want messages to go to a remote syslog server and enter the IP address of the remote server.
Step 4 From the drop-down list, select a facility (Local 0 - 7). The local use facilities are not reserved. Processes and applications that do not have pre-assigned facility values can use any of the eight local use facilities.
Step 5 Enter the port number to be used on the server.
Step 6 Click Save.