The Namespace Manager provides a GUI for managing the system namespace known as "config," which contains the set of Cisco standardized events, such as com.cisco.cns.mgmt.config.load, etc. By default, each event defines a mapping to itself for both the publish and subscribe mapping.
If you are using the Cisco Configuration Engine Software Development Kit API Reference and Programmer Guide, 1.6 to develope your own application, you are free to redefine the map according to your application needs. Additional application-specific namespace can be defined by means of the Cisco Configuration Engine SDK.
The system namespace is guaranteed to return a mapping even for undefined events; in which case, the input map is returned as the output map. This is a requirement for supporting future devices which might depend on new events that are not currently defined.
To access Namespace management tasks, log into the system (see "Logging In and Out" section on page 2-1). Then, from the Home page, click the Tools tab. The Tools page appears.
From the Tools page, click Namespace Mgr. The Namespace Management page appears showing:
From the Namespace Manager main page, click View Events. The events list for the current application (config) appears (see Figure 7-1).
Figure 7-1 Events List
The events list for the current application (config) appears (see Figure 7-1).
Step 1 From the Namespace Manager main page, click Add Events.
The Event information page appears (see Figure 7-2).
Figure 7-2 Event Information Page
Step 2 Enter an Event name.
Step 3 Use the drop-down arrow to select the NSM Mode.
•Algorithmic - Mapped events qualified with group name or device name are returned from NSM. This is the preferred mode for all users. It allows you to provision the selected group(s) of device(s).
•Non-Algorithmic - Mapped events are returned from NSM without group name or device name. You are forced to provision all device(s).
Step 4 Enter a valid Event Mapping.
For example: cisco.mgmt.cns.exec.reload
Step 5 To define separate parameters for Subscriber Mapping and Publisher Mapping, click Advanced.
The advanced event information page appears (see Figure 7-3).
Figure 7-3 Advanced Event Information Page
Step 6 Enter information in the appropriate fields, then click Add.
Step 1 From the Namespace Manager main page, click Edit Events.
The Event information page appears (see Figure 7-4).
Figure 7-4 Event List to Edit
Step 2 Click on the Event you want to edit.
The Edit Event parameters page appears (see Figure 7-5).
Figure 7-5 Edit Event Parameters
Step 3 Modify all applicable fields, then click Edit.
Step 1 From the Namespace Manager main page, click Delete Events.
The Delete Event list page appears (see Figure 7-6).
Figure 7-6 Event List for Deleting Events
Step 2 Check to select the Event(s) you want to delete, then click Delete.
A confirmation box appears.
Step 3 To Delete the selected Event(s), click OK.