DHCP Features in Cisco IOS Release 12.2(28)SB

Available Languages

Download Options

  • PDF     (134.9 KB)
    View with Adobe Reader on a variety of devices
Updated:January 30, 2006

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

DHCP Features in Cisco IOS Release 12.2(28)SB

Table Of Contents

DHCP Features in Cisco IOS Release 12.2(28)SB


DHCP Features in Cisco IOS Release 12.2(28)SB

Many Dynamic Host Configuration Protocol (DHCP) features are now integrated into Cisco IOS Release 12.2(28)SB. See the "DHCP Features Roadmap" for information about which release trains support DHCP features.

Configuration Information

Configuration information is included in the Cisco IOS IP Addressing Services Configuration Guide, Release 12.4T, at the following URL:

•http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tiad_c/dhcp/index.htm

Command Reference Information

Command reference information is included in the "DHCP Commands" chapter of the Cisco IOS IP Addressing Services Command Reference, Release 12.4T, at the following URL:

•http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tiad_r/index.htm

See the command history table on each command reference page to determine if a command is supported on Cisco IOS Release 12.2(28)SB.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products