- Cisco Unified Border Element Management
- Configuring Cisco UBE Out-of-dialog OPTIONS Ping for Specified SIP Servers or Endpoints
- Stateful Switchover Between Redundancy Paired Intra or Inter-box Devices
- SIP-to-SIP Extended Feature Functionality for Session Border Controllers
- Clearable SIP-UA Statistics
- Additional References
- Glossary
Clearable SIP-UA Statistics
This feature introduces the CISCO-SIP-UA-MIB. The MIB is available by default.
To locate and download MIBs for selected platforms, Cisco IOS software releases, and feature sets, use Cisco MIB Locator found at the following URL:
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the Feature Information Table at the end of this document.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Prerequisites for Clearable SIP-UA Statistics
Cisco Unified Border Element
- Cisco IOS Release 12.3(2)T or a later release must be installed and running on your Cisco Unified Border Element.
Cisco Unified Border Element (Enterprise)
- Cisco IOS XE Release 2.5 or a later release must be installed and running on your Cisco ASR 1000 Series Router.
Feature Information for Clearable SIP-UA Statistics
The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
| Table 1 | Feature Information for Clearable SIP-UA Statistics |
| Feature Name |
Releases |
Feature Information |
|---|---|---|
| Clearable SIP-UA Statistics |
12.2(13)T 12.2(15)T 12.3(2)T |
The Clearable SIP-US Statistics feature adds MIB support. No commands or configurations were introduced or modified in this release. |
| Table 2 | Feature Information for Clearable SIP-UA Statistics |
| Feature Name |
Releases |
Feature Information |
|---|---|---|
| Clearable SIP-UA Statistics |
Cisco IOS XE Release 2.5 |
The Clearable SIP-US Statistics feature adds MIB support. No commands or configurations were introduced or modified in this release. |
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
Feedback