MPLS Basic Configuration Guide (ASR 900 Series)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: March 26, 2015

Chapter: New and Changed Information

New and Changed Information

Table 1 New and Changed Features
Feature	Description	ASR 903 RSP1 Module	ASR903 RSP2 Module	ASR 902	Where Documented
MPLS	This features describes configuring and monitoring Multiprotocol Label Switching (MPLS) functionality.	Cisco IOS XE Release 3.5S	Cisco IOS Release 3.13S	Cisco IOS XE Release 3.12S	How to Configure MPLS Information About MPLS
MPLS Transport Profile MPLS OAM Support for Multisegment Pseudowires Linear Protection/PSC support MPLS-TP Path Protection Continuity Check via BFD	This features enables you to create tunnels that provide the transport network service layer over which IP and MPLS traffic traverses.	Cisco IOS XE Release 3.5S Cisco IOS XE Release 3.9S	Cisco IOS Release 3.13S	Cisco IOS XE Release 3.12S	How MPLS Transport Profile Works MPLS-TP L2VPN Pseudowire Redundancy for Static and Dynamic Multisegment Pseudowires MPLS-TP Linear Protection with PSC Support Configuring Bidirectional Forwarding Detection Templates
MPLS Multilink PPP Support	This feature ensures that MPLS Layer 3 Virtual Private Networks (VPNs) with quality of service (QoS) can be enabled for bundled links.	Cisco IOS XE Release 3.9S	Cisco IOS Release 3.14S	Cisco IOS XE Release 3.12S	Information About MPLS Multilink PPP Support
MPLS LSP Ping, Traceroute, and AToM VCCV	This feature can detect when an LSP fails to deliver user traffic	Cisco IOS XE Release 3.7S	Cisco IOS Release 3.13S	Cisco IOS XE Release 3.12S	Any Transport over MPLS Virtual Circuit Connection
VPLS Configuration over MPLS-TP	This feature configure VPLS over MPLS-TP on the Cisco ASR 900 Series Routers.	Cisco IOS XE Release 3.9S	Cisco IOS Release 3.13S	Cisco IOS XE Release 3.12S	VPLS Configuration over MPLS-TP
Label Distribution Protocol NonStop Routing (LDP NSR)	The NSR LDP Support feature allows the Label Distribution Protocol (LDP) to continue to operate across a node failure without losing peer sessions.	NA	Cisco IOS XE Release 3.15S	NA	Enabling NSR LDP Support
Circuit Emulation Service over UDP	This feature extends the implementation of Cisco IOS Circuit Emulation Service (CES) by supporting pseudowire emulation (PWE) function to be performed over an Internet Protocol (IP) network directly.	Cisco IOS Release 3.14S		Cisco IOS Release 3.14S	Circuit Emulation Service over UDP

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)