Cisco APIC Layer 2 Networking Configuration Guide, Release 5.2(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: June 7, 2021

New and Changed

This chapter contains the following section:

New and Changed Information

The following tables provide an overview of the significant changes to the chapters in this guide up to the current release. The table does not provide an exhaustive list of all changes made to the topics or of the new features up to this release.

Table 1. New Features and Changed Information for Cisco APIC 5.2(1)
Feature	Description	Where Documented
4x100G breakout support on N9K-X9716D-GX	4x100G breakout is now supported on the Cisco N9K-X9716D-GX line card fabric ports.	Guidelines and Limitations for Auto Breakout Ports on Fabric Links
MACsec support on N9K-X9716D-GX	MACsec is now supported on the Cisco N9K-X9716D-GX line card.	Guidelines and Limitations for MACsec on switches

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)