Cisco Network Insights for Resources Application for Cisco APIC User Guide, Release 2.1.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Cisco Network Insights for Resources Application for Cisco APIC User Guide, Release 2.1.x

Chapter Title

Cisco Network Insights for Resources Installation

Results

Updated:
December 5, 2019

Chapter: Cisco Network Insights for Resources Installation

Cisco Network Insights for Resources Installation

This chapter contains the following sections:

About Cisco Network Insights for Resources

Cisco Network Insights for Resources (Cisco NIR) application consists of monitoring utilities that can be added to the Cisco Application Policy Infrastructure Controller (Cisco APIC). The application can also be added to the Cisco Application Services Engine with Cisco APIC.

Software Requirements

The following are software requirements for Cisco NIR on Cisco Application Services Engine with Cisco Application Policy Infrastructure Controller.

Table 1. Software Requirements for Cisco NIR on Cisco Application Services Engine with Cisco APIC

Software

Release

Cisco Application Policy Infrastructure Controller (Cisco APIC). Refer to Cisco APIC for details.

3.2(8) and 4.2(3)

Cisco Application Services Engine. Refer to Cisco Application Services Engine for details.

1.1.2i

Hardware Requirements

This section describes the Cisco ACI deployment requirements for Cisco NIR software telemetry.

The following are required for Cisco NIR application running on the Cisco Application Services Engine with Cisco APIC:

Table 2. Hardware Requirements for Cisco NIR on Cisco Application Services Engine with Cisco APIC

Feature

Hardware

Cisco Application Policy Infrastructure Controller (Cisco APIC)

Use existing Cisco APIC cluster M3 and L3

The Cisco Application Services Engine cluster

SE-CL-L3

Flow Telemetry

The following series switches and line cards are supported:

  • Cisco Nexus 9300-EX, -FX, -FX2, and 9500 platform switches

  • Cisco Nexus X9732C-EX line card

Downloading Cisco NIR Application from the Cisco App Center

This section contains the steps required to download Cisco NIR application in the Cisco APIC in preparation for installation.

Before you begin

You must have administrative credentials to download applications in the Cisco APIC.

Procedure

Step 1

Log in to the Cisco APIC GUI with admin privileges.

  • If you do not have admin privileges, log in to the Cisco App Center to download the application.
Step 2

Choose Apps.

Step 3

Click the Download Applications icon on the far-right side of the work pane.

A new browser tab or window opens to the Cisco App Center.
Step 4

Search for Cisco Network Insights for Resources application on the search bar.

Step 5

Select the Cisco Network Insights for Resources application you want to download and click Download for that app to begin the process of downloading the app to your local machine.

Step 6

Review the license agreement and, if OK, click Agree and download.

The Cisco Network Insights for Resources application is downloaded to your local machine.

What to do next

Note the download location of the Cisco Network Insights for Resources file on your local machine. Make sure to move the downloaded Cisco Network Insights for Resources file to a http server, which can then be uploaded to Cisco Application Services Engine with Cisco APIC.

Installing Cisco NIR Application on Cisco APIC

This section contains the steps required to install Cisco NIR application on Cisco APIC. These steps are required for software telemetry.

Before you begin

You must have administrative credentials to install Cisco NIR application.

Procedure

Step 1

Log in to the Cisco APIC GUI with admin privileges.

Step 2

Click the Admin > Downloads tab.

Step 3

Click the Task icon on the far-right side of the Downloads work pane and select Add File to APIC.

The Add File to APIC dialog appears.
Step 4

Enter the name of the download file in the Download Name field.

Step 5

In the Protocol field, choose Secure Copy.

Step 6

In the URL field, enter the path to the download file image location.

Step 7

Enter your name and password in the Username and Password fields.

Step 8

Enter Submit.

Step 9

Click the Operational tab and then click the Refresh icon to see the download status.

The application will automatically install once downloaded. This could take approximately five minutes to complete.
Step 10

After installing, click the Operations > NIR tab at the top of the GUI.

Once the application installation is completed, an application icon appears with the Enable button in green.

Step 11

Click Enable to open the application.

A Details dialog appears.
Step 12

Click Enable.

The application icon appears with a blue Open button.

Step 13

Click Open.

The application opens with a splash screen welcome dialog for Cisco NIR.

Step 14

Click Begin First Time Setup to setup the Cisco NIR application.

What to do next

Continue with the setup of the Cisco Network Insights for Resources application located in the Cisco NIR Initial Setup section.

Installing Cisco NIR on Cisco Application Services Engine with Cisco APIC

This section contains the steps required to install Cisco Network Insights for Resources application on the Cisco Application Services Engine with the Cisco APIC.

Before you begin

Before you begin installing a Cisco NIR application on the Cisco Application Services Engine with Cisco APIC, make sure the following requirements are met:

  • You have installed and configured the Cisco Application Services Engine.

  • You must have administrator credentials to install Cisco NIR application.

Procedure

Step 1

Log in to the Cisco APIC GUI with admin privileges.

Step 2

Click Admin > Downloads tab on the top navigation bar.

Step 3

Click Service Engine from the tabs on the far-right side.

Step 4

Click the Task icon on the far-right side of the Downloads work pane and select Add File to Service Engine.

Step 5

In the URL enter the http address and click Submit.

Click Refresh icon on the far-right side of the Downloads work pane to check the upload status.

Step 6

Once the Status is completed then click the Apps tab.

The Cisco NIR application installation progress dialog appears.

Step 7

After installing, click the Apps tab.

Once the application installation is completed, the NIR icon appears with the Enable button in green.

Step 8

Click Enable to open the application.

A Details dialog appears.
Step 9

Click Enable.

The application icon appears with a blue Open button.

Step 10

Click Open from the Cisco NIR application dialog.

The application opens with a splash screen welcome dialog for Cisco NIR.

Step 11

Click Begin First Time Setup to setup the Cisco NIR application.

What to do next

Continue with the setup of the Cisco Network Insights for Resources application located in the Cisco NIR Initial Setup section of the next chapter.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco