Appliance Specifications

This chapter provides the appliance specifications.

Cisco DNA Traffic Telemetry Appliance Specifications

The following table lists the Cisco DNA Traffic Telemetry Appliance physical specifications.


Note

The Cisco DNA Traffic Telemetry Appliance has the route processor, embedded services processor, and SIP integrated in the chassis.

Table 1. Cisco DNA Traffic Telemetry Appliance Specifications

Description

Specification

Dimensions (H x W x D)

Height: 1.71 in. (43.43 mm)

Width: 17.3 in. (439.42 mm)

Depth: 22.50 in. (571.5 mm) including card handles, cable-management brackets, and power supply handles)

Weight

25 lb fully loaded

Nominal operating temperature

0° to 40° C

Short-term operating temperature

0° to 50° C

Nominal operating humidity

10 to 90% relative humidity

Short-term operating humidity

5 to 90%

Storage temperature

–20° to +70° C

Power consumption

  • Maximum (DC): 242 W

  • Maximum (AC): 250 W

  • Maximum (Out): 250 W

Cisco DNA Traffic Telemetry Appliance Memory and Storage Options

The following table lists the hardware memory and storage options supported on the Cisco DNA Traffic Telemetry Appliance.

Table 2. Memory and Storage Options for Cisco DNA Traffic Telemetry Appliance

Memory Type

Default

Maximum System Support

ESP

4 GB DRAM

4 GB DRAM

Route Processor

The Cisco DNA Traffic Telemetry Appliance comes with 8 GB DRAM (default)

16 GB DRAM maximum

External USB flash memory

The Cisco DNA Traffic Telemetry Appliance supports two USB flash memory secure tokens

—

Solid State Drive (SSD)

Two 400-GB SATA SSDs

—