-
- Video Services Provisioning Model
- Video Virtual Carrier Group and Virtual Edge Input
- Service Distribution Group
- Video QAM Carriers
- Logical Edge Devices
- Cisco Smart Licensing for Video
- Physical to Virtual Binding
- Table Based Configuration
- Management IP Interface
- Video Encryption
- Global Video Configuration
- Advanced Video MPEG Features
- Important Notes
Important
Notes
The following are some important notes for Management IP Interface and Virtual Routing Interface.
Video Packet Routing Requirements
A routing protocol, such as OSPF or IS-IS, must be enabled on the cBR-8 in order for video data packets from the head end to reach the virtual QAMs. On the cBR-8, enable a routing protocol as described in the routing configuration guide.
Once the routing protocol is set up correctly, the cBR-8 will advertise the internal static routes for the video data path to the head end.
The user needs to configure the Virtual Edge Input (VEI) with a routable IP address from within the customer's network. More information, see Configuring Virtual Edge Input under Logical Edge Device.
Feedback