The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Following are some troubleshooting tips for installing and using the Cisco Smart PHY.
Problem |
Solution |
---|---|
Syslog messages are not received. |
Syslog messages MUST be sent to TCP port 8514 for it to take effect. Configure: logging host 192.0.2.1 transport tcp port 8514 |
Unable to access the UI. |
Execute the following command to view the iptable rules: iptables -L -t nat -n |
File system out of memory. |
Restart the logger: sudo docker restart robot-logger |
libguestfs appliance crash. |
Clean the directory: sudo rm -fr .guestfs-0/ pwd /var/tmp |