E1 Layer 1 Troubleshooting Flowchart

Available Languages

Download Options

  • PDF     (13.0 KB)
    View with Adobe Reader on a variety of devices
Updated:January 4, 2005
Document ID:9320

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This document provides a flowchart you can use to troubleshoot E1 layer 1.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

This document is not restricted to specific software and hardware versions.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

For more information on document conventions, refer to the Cisco Technical Tips Conventions.

Flowchart

To see more information, click the command boxes.

e1_flchrt_layer1.gif

Related Information

E1 Layer 1 Troubleshooting RJ-45 Cables RJ-45 Cables RJ-45 Cables

Contributed by

  • jdragers
    pdetroye

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products