Enable Simple Network Management Protocol (SNMP) Service on 300 Series Managed Switches

Available Languages

Download Options

  • PDF     (61.6 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (115.2 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (82.8 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:August 8, 2017
Document ID:SMB2010

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Enable Simple Network Management Protocol (SNMP) Service on 300 Series Managed Switches

Objective

Simple Network Management Protocol (SNMP) is an application layer protocol that is used to manage and monitor a network. For the different SNMP features to work properly you first need to enable the SNMP service. This article explains how to enable SNMP Service on the 300 Series Managed Switches.

Applicable Devices

• SF/SG 300 Series Managed Switches

Software Version

• 1.3.0.62

Enable SNMP Service

Step 1. log in to the web configuration utility and choose Security > TCP/UDP Services. The TCP/UDP Services page opens:

Step 2. Check the SNMP Service check box to enable SNMP features on the switch.

Step 3. Click Apply to enable the SNMP service.

Revision History

Revision Publish Date Comments
1.0
10-Dec-2018
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco