PDF(162.7 KB) View with Adobe Reader on a variety of devices
ePub(208.4 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(220.7 KB) View on Kindle device or Kindle app on multiple devices
Updated:December 13, 2018
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Configuration of Virtual Private Network (VPN) Passthrough on the RV130 and RV130W Routers
A VPN Passthrough allows VPN traffic to pass through a device and allow clients to connect to the VPN server. VPN Passthrough is required for a VPN connection to be successful, since the RV130 and RV130W use NAT (Network Address Translation).
The objective of this document is to show you how to enable or disable VPN Passthrough on the RV130 and RV130W Routers.
Enable or Disable VPN Passthrough
Step 1. Log into the web configuration utility and choose VPN > VPN Passthrough. The VPN Passthrough page opens:
Step 2. In the IPSec Passthrough field, the Enable check box is checked by default. IPSec (Internet Protocol Security) is a suite of protocols that allows secure exchange of packets. If you do not want any IPSec traffic to pass through the device, uncheck this check box.
Step 3. In the PPTP Passthrough field, the Enable check box is checked by default. PPTP (Point-to-Point Tunneling Protocol) is a way to transmit PPP (Point-to-Point Protocol) packets over a VPN. If you do not want any PPTP traffic to pass through the device, uncheck this box.
Step 4. In the L2TP Passthrough field, the Enable check box is checked by default. L2TP (Layer 2 Tunneling Protocol) is a tunneling protocol used to transmit PPP packets in VPNs. If you do not want any L2TP traffic to pass through the device, uncheck this box.
Step 5. Click Save to save any changes made on VPN Passthrough page.