PDF(39.6 KB) View with Adobe Reader on a variety of devices
ePub(83.7 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(88.8 KB) View on Kindle device or Kindle app on multiple devices
Updated:December 11, 2018
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Session Timeout Configuration on the RV110W VPN Firewall
The Session Timeout controls how long the administrative interface can be idle before the session is logged out for security reasons.
This article explains how to configure the Session Timeout on the RV110W Wireless Firewall.
Configure Session Timeout
Step 1. Log in to the web configuration utility and choose Administration > Session Timeout. The Session Timeout page opens:
Step 2. From the Administrator Inactivity Timeout drop-down list, choose the amount of time (in minutes) an admin can be idle before the admin session is terminated. If Never is chosen, the admin session does not timeout.
Step 3. From the Guest Inactivity Timeout drop-down list, choose the amount of time (in minutes) a guest can be idle before the guest session is terminated. If Never is chosen, the guest session does not timeout.