Universal Plug and Play (UPnP) Configuration on the RV110W Routers

Available Languages

Download Options

  • PDF     (81.2 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (123.1 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (123.2 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 11, 2018
Document ID:SMB4705

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Universal Plug and Play (UPnP) Configuration on the RV110W Routers

 Objective

Universal Plug and Play (UPnP) is a network protocol that allows devices to discover each other on the network. The discovered devices can then establish network services for data sharing, communications, and entertainment. UPnP also include a feature that automatically configures the router to open and close ports for internet application, such as gaming. One of the main feature that UPnP option provide is that, when connected to a network they automatically establish working configurations with other devices. The UPnP architecture allows device-to-device networking of personal computers, network capable home appliances, electronics devices and wireless devices.

This document explains how to enable UPnP on the Cisco RV110W routers.

Applicable Device

• RV110W

Software Version

• 1.2.0.9 

UPnP Configuration

Step 1. Log into the web configuration utility and choose Firewall > Basis Settings. The Basic Settings page opens:

 

Step 2. Check Enable to enable UPnP.

Step 3. (Optional) Check the check box to Enable Allow Users to Configure. With the enable option checked the user will be able to configure. If it is disabled then the router wont allow application to add forwarding rule.

Step 4. (Optional) Check Enable to enable Allow User to Disable Internet Access. This will disable the internet access. 

Step 5. Click Save. 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco