The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Bonjour is a service discovery protocol that is used for automatic discovery of devices and services on IP networks. Bonjour enables automatic IP address assignment without a DHCP server, name to address translation without a DNS server, and service discovery without a directory server. When Bonjour is enabled, the router periodically multicasts Bonjour service records to the entire local network to advertise the existence of RV32x device and the services that it provides.
This article explains how to enable and manage bonjour on the RV32x VPN Router Series.
• RV320 Dual WAN VPN Router
• RV325 Gigabit Dual WAN VPN Router
Step 1. Log in to the web configuration utility and choose System Management > Discovery-Bonjour. The Discovery-Bonjour page opens:
Step 2. Bonjour is enabled globally by default. Uncheck the checkbox in the Discovery field to disable bonjour globally.
Step 3. Bonjour is enabled on each VLAN by default. This allows devices that are associated with the specified VLAN to discover the Bonjour services available on the RV32x VPN Router Series. In the Bonjour Interface Control Table, uncheck the Enable Bonjour checkbox that corresponds to the desired VLAN ID to disable Bonjour on the VLAN.
Step 4. Click Save. Bonjour is either enabled globally or on the specified VLANs of the RV32x VPN Router Series.