PDF(12.3 KB) View with Adobe Reader on a variety of devices
ePub(50.0 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(80.2 KB) View on Kindle device or Kindle app on multiple devices
Updated:November 29, 2018
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Bonjour Configuration on RV215W
Bonjour is a service advertisement and discovery protocol that enables the automatic discovery of computers, devices, and services on IP networks. In RV215W Bonjour only advertises the default services configured on the device when it is enabled. Bonjour is a feature that allows network devices to automatically discover each other without the need to manually enter IP addresses or configure a DNS server.
The objective of this document is to show how to configure Bonjour discovery on the RV215W.
Step 1. Log in to the web configuration utility and choose Administration > Bonjour. The Discovery - Bonjour page opens:
Step 2. Check the Enable check box to enable Bonjour on the device. Bonjour is used because the devices connected to the RV215W do not need to be manually found and can be used for different purposes, for example: computers, servers, and printers.
Step 3. In the Bonjour Interface Control Table, check the Enable Bonjour check box for the desired VLAN to enable Bonjour on that particular VLAN. It allows devices present on the VLAN to discover the Bonjour services available on the RV215W router.