Basic Wireless Settings on RV110W

Available Languages

Download Options

  • PDF     (433.2 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (468.7 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (187.8 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:November 29, 2018
Document ID:SMB2568

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Basic Wireless Settings on RV110W

Objective

With the the web configuration utility, an user can change various wireless settings on the RV110W so that the router runs at its optimum performance. This article explains how to configure basic wireless settings on the RV110W.

Applicable Devices

  • RV110W

Steps of Procedure

Step 1. Use the web configuration utility to choose Wireless > Basic Settings. The Basic Setting page opens.

Step 2. To the right of Radio, check the Enable checkbox to enable wireless networks.

Step 3. From the Wireless Network Mode drop-down field, choose a wireless network mode.

  • B/G/N-Mixed — This option allows Wireless-N, Wireless-B, and Wireless-G devices to connect to the network.
  • B Only — This option only allows Wireless-B devices connect to the network.
  • G Only — This option only allows Wireless-G devices connect to the network.
  • N Only — This option only allows Wireless-N devices connect to the network.
  • B/G-Mixed — This option allows Wireless-B and Wireless-G devices to connect to the network.
  • G/N-Mixed — This option allows Wireless-G and Wireless-N devices to connect to the network.

Step 4. If you choose B/G/N-Mixed, N-Only, or G/N-Mixed, click either the 20MHz radio button or the 20/40MHz radio button to set the wireless bandwidth.

Step 5. From the Wireless Channel drop-down menu, choose a channel to which to connect.

Step 6. From the AP Management VLAN drop-down menu, choose a VLAN ID to which to connect.

Step 7. To the right of U-APSD (WMM Power Save), check the Enable checkbox to enable the Unscheduled Automatic Power Save Delivery (U-APSD) (or WMM Power Save) to conserve power.

Step 8. Click Save to save changes or Cancel to discard them.

Wireless Table

Step 1. Check the checkbox in the first column of the Service Set Identifier (SSID) that you want to edit.

Step 2. Click Edit to edit SSID properties.

Step 3. In the Enable SSID column, click On/Off icon to enable an SSID.

Step 4. In the SSID Broadcast column, check the check box to broadcast the SSID to other wireless devices.

Step 5. From the VLAN drop-down menu, choose a VLAN ID that the network associates with.

Step 6. In the Wireless Isolation with SSID column, check the checkbox to wirelessly isolate the SSID.

Step 7. In the WMM column, check the checkbox to enable Wi-Fi Multimedia (WMM).

Step 8. In the WPS Hardware Button column, click the radio button to map the WPS button on the front of the casing for the RV110W to the network.

Step 9. Click Save to save changes or Cancel to discard them.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco